Leatherman Free P2/P4 Club and Feedback Thread
-
-
-
-
-

-
-
-
@Olives666 said:
Love my P2. Used it over the weekend and have it with me now at work
So much so that i will sell a couple of LM’s that don’t get used as much.
Just waiting on some leather as I’ve run out, so I can design and make some sheaths/slips.Awesome to read about your experience with the P2, Olives!

Thanks for writing about it.
How much did you pay for yours and what did you not like about it when you received it?
-
-
I got my P4 a few hours ago. I quickly put it to use mounting a corner shelf.
My initial thoughts:
-This is a high quality tool. The tolerances are very tight. It most likely takes QC at Leatherman to a new level.
-As someone said earlier, it is gonna take some muscle memory to get used to it.
-The tool does not need a break in period and tons of oil.
-The phillips driver bites into the fastener.
-The scissors cut through a zip tie with little effort.
-I tested the wire stripper. When you lay it next to the tool/implements and pull it is by far the best wire stripper that I have used on a multi tool.
-The file while short, is slightly sharper than I expected. The metal saw still exists, and there is a wood file behind the metal file.
-These are not Wingman implements, but somewhat similar.
-The pry bar/package opener is stout. Real stout.
-The ruler is worthless. The tool is basically another flat driver.
-The tip on the end of the file just worked perfectly on a #1 phillips fastener.
-The awl has a sharp has a very sharp blade. I wish it had a sharp tip. I do think it will peirce leather for a belt, but will take a little more effort.
-I absolutely love the pliers and the ability of them to butterfly out. Click, click
-The tool is lighter than I expected.
More later.
-
-
I don't think these are overpriced to be honest. Consider that
-
If you are careful, you can use these tools for decades. Amortized over the lifetime of the tool, it's a good investment. The prices are a pain for collectors like us, but if you just need a good multitool in your day to day, it's worth it.
-
Don't forget that LM basically exchanged broken tools with new ones, no questions asked. It is a great service that we know and love, but that has to be priced into the upfront cost, that the user might not being one multitool, but actually two, three, four etc.
-
-
Currently carrying mine in a modified small Heritage sheath at the moment- when its not in my pocket using the pocket clip..
Used it a hand full of times at work today- Main combo blade for box opening and heavy duty banding cuts and the scissors to cut banding and straps as well.
Holds up fine and very easy to access the blade and scissors and close with one hand quickly- in order to not scare any sheaple
Planning on making a horizontal carry leather sheath, maybe with some straight lines and angles, like the new LM Leather sheaths and maybe copy some of the dimpling design from the Free's handles to put on the front/flap of the sheath?
and to try and utilize the pocket clip as well- so it clips onto the leather sheath and is then covered with the flap.Overall i would highly recommend Free P2- for ease of use and the fidget factor.
Would love to see LM Produce some in BO or even Ti scaled with S30v Blade?




-

-
@genevabuck said:
I got my P4 a few hours ago. I quickly put it to use mounting a corner shelf.My initial thoughts:
-This is a high quality tool. The tolerances are very tight. It most likely takes QC at Leatherman to a new level.
-As someone said earlier, it is gonna take some muscle memory to get used to it.
-The tool does not need a break in period and tons of oil.
-The phillips driver bites into the fastener.
-The scissors cut through a zip tie with little effort.
-I tested the wire stripper. When you lay it next to the tool/implements and pull it is by far the best wire stripper that I have used on a multi tool.
-The file while short, is slightly sharper than I expected. The metal saw still exists, and there is a wood file behind the metal file.
-These are not Wingman implements, but somewhat similar.
-The pry bar/package opener is stout. Real stout.
-The ruler is worthless. The tool is basically another flat driver.
-The tip on the end of the file just worked perfectly on a #1 phillips fastener.
-The awl has a sharp has a very sharp blade. I wish it had a sharp tip. I do think it will peirce leather for a belt, but will take a little more effort.
-I absolutely love the pliers and the ability of them to butterfly out. Click, click
-The tool is lighter than I expected.
More later.
Thank for taking the time to write this, genevabuck!

