NexTool Flagship Multitool - Looks good!
-
Review and comparison with OUTU
/topic/76078 -
It appears there is an upgraded version available (the one I found is Xiaomi branded)
It has replaceable wire-cutters, but most interestingly, it appears that you can completely disasemble it.



-
Don't tell me the only phillips is that thing on the gut hook.

Apart from that, it looks quite tidy.

-
@Fuzzbucket said:
Don't tell me the only phillips is that thing on the gut hook.
Apart from that, it looks quite tidy.

I guess as you are gutting something and see a Phillips screw that needs tightening you can be very accomodating :D
It looks pretty cool and useful overall though :o

-
:ahhh :ahhh :ahhh
That looks so nice! I do not mind the guthook Phillips, although the Phillips on the original Flagship is very robust.
I hope the cutters are actually removable and not like on the Roxon Storm.In any case, this is another new design with the monster scissors.

-
Oh baby! Hard wire-cutters and glass breaker too?

And the bottle opener removes the entire bottle. :D


-
Here is the new KT5020(licensed by/made by Xiaomi?), next to the OUTU, looks pretty nice, a little bit bigger, not much
got my coupon code here (I'm not associated with them) got it shipped for $28.xx
https://couponsfromchina.com/2019/02/11/xiaomi-nextool-16-1-multitool-coupon-price-[url=http://forum.multitool.org]multitool[/url]/ -
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
RP,
To be completely honest, the Roxon 801 seems like a way better tool overall. The NexTool looks cool, but the drivers are awful looking and the frame looks less refined than the Roxon 801. So, besides a hard-wire thing in the back of the pliers pivot, replaceable cutters(if you can even buy extras), a longer PE blade, slightly better can opener, and locking saw; what is the point? You lose the nice Roxon file(with nice driver on tip), fantastic bottle opener, corkscrew, locking phillips driver(which mounts the bit driver), and the nail puller. Am I missing something?

-
@gerleatherberman said:
RP,To be completely honest, the Roxon 801 seems like a way better tool overall. The NexTool looks cool, but the drivers are awful looking and the frame looks less refined than the Roxon 801. So, besides a hard-wire thing in the back of the pliers pivot, replaceable cutters(if you can even buy extras), a longer PE blade, slightly better can opener, and locking saw; what is the point? You lose the nice Roxon file(with nice driver on tip), fantastic bottle opener, corkscrew, locking phillips driver(which mounts the bit driver), and the nail puller. Am I missing something?

The Roxon is great but it really really really should have a pocket clip! & locking saw blade
-
@BauerMobileToolSystems said:
The Roxon is great but it really really really should have a pocket clip! & locking saw bladeAh, I missed the pocket clip when I was thinking about the NexTool. :ahhh
I guess the weird drivers are my biggest turn off. The Roxon phillips/adapter mount locks.
-
There's a few points of interest to me, and I am probably going to get the Xiaomi. Let me explain.
First of all, I have the original NexTool Flagship. It would be great to compare it to the Xiaomi upgrade, and see how the quality is.
Also, the Xiaomi looks a little bulkier, as I see it in the video. The original Flagship is quite slender, great for pocket-carry.I cannot open the original's blade one-handed. They messed up to opening hole. From what I've seen, this is no longer an issue.
The saw is better on the Xiaomi. On the original, they left a lot of the edge without teeth. And it locks on the Xiaomi.There are new features on the Xiaomi. Glass-breaker, though i have never seen one like that. Sure, it is not as pointy as a carbide one, but then again, how well would it work?
Replaceable wire-cutters. I am assuming they made them like that so you could put LM ones in there. The shape is the same. I have asked reviewers about this, but nobody has tested if the Xiaomi can have LM wire-cutters. If it can, that's great news, provided the pliers are actually decent.
Openers. Not really thrilled to see these added to it, since we lost the drivers that the original had. The Phillips in particular was very robust.I am very excited to see this design taken a step further. The Flagship was nice, definitely better than the Outu. And now there's an updated version, with new features even.
-
Will be looking forward to reading your review of it, RP!

