Any love for the Craftsman?
-
@Thunderpants said:
Well the old corkscrew vs screwdriver argument is one which never goes away. I used to favour the Phillips (so I bought a Craftsman, not knowing it would one day be discontinued) - in the end I realised a screwdriver on the back of a SAK isn't very useful. If you know anyone who drinks wine, even if it's once a year at Christmas, having a corkscrew is kind of essential. A corkscrew, if used properly, never wears out - while a Phillips only has to be used a few times, clumsily, and the end is ruined.Both the Handyman and Craftsman are terrific knives. They have a little pliers which the Master Craftsman doesn't have. Makes it a bit chunky.
....but how often do you see a bottle of wine with a cork nowadays? I have a few old ones that I'm keeping, I wouldn't really like to open them.
I will have to build a Crafsman myself which should make it sweeter for me.... my original plan was to swap the corkscrew for a philip screwdriver on my Ranger but I'm thinking that I should probably take it further and let my Deluxe Tinker be the donor of its plier and Philip screwdriver and turn my Ranger into a Crafsman :D ..... alternatively... get a Swisschamp and swap the corkscrew for a philip screwdriver and remove the fish thingy, magnifying glass and in-line philip screwdriver..... although I wouldn't mind keeping the last 2 tools.
The old philip screwdriver is much more interesting than the new version..... again, what was the thinking behind the change?
My wife is observing how this new hobby of mine develops :-) she was asking why I needed a Crafsman when the Deluxe Tinker and Ranger have everything I'd have with a Crafsman :D ..... I think she knows where this is going, she's seen it all before :D over the last 25 years I've collected cowboy boots, bicicles, double edge razors, straigh razors, fountain pens...... well, I still regularly ride bicycles, shave with DE and straight razors, write with fountain pens and occasionally wear cowboy boots so nothing has been waisted :D
-
^^^ Long suffering and knowing wife! :D ^^^
-
Absolutely :D
She's not complaining though :D I built her a bike and now she joins me in day long rides and she loves me clean shaved everyday :D after years of growing a beard.... only because I got bad irritation with the electronic razor.... as long as I don't start collecting Rolex watches I'll be OK I think :D
Is there a place that sells SAK individual tools?
-
@Ranger said:
Is there a place that sells SAK individual tools?The best place I know is called Multitool.org!! ...... Seriously modders do have spares from time to time, but availability depends on whether it is a common or rare part - Syph at one time had dozens of Spartan toolsets and hundreds of corkscrews
Otherwise - as you suggested - get a cheap donor from ebayVictorinox have stated that they will never sell individual tools - as they are not into the modding / self-build market
- So parts are not commercially available!
-
@Ranger said:
....but how often do you see a bottle of wine with a cork nowadays? I have a few old ones that I'm keeping, I wouldn't really like to open them.I'm always confused when I see people say this. Most of the wine that I buy still comes with a cork, and I'm no connoisseur--I rarely spend more than $9 on a bottle.
- FiL
-
Norway here, corked bottles are very common. Also, I think what I'm seeing more and more is a mix of synthetic corks and natural corks, while screw caps seem to not have starting dominating the way I expected years back. Synthetic corks solve the problems of price and reliability, while natural cork is the conservative choice for long term conservation and the “proper image”. The screw caps seemed to have been squeezed (pun not intended) by bag in box wines. Also, synthetic cork probably lets you use the same tapping line as the old line for natural cork?
Disclaimer: I have done zero research and I'm very much more of a beer drinker than a wine drinker anyway. I'm just reporting my very non-scientific impression looking in the stores.
Frankly, I think I see a corked bottle more often than I see a Philips which is both accessible by the back mounted driver and where the back mounted driver is a good choice of tool. Torx and Pozidriv seem to have displaced Philips from a lot of places where it used to be the norm, and the remaining larger Philips seem to “always” be placed either recessed or in a corner, or simply be intended for large strength.
I think the screwdriver is the vinyl record of SAK tools. Many people say it's outdated, but it'll probably outlive both the cap lifter and the can opener. Actually, at least one super market chain here is actively working to phase out cans here the end of 2022, at least from their in-house brand. The cans are costly for the chains, since they are heavy and round cans pack worse than rectangular Tetrapak and similar packaging solutions.
But, as I said, it's just my impression, and the world is a large place. For instance, here beer is either in a box or you need an opener, any kind of screw cap on a beer bottle is exceedingly rare. And as an another example, I know a lot of members who would scream of murder if Vic discontinued the can opener. As I've already drifted majorly off topic, I'd really like a Spartan style of knife with a hawkbill blade where the can opener currently is. I'm very happy with my alox knives with hawkbill, but I'd love a 91 mm with the blade tools: large blade + pen blade + hawkbill + keep the large screwdriver for beer bottles and general prying duty. (I know, I'm pretty lonely in that regard. :) )
Oh, and I love my Craftsman. Very happy I snatched one before they became harder to get.