Looks like the Free is much better than the scrooges presumed(with no intention of buying) and asserted.

@NetsNJ said:
I don't think these are overpriced to be honest. Consider that- If you are careful, you can use these tools for decades. Amortized over the lifetime of the tool, it's a good investment. The prices are a pain for collectors like us, but if you just need a good multitool in your day to day, it's worth it.
- Don't forget that LM basically exchanged broken tools with new ones, no questions asked. It is a great service that we know and love, but that has to be priced into the upfront cost, that the user might not being one multitool, but actually two, three, four etc.

With all of the positive comments and reviews out there so far, we can already see the Free P2/P4 are far better than the haters want them to be. Personally, I am eagerly waiting for mine to arrive now.

@Olives666 said:
Currently carrying mine in a modified small Heritage sheath at the moment- when its not in my pocket using the pocket clip..
Used it a hand full of times at work today- Main combo blade for box opening and heavy duty banding cuts and the scissors to cut banding and straps as well.
Holds up fine and very easy to access the blade and scissors and close with one hand quickly- in order to not scare any sheaple
Planning on making a horizontal carry leather sheath, maybe with some straight lines and angles, like the new LM Leather sheaths and maybe copy some of the dimpling design from the Free's handles to put on the front/flap of the sheath?
and to try and utilize the pocket clip as well- so it clips onto the leather sheath and is then covered with the flap.Overall i would highly recommend Free P2- for ease of use and the fidget factor.
Would love to see LM Produce some in BO or even Ti scaled with S30v Blade?
More good news. Thanks, Olives!

It would be cool to see if LM makes some Free tools with other materials at some point.
-
Edit: Poster's posts corrected. Thanks, Nick.

-
OK. I just received mine as a gift so I was surprised when it came in. It’s better than I expected but not fantastic.


Th knives are nicely shaped and came moderately sharp. I touched both up and they cut well. Just wish they had better steel.


This is the side with the Philips and pry. Very thick tools and appear to be strong.

This is the Philips driver. I tried it on a few screws and it works MUCH better than I expected. Still needs a bit driver though.


The pry bar seems especially well made.

This is the awl. I tried it on some wood. If you have a small pilot hole it cuts well but I wonder how well the tip will hold up.

This is the medium driver/ruler. Looks a little thin but time will tell. It may work since there is a dedicated pry bar.

I really like the pliers. They seem to be very well made and strong.

These are the magnetic catches. They seem to work well but I wonder how much metal they will attract.


The scissors work well and are better than the Wave scissors.

I haven’t tried the saw but it looks like it will work fine.

The overall fit and finish is very good. The tools on one side did inadvertently open when I CLOSED the pliers one handed with a sharp snap. The outer tools stayed in place though.
This tool is well done but I still think it’s overpriced. The tools themselves seem no better that ST 300 quality. However, if this tool is upgraded with better knife steel, a bit driver and a t shank adapter it would be fantastic. As is, is decent but about $50-75 too expensive.
I was wrong about one thing for sure. It’s a great platform but needs a few changes to make it elite.
By the way, the sheath is definitely meh....[emoji16]
Sent from my iPhone using Tapatalk
-
-
Thank you VERY much for the photos and information, gadgetman7!

The fit & finish do appear to be top-notch.
-
I honestly had little fear that the frame would be good. The mechanism and plier head looks excellent, but the internal tools just arn't there yet for me, but I bet they will eventually come up with a bit exchanger version. Seems wierd to not incorportate their own proprietary system. I am particularly interested in a Scissor comparison to the surge, since all other scissors (minus the ones on the ORIGINAL wave) are aweful by leatherman.
I debate if I can mod some ST300 tools to slot into the tool but I wont commit to that until someone has done the horrific task of voiding their warranty and showing me the internals first. I would have been that guy..but I really have spent too much on other multi-tools lately.
Cheers,
HG.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

