Leatherman Free P2/P4 Club and Feedback Thread
-
@Wspeed said:
I am hoping that any other new models LM will make
Will have a bit holder and the blade exchanger
We've already got the best LMs ever made, and are using them an entire 30-day run. And they don't come in grey sheaths.

The Free, to me anyway, is an urban type carry with mad fiddle-factor. A P2 should be waiting for me when I get home from work.

-
Nice one GLBM can’t wait to see what you think of the Free

-
In that video above at around the 36.28 mark the tools comes flying out as he's trying to butterfly open the pliers :ahhh
-
@SteveC said:
In that video above at around the 36.28 mark the tools comes flying out as he's trying to butterfly open the pliers :ahhhI just tried a P2. Same issue if you snap the pliers open. Not an issue on the P4. Does not bode well for their QC. The video didn’t load but the picture shows the result.

Sent from my iPhone using Tapatalk
-
Borrowing the P2 tomorrow. Just playing with it I see no significant advantage over a Skeletool, CX except for scissors. I don’t use the pliers that much so more robust pliers don’t help. I’ll post again tomorrow about the P2.
The P4 doesn’t work for assembling the SAR gear. Too many torx screws. Also, the file did not work well when I tried to file down a metal buckle. Kind of thinking these may end up as novelties but I’ll carry them a few more days.
Sent from my iPhone using Tapatalk
-
@gerleatherberman said:
We've already got the best LMs ever made, and are using them an entire 30-day run. And they don't come in grey sheaths.
The Free, to me anyway, is an urban type carry with mad fiddle-factor. A P2 should be waiting for me when I get home from work.


-
@gadgetman7 said:
I just tried a P2. Same issue if you snap the pliers open. Not an issue on the P4. Does not bode well for their QC. The video didn’t load but the picture shows the result.
Sent from my iPhone using Tapatalk
I haven’t had that issue yet at least. Maybe depends on how forcefully the handles are snapped into place? I’m going to try mine more to see.
-
I'm sure it will thrill GLBM to know that I am somewhat more chipper about the Free series, having seen that Roy Grey or whatever his name was video of the thing. I looks better in his hands that it did in any of the gits who were spruiking it during the pre-release.
Still no intention of buying one - it'll be at least another 12 months, possibly longer, before the stars align and A. I am in a mood to buy a new multi and B. A local retailer has a sufficiently attractive sale to make the purchase start to look like acceptable value*.
possibly even that long before I get a chance to see one in the flesh.
None the less, though I still have some doubts about a few points, the live-action video suggests that LM has made a decent effort at a tool that might cover daily/odd jobs.
*This is not entirely LMs fault, there's a fair bit of price creep between the manufacturer and the retailer in Oz....
-
thrilled indeed, Sea Monster. 
To the P2.
I've been sitting around playing with the P2 for a bit. I feel the tool is worth the cost for sure. Not as excited as I hoped to be, but that is my problem, not the tool's. Going forward;
The tool is built very well and the QC is outstanding. The design should be worthy of MT of the year, because of HOW cool the engineering involved is. I have a lot of respect for the design, QC, function, and USA-manufacturing. It isn't going to dethrone my Charge anytime soon(since the magnet would get steel wool dust on them at my job, but I may try it anyway), but it sure is a kickazz tool. Very well made and fun to play with. VERY FUN.Swinging the plier out gently, as is directed will not pop any tools out. At least not on my example. You're supposed to swing the handles out gently and then slowly click the handles into place anyway. I cannot get mine pop any tools out with realistic usage motions.
If you bought one (or thinking of buying one) and are worried about that, just swing it open and pop the pliers into place holding the side with the awl. That'll lessen the momentum incurred by aggressive flipping. The side with the blade is tighter and doesn't really have any possible hazards(the sharp package edge on the flat driver would be almost impossible to get your finger on this way). The blade is blocked from opening when the pliers are engaged, so that won't be an issue. The only tool that would cut you, if you are completely oblivious to using the tool(which tools should always be taken seriously), is the awl. But, that said, it isn't quite as much of an issue as is being worried about here. I hope that helps explain it and possible methods to reduce possible partial opening.
You could always use two security torx bits to tighten the pivot a little, if you're worried about any tools popping open when slipping the pliers or cutting something thick. But, if LM had made the tools tighter, then they wouldn't be easily opened OH and people would be talking about how tight they are. Catch-22.Sidenote: I'll probably regret even posting about getting mine and writing what I think.