-
@Steinar said:
Norway here, corked bottles are very common. Also, I think what I'm seeing more and more is a mix of synthetic corks and natural corks, while screw caps seem to not have starting dominating the way I expected years back. Synthetic corks solve the problems of price and reliability, while natural cork is the conservative choice for long term conservation and the “proper image”. The screw caps seemed to have been squeezed (pun not intended) by bag in box wines. Also, synthetic cork probably lets you use the same tapping line as the old line for natural cork?Disclaimer: I have done zero research and I'm very much more of a beer drinker than a wine drinker anyway. I'm just reporting my very non-scientific impression looking in the stores.
Frankly, I think I see a corked bottle more often than I see a Philips which is both accessible by the back mounted driver and where the back mounted driver is a good choice of tool. Torx and Pozidriv seem to have displaced Philips from a lot of places where it used to be the norm, and the remaining larger Philips seem to “always” be placed either recessed or in a corner, or simply be intended for large strength.
I think the screwdriver is the vinyl record of SAK tools. Many people say it's outdated, but it'll probably outlive both the cap lifter and the can opener. Actually, at least one super market chain here is actively working to phase out cans here the end of 2022, at least from their in-house brand. The cans are costly for the chains, since they are heavy and round cans pack worse than rectangular Tetrapak and similar packaging solutions.
But, as I said, it's just my impression, and the world is a large place. For instance, here beer is either in a box or you need an opener, any kind of screw cap on a beer bottle is exceedingly rare. And as an another example, I know a lot of members who would scream of murder if Vic discontinued the can opener. As I've already drifted majorly off topic, I'd really like a Spartan style of knife with a hawkbill blade where the can opener currently is. I'm very happy with my alox knives with hawkbill, but I'd love a 91 mm with the blade tools: large blade + pen blade + hawkbill + keep the large screwdriver for beer bottles and general prying duty. (I know, I'm pretty lonely in that regard. :) )
Oh, and I love my Craftsman. Very happy I snatched one before they became harder to get.
if my recollection serves me well, I remember somebody pointing out, while walking in Oslo, the single place where people can buy wine and spirits..... the government has that monopoly and a bottle of wine is very expensive to buy, at least that's what my friend says so when he comes to visit us we make sure he goes back with plenty of bottles of wine :D
Plastic corks were in fashion quite a few years ago, before screw caps, you can still find them through.
On my cycling trips I carry a multitool that has mainly Alan keys, a T25 and 2 screwdrivers, one of each.... 4,5, and 6 hex keys are the most common tools you need on a bike and I'd love to have a SAK with those tools, having said that, my Deluxe Tinker complements the multitool very well I think.
When was the Craftsman discontinued ?
-
SAKWiki | Craftsman
SAKWiki - The online Swiss Army Knife Encyclopedia. Information and Identification on Swiss Army Knives by Victorinox and Wenger.
SAKWiki (sakwiki.com)
History section - If anyone knows better let me know and we'll update
-
A lost opportunity was Sears having a Craftsman Craftsman made up. They did a Tinker, so why not the Craftsman?
-
It's great to see this thread getting some attention again! I'm going to break out my Master Craftsman and Craftsman again and have some fun :D
-
@Ranger said:
if my recollection serves me well, I remember somebody pointing out, while walking in Oslo, the single place where people can buy wine and spirits..... the government has that monopoly and a bottle of wine is very expensive to buy, at least that's what my friend says so when he comes to visit us we make sure he goes back with plenty of bottles of wine :DYeah, that's pretty much the short and simple version of it. (But that monopoly has many shops in Oslo (and elsewhere in the country, obviously), it's not one shop for the entire city. :) )
-
Here's a pic of my Master Craftsman. I'll post a pic of my Craftsman later. It's a great all around carry!

-
I know it Cody! I can always dream it fell out of a load kit!
-
It sure is Ranger! I posted a pic of it a couple posts back.
-
@Huntsman said:
https://sakwiki.com/tiki-index.php?page=CraftsmanHistory section - If anyone knows better let me know and we'll update
I don't know the 'official' discontinuation date, but that page needs LOTS of fixin'.
Big fan of the entire Craftsman/Master Craftsman line. Just got an early-mid 60's 136mU.
-
@Huntsman said:
Although I never understood how the Master could be the smaller one !!!It never was. At any point in production history, it was bigger than the Craftsman (mistakenly called an Artisan). Literally bigger when you consider it was 84mm and the Master Craftsman was 91mm. <u>All</u> the US catalogs support this thinking, back to the early 50's. And I suspect earlier.
While they had the same basic tool configuration, I don't think any of the Space Shuttle or Astronaut models were really ever officially Master Craftsman models as I suspect the name was retired before then. I think they should have a separate page. Possibly c.'72 retirement for the Master version, but the fish scaler version may have briefly been a Master Craftsman as listed in the '76 dealer sheet. But of course, that one example could be an error.
Personally, I think the Craftsman 'family' should include all 136X and 136kX variants when referred to in the Wiki...even if just as 'related knives'. I know that would complicate things the way the Wiki is currently outlined/structured.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Even better is that seems to be just right for the same era of Master Craftsman NASA bought for the Space Shuttle missions.