Leatherman Free P2/P4 Club and Feedback Thread
-
Edit: Poster's posts corrected. Thanks, Nick.

-
OK. I just received mine as a gift so I was surprised when it came in. It’s better than I expected but not fantastic.


Th knives are nicely shaped and came moderately sharp. I touched both up and they cut well. Just wish they had better steel.


This is the side with the Philips and pry. Very thick tools and appear to be strong.

This is the Philips driver. I tried it on a few screws and it works MUCH better than I expected. Still needs a bit driver though.


The pry bar seems especially well made.

This is the awl. I tried it on some wood. If you have a small pilot hole it cuts well but I wonder how well the tip will hold up.

This is the medium driver/ruler. Looks a little thin but time will tell. It may work since there is a dedicated pry bar.

I really like the pliers. They seem to be very well made and strong.

These are the magnetic catches. They seem to work well but I wonder how much metal they will attract.


The scissors work well and are better than the Wave scissors.

I haven’t tried the saw but it looks like it will work fine.

The overall fit and finish is very good. The tools on one side did inadvertently open when I CLOSED the pliers one handed with a sharp snap. The outer tools stayed in place though.
This tool is well done but I still think it’s overpriced. The tools themselves seem no better that ST 300 quality. However, if this tool is upgraded with better knife steel, a bit driver and a t shank adapter it would be fantastic. As is, is decent but about $50-75 too expensive.
I was wrong about one thing for sure. It’s a great platform but needs a few changes to make it elite.
By the way, the sheath is definitely meh....[emoji16]
Sent from my iPhone using Tapatalk
-
Nice one gadgetman excellent pics

-
Thank you VERY much for the photos and information, gadgetman7!

The fit & finish do appear to be top-notch.
-
I honestly had little fear that the frame would be good. The mechanism and plier head looks excellent, but the internal tools just arn't there yet for me, but I bet they will eventually come up with a bit exchanger version. Seems wierd to not incorportate their own proprietary system. I am particularly interested in a Scissor comparison to the surge, since all other scissors (minus the ones on the ORIGINAL wave) are aweful by leatherman.
I debate if I can mod some ST300 tools to slot into the tool but I wont commit to that until someone has done the horrific task of voiding their warranty and showing me the internals first. I would have been that guy..but I really have spent too much on other multi-tools lately.
Cheers,
HG. -
I just noticed that the scissors need to be open for the lock to disengage.
-
@NetsNJ said:
I don't think these are overpriced to be honest. Consider that- If you are careful, you can use these tools for decades. Amortized over the lifetime of the tool, it's a good investment. The prices are a pain for collectors like us, but if you just need a good multitool in your day to day, it's worth it.
- Don't forget that LM basically exchanged broken tools with new ones, no questions asked. It is a great service that we know and love, but that has to be priced into the upfront cost, that the user might not being one multitool, but actually two, three, four etc.
Totally agree
-
Thanks gadgetman7 for your comprehensive initial review

-
Let's make one thing clear , anyone can post in any thread here on MTO. You will just have to take any comments that come even if this thread was started with the intention of only having people who own or are going to order a Free. That just isn't the way things work around here nor should it be. This is a forum for discussing tools, the good the bad and the ugly.
I don't like the fact that Nick felt the need to delete his comments that were posted in this thread. There was nothing wrong with his comments and he shouldn't have felt pressured to delete them. :(
carry on
-
@gadgetman7 said:
The tools on one side did inadvertently open when I CLOSED the pliers one handed with a sharp snap. The outer tools stayed in place though.
Sorry, I'm a little confused by this. I thought they were all outer tools. What opened, and what didn't?
Otherwise, great overview. Thanks for your thoughts and pics

-
@SteveC said:
Let's make one thing clear , anyone can post in any thread here on MTO. You will just have to take any comments that come even if this thread was started with the intention of only having people who own or are going to order a Free. That just isn't the way things work around here nor should it be. This is a forum for discussing tools, the good the bad and the ugly.I don't like the fact that Nick felt the need to delete his comments that were posted in this thread. There was nothing wrong with his comments and he shouldn't have felt pressured to delete them. :(
carry on

-
Thanks for the great pics here guys, keep'em coming
.And I must say, it sure does look very nice ...

And the price, oh well, it won't be available here until august anyway, so I still got some time to get my Free P4 budget back on track.
And my birthday is in august, so I better start sending out some subtle messages to Misses "TG-24" already ...
. -
I’m even more excited now, and mine should be here at home waiting for me when I get home from work tomorrow

-
Sorry, I'm a little confused by this. I thought they were all outer tools. What opened, and what didn't?
Otherwise, great overview. Thanks for your thoughts and pics

They are on the inside when the pliers are open. When I closed the pliers with one hand I used a hard snap. The Philip’s and pry bar popped out a little. The knife and scissors did not come out.
Hope that makes it clearer.
Sent from my iPhone using Tapatalk
-
I wonder what the engraving I circled in blue on the ruler/screwdriver means. Maybe a tool adapter?

Sent from my iPhone using Tapatalk
-
@gadgetman7 said:
I wonder what the engraving I circled in blue on the ruler/screwdriver means. Maybe a tool adapter?
Sent from my iPhone using Tapatalk
I guess it's there to point out what looks to be a wire stripper.
-
Crunch owners will recognize that drawing ;).
-
@gadgetman7 said:
I wonder what the engraving I circled in blue on the ruler/screwdriver means. Maybe a tool adapter?
It is a wire stripper and works very well. You need to fold it down onto the tool, turn it a few times and pull.
Sent from my iPhone using Tapatalk
-
Makes sense. I’ve never used the wire stripper function because I typically use knife or my old electrician’s tool. I should have known though since there’s one on the SAK bottle opener too.
I’ve played with the tool some more and it is very well made. Lockup is the best of any multitool I’ve seen. Rock solid. It’s growing on me.
I have to assemble some SAR gear tomorrow so we’ll see how it goes. I’ll have a Charge with a bit kit available in case I need torx bits.
I have decided the sheath is bad. It sits too high and there is no accommodation for horizontal carry. Oddly, the sheath is made in China. Kind of funny since they made a big deal about the tool being made in the USA.
Sent from my iPad using Tapatalk
-
@gadgetman7 said:
Makes sense. I’ve never used the wire stripper function because I typically use knife or my old electrician’s tool. I should have known though since there’s one on the SAK bottle opener too.I’ve played with the tool some more and it is very well made. Lockup is the best of any multitool I’ve seen. Rock solid. It’s growing on me.
I have to assemble some SAR gear tomorrow so we’ll see how it goes. I’ll have a Charge with a bit kit available in case I need torx bits.
**I have decided the sheath is bad. It sits too high and there is no accommodation for horizontal carry. Oddly, the sheath is made in China. Kind of funny since they made a big deal about the tool being made in the USA. **
Sent from my iPad using Tapatalk
For the price they are asking it should come with a nice made in the US leather sheath IMO .
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login