P2 pics. They're not very good, since several members have posted gorgeous photos already.



-
@gerleatherberman said:
thrilled indeed, Sea Monster. 
To the P2.
I've been sitting around playing with the P2 for a bit. I feel the tool is worth the cost for sure. Not as excited as I hoped to be, but that is my problem, not the tool's. Going forward;
The tool is built very well and the QC is outstanding. The design should be worthy of MT of the year, because of HOW cool the engineering involved is. I have a lot of respect for the design, QC, function, and USA-manufacturing. It isn't going to dethrone my Charge anytime soon(since the magnet would get steel wool dust on them at my job, but I may try it anyway), but it sure is a kickazz tool. Very well made and fun to play with. VERY FUN.Swinging the plier out gently, as is directed will not pop any tools out. At least not on my example. You're supposed to swing the handles out gently and then slowly click the handles into place anyway. I cannot get mine pop any tools out with realistic usage motions.
If you bought one (or thinking of buying one) and are worried about that, just swing it open and pop the pliers into place holding the side with the awl. That'll lessen the momentum incurred by aggressive flipping. The side with the blade is tighter and doesn't really have any possible hazards(the sharp package edge on the flat driver would be almost impossible to get your finger on this way). The blade is blocked from opening when the pliers are engaged, so that won't be an issue. The only tool that would cut you, if you are completely oblivious to using the tool(which tools should always be taken seriously), is the awl. But, that said, it isn't quite as much of an issue as is being worried about here. I hope that helps explain it and possible methods to reduce possible partial opening.
You could always use two security torx bits to tighten the pivot a little, if you're worried about any tools popping open when slipping the pliers or cutting somethong thick. But, if LM had made the tools tighter, then they wouldn't be easily opened OH and people would be talking about how tight they are. Catch-22.Sidenote: I'll probably regret even posting about getting mine and writing what I think.

P2 pics. They're not very good, since several members have posted gorgeous photos already.



Totally agree with your comments especially about the opening method the more I play with mine the more I love it

-
Awesome! Glad you like it!

It’s good to know the popping open may not be as big a safety concern as I initially thought. I also didn’t realize the blades were prevented from opening. Good stuff.
As far as metal stuff getting on the magnets, how easy do you think they would be to clean off? Are they pretty easy to access?
-
On my P4 the inside tools opening doesn’t seem to be much of an issue. The P2 inside tools with the file can pop out when using the same force to lock the pliers in place as I use on my Charge. Swinging the handles hasn’t opened either the P4 or P2 tools - it’s when clicking the pliers into place that it happens. If the P2 were mine I’d tighten the pivot but as it is a loaner I’ll leave it alone. I don’t think it’s a safety issue, just annoying on a $120 tool.
On the other hand, my whining about the cost of the tool(s) is a bit ridiculous since I have several Chris Reeve and Hinderer knives. [emoji57]
Sent from my iPad using Tapatalk
-
@gerleatherberman said:
thrilled indeed, Sea Monster. 
To the P2.
I've been sitting around playing with the P2 for a bit. I feel the tool is worth the cost for sure. Not as excited as I hoped to be, but that is my problem, not the tool's. Going forward;
The tool is built very well and the QC is outstanding. The design should be worthy of MT of the year, because of HOW cool the engineering involved is. I have a lot of respect for the design, QC, function, and USA-manufacturing. It isn't going to dethrone my Charge anytime soon(since the magnet would get steel wool dust on them at my job, but I may try it anyway), but it sure is a kickazz tool. Very well made and fun to play with. VERY FUN.Swinging the plier out gently, as is directed will not pop any tools out. At least not on my example. You're supposed to swing the handles out gently and then slowly click the handles into place anyway. I cannot get mine pop any tools out with realistic usage motions.
If you bought one (or thinking of buying one) and are worried about that, just swing it open and pop the pliers into place holding the side with the awl. That'll lessen the momentum incurred by aggressive flipping. The side with the blade is tighter and doesn't really have any possible hazards(the sharp package edge on the flat driver would be almost impossible to get your finger on this way). The blade is blocked from opening when the pliers are engaged, so that won't be an issue. The only tool that would cut you, if you are completely oblivious to using the tool(which tools should always be taken seriously), is the awl. But, that said, it isn't quite as much of an issue as is being worried about here. I hope that helps explain it and possible methods to reduce possible partial opening.
You could always use two security torx bits to tighten the pivot a little, if you're worried about any tools popping open when slipping the pliers or cutting something thick. But, if LM had made the tools tighter, then they wouldn't be easily opened OH and people would be talking about how tight they are. Catch-22.Sidenote: I'll probably regret even posting about getting mine and writing what I think.