-
@gerleatherberman said:
RP,To be completely honest, the Roxon 801 seems like a way better tool overall. The NexTool looks cool, but the drivers are awful looking and the frame looks less refined than the Roxon 801. So, besides a hard-wire thing in the back of the pliers pivot, replaceable cutters(if you can even buy extras), a longer PE blade, slightly better can opener, and locking saw; what is the point? You lose the nice Roxon file(with nice driver on tip), fantastic bottle opener, corkscrew, locking phillips driver(which mounts the bit driver), and the nail puller. Am I missing something?

The Rebar is a way better tool than the Coast MT, but I bought the Coast anyway. :P
I have gottten quite a few MTs that were obviously inferior to others I already owned. But then again, some are fine. The off-brands have come a long way.Compared to the Roxon Storm, the Xiaomi lacks a thing or two. The main loss is the great Phillips, which locks and also takes the bit adapter. The Xiaomi even loses the great Phillips of the original Flagship.
I am very interested to see if I can fit LM wire-cutters in the Xiaomi. That would be nice.
The main benefit when compared to the Storm, however, would be the weight. The Xiaomi is lighter, and has a pocket-clip, so it will be easier to edc. Sure, you lose a couple of stuff, mainly the bits, but then again, I have carried other MTs that do not have bits.From what I can see in the videos of the Xiaomi, fit and finish seems decent. I think better than the original Flagship. Plus a glass-breaker and replaceable wire-cutters which I'd like to test. Cord cutter, whatever. Could have been a nice reamer.
It is definitely interesting, though. Another MT with the massive scissors.

-


The can opener seems to be placed too deep in the handle.

-
Hmmm... reminds me of the swap trick I had to do on my Roxon to bring the can opener towards the edge of the handle. Earlier models had that problem. Copycats >:D
-
@ReamerPunch said:
The Rebar is a way better tool than the Coast MT, but I bought the Coast anyway. :P
I have gottten quite a few MTs that were obviously inferior to others I already owned. But then again, some are fine. The off-brands have come a long way.Compared to the Roxon Storm, the Xiaomi lacks a thing or two. The main loss is the great Phillips, which locks and also takes the bit adapter. The Xiaomi even loses the great Phillips of the original Flagship.
I am very interested to see if I can fit LM wire-cutters in the Xiaomi. That would be nice.
The main benefit when compared to the Storm, however, would be the weight. The Xiaomi is lighter, and has a pocket-clip, so it will be easier to edc. Sure, you lose a couple of stuff, mainly the bits, but then again, I have carried other MTs that do not have bits.From what I can see in the videos of the Xiaomi, fit and finish seems decent. I think better than the original Flagship. Plus a glass-breaker and replaceable wire-cutters which I'd like to test. Cord cutter, whatever. Could have been a nice reamer.
It is definitely interesting, though. Another MT with the massive scissors.

If we're bringing up a Rebar, I will point out the Rebar can be had for NexTool prices sometimes in used condition.

J/K. You know I like my C & C tools. I've got dozens of them

The phillips on the end of a non-locking strap cutter irks me, but who knows, it could have sak-level spring retention and be usable. If you like yours, I'll probably buy one.

My last C & C was that huge Kilimanjaro Magnus. The NexTool should be better than that, so the bar isn't all that high right now.

-
A rock is a better multi-tool than the Magnus.

-
The openers and cord cutter seem to have good retention, but the cord-cutter seems too thin to have a Phillips on its tip. Not to mention it does not lock, and is bladed, so, not the best implement I've seen.
There are three short implements there. Have a claw opener, like Leatherman, to cover the openers, and then, in the two remaining slots, have a nice, thick, square shank Phillips, so that you can fit the Ganzo adapter and get more use out of the tool. Retention seems adequate, the cord cutter is not really needed on a tool that has a one-handed blade.
I am pretty sure I'll get it. Lots of reviews on it, mostly Russian, but the handles seem smooth, and everything works on it. As for Leatherman wire-cutters fitting in there, I guess I'll have to test that out myself. Even if they do not fit, I imaging they'll start selling replacements separately. If so, I'll probably get a set. And they might even fit my LM tools. Fingers crossed.
-
@Dutch_Tooler said:
Hmmm... reminds me of the swap trick I had to do on my Roxon to bring the can opener towards the edge of the handle. Earlier models had that problem. Copycats >:DYup, just like I feared. Looks like I'll have to swap the can opener position again, like in the Storm.

Can opener could not hook on the can when used right-handed. It is too deep in the handle. Left-handed it works.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
