What did you just get?
-
Thanks for the info, SirVic.

I like the look of the spring arm on Wenger scissors aesthetically. Nice to know they perform as well. :)
I've been through 8 springs on my Explorer scissors, so the spring arm may be a viable option for scissors for me. Though, after carrying the same Explorer for nearly 15 years, it would be hard to swap. :ahhh
-
Yeah i can understand that. I like the Explorer too, wonder why i did not carry it for a while

I have no experience yet how long the spring arm on Wengers last, maybe more experienced users can chime in here
8 springs in 15 years, so a new one every 1.875 years. Could be ok depending on your usage scenarios :D -
@SirVicaLot said:
Yeah i can understand that. I like the Explorer too, wonder why i did not carry it for a while
I have no experience yet how long the spring arm on Wengers last, maybe more experienced users can chime in here
8 springs in 15 years, so a new one every 1.875 years. Could be ok depending on your usage scenarios :DI'd like to know about the Wenger scissors spring life too.

The Explorer scissors have so much usage on them, thay I've ground the bottom of the handle down so the blades still bypass. They've been sharpened quite a few times and are smaller as a result. Still work like new and I love that the springs are cheap and easy to put in(and probably everyone else loves that too). 91mm Vic scissor geometry is nearly perfect. IMO of course. :)
And that Explorer ain't exploring anything if it isn't in your pocket.
:D
Though I can't say anything, I've got two backup Explorers ready to go when the time comes. :-[ -
Should have known that :DAnd you are right. The Explorer needs more pocket time
Guess i just carry it today. -
Recently got a USA made PowerAssist EOD and early transitional PowerAssist. Both shown with the later China made PowerAssist on right. :)





-
Nice selection GLBM didn’t you have those yet

-
Nice set GLBM.

Apart from the change in font/logo position, any noticeable quality difference across them?
-
Thank you, W!

I had a good swath of PowerLocks, but not PowerAssists. Up until last week, the one on the far right was the only one. :ahhh@Max Stone said:
Nice set GLBM.
Apart from the change in font/logo position, any noticeable quality difference across them?
Thank you, Max!

Indeed there is. The one with the hex head screws is very well made and the locks, deployment, and fit & finish are much tighter.
The transitional one is nearly identical in the same respects, but with very slightly poorer tool lockup for the stowed handle implements. The later one is very nice, but tool lockup is sloppy, fit & finish are slightly poorer than the transitional, and the external blades don't fire open as smoothly as the other two. -
Thanks GLBM. I’ll check later what version model I have.

-
@Max Stone said:
Thanks GLBM. I’ll check later what version model I have.
Looking forward to that.

The PowerAccess, in my opinion, is an underrated tool. SOG made a big mistake not developing a smaller version of it, and in turn developed junk like the PowerDuo and PowerPlay(junk relative the PowerAccess/Lock lineage). -
Seems I have one like your middle picture with the hex nuts. Quality is on par with my modern LMs. Just think the tools are not proportional to the overall size because of the gearing, when compared to my ST300 and Wave. Still a good tool, if a bit of a fiddler.


-
@Max Stone said:
Seems I have one like your middle picture with the hex nuts. Quality is on par with my modern LMs. Just think the tools are not proportional to the overall size because of the gearing, when compared to my ST300 and Wave. Still a good tool, if a bit of a fiddler.
Very nice, Max!

That is one of the transitional versions I believe. The only two variations I know of are, one with mild serrations, and one with aggressive serrations on the SE blade.
IMO, hands down, the best pair of NN pliers on any MT. But, as you say, the toolset is a bit short. Guess the PowerAssist is an ideal tool for someone who needs assisted blades and crazy good NN pliers.
First time I saw someone use a PowerLock/Assist was when the cable guy came to my house and I asked him if he needed pliers(he was fiddling with a splitter I had installed and knew he wasn't going to unscrew those coax ends without a tool), and he pulled out a nearly 20yo PowerLock and flipped it around. Started looking for a SOG afterwards and eventually saw a NIP PowerPlier V.3 at the store I work at. The SOG obsession may have escalated from there.
Sorry for the rambling. :ahhh
-
Good info GLBM.

For me, the SOG PPP is a winner. As compact as a PST for EDC but better pliers and stronger frame. Sadly, almost no SOG representation in my country. :(
BTW, never got a notice for your shipment. Now too long, so have to consider possibility of lost in transit. :(

-
@Max Stone said:
Good info GLBM.
For me, the SOG PPP is a winner. As compact as a PST for EDC but better pliers and stronger frame. Sadly, almost no SOG representation in my country. :(
BTW, never got a notice for your shipment. Now too long, so have to consider possibility of lost in transit. :(
Thanks for the update, Max. Yeah, I think we can call it a loss. Oh well. First time it has happened in the last dozen or so MTs I've sent to members. Maybe someone at the post office decided to examine the package and then decided to have the Multi-Plier examine their pocket.

Very true on the PPP. One of the best pocket tools indeed. I like the Paladin PT-510 frame with the gear guards, but with the PPP Deluxe toolset and pliers installed. May try to make one of those at some point. :)
-
I buyed this last week and now it arrived at last, orginal SwissTool

Only Tools Matters
-
Nice one Antti

-
Congrats. The Swisstool has been a favorite of mine for a while. I had a few of them but settled on the standard version. Its a big one but disciplined in my hand.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login