P2 pics. They're not very good, since several members have posted gorgeous photos already.



Nice, glad you enjoy it man!
-
@gilson65 said:
Totally agree with your comments especially about the opening method the more I play with mine the more I love it.
Thank you, gilson!

It is quite a unique tool for sure.@gustophersmob said:
Awesome! Glad you like it!
It’s good to know the popping open may not be as big a safety concern as I initially thought. I also didn’t realize the blades were prevented from opening. Good stuff.
As far as metal stuff getting on the magnets, how easy do you think they would be to clean off? Are they pretty easy to access?
Thank you, gustophersmob!

A good quality packing tape could probably get the metal dust off. Luckily the metal doesn't get into the pivot, just onto the retainer magnets. :)@gadgetman7 said:
On my P4 the inside tools opening doesn’t seem to be much of an issue. The P2 inside tools with the file can pop out when using the same force to lock the pliers in place as I use on my Charge. Swinging the handles hasn’t opened either the P4 or P2 tools - it’s when clicking the pliers into place that it happens. If the P2 were mine I’d tighten the pivot but as it is a loaner I’ll leave it alone. I don’t think it’s a safety issue, just annoying on a $120 tool.On the other hand, my whining about the cost of the tool(s) is a bit ridiculous since I have several Chris Reeve and Hinderer knives. [emoji57]
Sent from my iPad using Tapatalk
It is funny. The more I play with it, the more I think the price may be justifiable. It feels refined like a $150 folding knife in certain aspects. But, that said, an incredibly more complex construction is cheaper than some good folders. IMO of course.
Very cool you have the Reeves and Hinderer knives. Some serious bladage there.

Thank you, Monrogue!

Has anyone else noticed that the tools actually DO NOT have true clumping(sorry if I missed someone mentioning that)? The tools all come out when the tangs are pressed as a bunch, BUT, pulling(or using a finger nail individually) each one out, they don't clump. Kind of cool. :)
Edit:
I will say, as far as right now, my only issue is the short file. But, that said, I like the full sized scissors and thin profile as the trade-off. -
https://www.youtube.com/watch?v=1h_pn6EpWpQ&feature=share
Really good video on the free p4
-
On my St 300 that's very broken in and opens with a flick the tools always fly out on one side. I tighten the screw but after a while flicking it gets loose again. This also happens on every single SOG with the assisted opening(granted that's only been 3 tools) that I've owned.
-
I had to stop watching that video when he said he couldn't tell the difference in knife edges on the New Wave, because they looked identical.

-
@gerleatherberman said:
I had to stop watching that video when he said he couldn't tell the difference in knife edges on the New Wave, because they looked identical.
seriously, just install the pocket clip and problem solved...there's also gimping on the serrated blade spine, it's really a non issue.
-
@Blackbeard said:
seriously, just install the pocket clip and problem solved...there's also gimping on the serrated blade spine, it's really a non issue.Indeed. I like the guy's approach to the video, but it is obvious he isn't an enthusiast.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login