The Tool Box/Bag Thread
-
Here are a couple more that I pulled from the spares shelf just waiting to be loaded up and thrashed around some more!
This is a classic Bell System Box and I have reconstructed it already a few times as the plastic cracks and the corners fall apart usually. They still make a box that looks like these but as usual they are really not as nice as even this almost worn out specimen either?
Before 9/11 I used tho carry this on the plane too but that ship has long since sailed for good.



-
This one is an older Pelican Case that has been modded for EMS use and is perfect for Technician use too.
I stuff this one once and a while still and it travels pretty well as do all Pelican Cases that I have used.
All Pelican Cases can be the perfect platform for a tool box I think.I used to carry this on a plane as well.





-
Those are some very awesome boxes, ez :o

-
Small tool box in my desk



-
I want to try pbswiss bet you can get a lot done with that.
Sent from my SM-G960F using Tapatalk
-
The tool bag I keep in my room to handle most smaller tasks. There's some cheap low-end junk in here, but it will be replaced soon. I bought the bag for $5 in the cheap tool bin at the local Advance Auto Parts. So far, it's held up pretty darned well. My name's written on the outside, and for many of the tools inside, my great-grandfather or my grandfather's name is stamped or engraved in some form on them. The rest I can easily recognize based on damage, paint spatter, etc. I've said to myself--if I see any of these tools on some flea market dealer's counter, I'm picking up the biggest one and warping that individual a new one with it.

Outside L: unmarked electrician's scissors (sold as old-stock Clauss USA), Kobalt long nose electronics pliers (indispensable in tight places) , Channellock E-318 electrician's pliers (some of my favorite general purpose pliers), Proto 226G needlenose side cutting pliers (electrical tape covers up chunk melted out of handle), Kobalt Side Cutters (will eventually be replaced by Knipex, but at least with these cheap ones, it's harder to get ticked if someone messes them up).

Outside R.
Kobalt Linesman's (I have a good Proto pair used with fence work, but the Kobalt are what I loan out), Chapman 1316 "All Purpose" set (needs some bits replaced; and the case is worn out, thus the electrical tape where it folds in half), and an Antonini (Italian made) Cable Master knife.

Inside. Didn't take anything out as it is stuffed and tough to put back. Inside is a Plierrench, Belknap claw hammer, Craftsman soft face hammer, 6" Crescent Tool USA Crescent Wrench; Craftsman USA 1/4 bit driver, tire gauge, Allen key set (Eklind), Petersen 6LN Vise Grips, several screwdrivers and few other pliers (and some other stuff)

-
Nice setup, nice scissors, I got the same pair laying around somewhere?
JR -
Kinda funny but when I first saw the bag I thought it was a bowling bag

JR -
Neat idea for thread.
I have several boxes, yet was able to access three just now for pictures.
A Kennedy machinists chest -
Presently used for bike cycle restoration and top side gathers what ever falls onto it until I get back to biking.A Red Craftsman, (road in my work truck till I retired)
sitting on a old Kennedy traditional.Under my work table is a Traditional Grey Craftsman, a wood square hip style box used for tube TV service. A Black attaché style tool grip.
At my Mom’s is my Dad’s Kennedy Hip box he used for his paint brushes after I modified the drawers. (At least 45 yrs old). When in college I worked for a SK, Proto, (tools), Kennedy box distributor. Plus Kennedy Mfg factory outlet store was down the road from me in Ohio.
Sent from my iPhone using Tapatalk
-
Nice boxes LC,
I had two craftsman boxes just like that one, just one had three draws and the other had four,I should go look in the garage, there was a simple box that had some sockets from when we bought the house, idk if it’s any good or what name?
JR -
@LoopCutter said:
Neat idea for thread.I have several boxes, yet was able to access three just now for pictures.
A Kennedy machinists chest -
Presently used for bike cycle restoration and top side gathers what ever falls onto it until I get back to biking.A Red Craftsman, (road in my work truck till I retired)
sitting on a old Kennedy traditional.Under my work table is a Traditional Grey Craftsman, a wood square hip style box used for tube TV service. A Black attaché style tool grip.
At my Mom’s is my Dad’s Kennedy Hip box he used for his paint brushes after I modified the drawers. (At least 45 yrs old). When in college I worked for a SK, Proto, (tools), Kennedy box distributor. Plus Kennedy Mfg factory outlet store was down the road from me in Ohio.
Sent from my iPhone using Tapatalk
I've been wanting a Kennedy really bad since I've started watching mrpete222. I can't find anything locally with a reasonable price or with the samll side by side drawers. I've never seen one with those kinds of pulls, if you get the chance please show the contents, nice chests by the way!!
-
Thank you.
I will take a picture after I convert my garage from winter duty to summer duty.This one I found at a garage sale, paid about $80. The lady’s father was a machinist at a axle company.
I have also, spotted a box or two at Pawn shops for more money, yet older models and smaller.
I really wanted my father-n-law’s set, a three tier combo on casters, but oldest sister-n-law gave away to her dad’s coworker who offered only about 25 cents on the dollar for all his tools and cabinets. Made me sick. He had been a die and mold maker for almost 40 years.
Where are you located?
Sent from my iPhone using Tapatalk
-
New to me tool box

Sent from my SM-G960F using Tapatalk
-
Some old tool boxes page one
#1 - #3 Keen Kutter(Shapleigh Hardware)salesman's sample case.
#4 Sherman-Klove(S & K) machinists' tool box.



-
Page two
#1 Craftsman tool box with tools circa 1940's or slightly earlier.
#2 Craftsman round top that looks like a mailbox. I have two different versions of this one.
#3 A hand made box made by the father of a good friend of mine.I lettered it to look like a box from his grandfather's sign company and gave it back to him.
#4 One of the weirdest looking boxes I have ever seen. Bought at a yard sale full of old Ford wrenches.



-
Page three
#1 Dunlap machinists' style tool box.
#2 S&K tool box.
#3 & #4 an unmarked 3 tier tool box open and closed.



-
Page four
#1 & #2 A huge Philson tackle box.
#3 & #4 an unmakred tool box that automatically opens when you lift the handle.



-
Those are some wacky definitely cool toolbox’s!
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login