Leatherman Free P2/P4 Club and Feedback Thread
-
Using work gloves.
-
Great videos GLBM

-
Thanks for the vids, glbm

-
Hey all, been lurking for a little while now, but decided to post. Ordered a p4 on launch day so have had it for about a week and a half or so. One thing I've found annoying and haven't seen mentioned yet, is I find my scissors usually popping out when I'm deploying the Philips or pry driver, the scissors literally take hardly any force at all to pop up, they also tend to pop up when engaging the handles to open the pliers. Is your guy's magnetic connection the same weakness for the scissors?? I can barely feel it get magnetized at the very bottom of closing. Pretty annoying.
On a more positive note I had contacted Leatherman about when the pocket clip will be available and the response was:
"The FREE Series P4 is compatible with the pocket clip and will be available very soon for purchase on the website. The Clip Kit will be $9.00 plus tax (where applicable) and shipping/handling and will include the clip, a wrench to install the clip and 2 screws to attach the clip."
So I followed up saying I heard that customers who purchased direct from the Leatherman site would be sent a clip for free and this was the response:
"I have placed the order for the clip, you should see it very soon."
So I guess we'll see if it actually shows up!
-
There is something very wrong with your P4, if the scissors are moving with the drivers, nwoody. I'd send them back immediately. The issue would be a defective or damaged barrel pin spinning with the drivers. It won't be, because the tangs are rubbing together, since the spring system separates the tangs of the drivers and long tools. My P4 and P2 have no movement on the long tools when opening the small ones. Nobody else has reported anything like that happening that I know of. Hopefully it is just a minor oversight in QC. Maybe try putting some thin oil in that pivot and see if that helps, but I am betting on a damaged barrel pin.
Welcome to MT.o, by the way!

Oh, and thank you for the clip info!

-
Thank you, W!

Hope it can help anyone who may be confused with the drastically different deployment system. :)
You're welcome, Poncho!

I was surprised at how well it worked with gloves on. The OHT is the only other LM that works well with gloves, that I know of anyway. :)
-
Thanks! I should have worded that better. What I mean is that if my thumb isn't centered just right over the Philips and pry drivers, if it's slightly too far left, then the scissors will deploy with the Philips and pry when pressing the tangs. It just seems like they deploy too easily. Or maybe my thumb is fatter than I thought. How much force is required for your scissors to deploy? And can you get the scissors to deploy easily by pressing on the tang instead of the side cut out?
Here's a video to show what I am talking about:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@nwoody said:
Thanks! I should have worded that better. What I mean is that if my thumb isn't centered just right over the Philips and pry drivers, if it's slightly too far left, then the scissors will deploy with the Philips and pry when pressing the tangs. It just seems like they deploy too easily. Or maybe my thumb is fatter than I thought. How much force is required for your scissors to deploy? And can you get the scissors to deploy easily by pressing on the tang instead of the side cut out?Well, there is an issue, since the scissors and blade are under spring retention while the phillips doesn't engage the lock spring until the driver tips are about 3/4" away from the handles.
I'll try and take a video in a minute. :) -
Don't know if this will help, but here is a demo of the usage. I cannot even get the scissors move out by pushing the tang. Only the tools open when I push. I have fat thumbs.
Video of the lock spring system. -
Wow that for sure helps! Something definitely wrong with mine haha. My scissors literally have no spring tension until the same point that the phillips and pry driver do. Check the video I added to my previous post. I was wondering why no one had complained about this yet.. I thought it might be normal operation!
Here's a better video showing the lack of spring retention:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Nice to see some usage and more thoughts
I haven’t used mine much, but that’s normal for me. My scissors do take some effort to deploy though, so no looseness on mine. The bottle opener works well though, better than any other MT opener I’ve used. -
@nwoody said:
Wow that for sure helps! Something definitely wrong with mine haha. My scissors literally have no spring tension until the same point that the phillips and pry driver do. Check the video I added to my previous post. I was wondering why no one had complained about this yet.. I thought it might be normal operation!Here's a better video showing the lack of spring retention:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
That videos answer it well. Thanks for posting them. The tool needs to go back in my opinion. I would be pretty disappointed if mine had that issue. Perhaps a first run problem that was fixed fairly quickly? But, the example you bought, was part of the bad batch. :think:
-
@Monrogue said:
Nice to see some usage and more thoughts
I haven’t used mine much, but that’s normal for me. My scissors do take some effort to deploy though, so no looseness on mine. The bottle opener works well though, better than any other MT opener I’ve used.Nice.

The phillips bottle opener is very beefy and does look like it would work well. :) -
@gerleatherberman said:
That videos answer it well. Thanks for posting them. The tool needs to go back in my opinion. I would be pretty disappointed if mine had that issue. Perhaps a first run problem that was fixed fairly quickly? But, the example you bought, was part of the bad batch.
Yeah it is pretty disappointing, especially since I was excited and ordered around 7 am on launch day and when I kept reading other comments about the great QC and then here mine is haha. The more I look at it, I can now see that the scissors have about the same grind angle for the spring retention as the philips and pry bar do, hence why it opens the same amount until touches the spring. I was totally oblivious that it had such a major issue, the other 3 blades operate normally. So thanks for helping me realize that! I'll send it in for a warranty claim tomorrow morning or Monday and begin the waiting game...again.
-
You're certainly welcome, nwoody.

First confirmed QC issue so far: Tang grind incorrect on scissors and partially engages with adjacent drivers.
-
Any side handle flex when using screwdriver in L-position? Especially in the pliers fasteners place.

-
@Vadim said:
Any side handle flex when using screwdriver in L-position? Especially in the pliers fasteners place.I'll check today, but keep in mind, MTs with all-outboard tools(Free, Spirit, Bear Jaws, etc) are far more susceptible to handle torsion. Specifically why they say not to use them that way.

But, we'll see how it does. I betcha it won't t-handle like a Wave/Surge(added channelling for outboard blades over inboard tools makes it easy).
-
Just catching up. Great videos. Bummer nwoody got one that good to go. Its gonna happen sadly but lets hope this realy is a very random situation. I wont jump to conclusions myself.
Welcome nwoody
. Thanks for posting your tools issue. I do hope LM gets you sorted VERY fast and checks outgoing tools for any possible scissor issues for all tools heading out. -
@gerleatherberman said:
I'll check today, but keep in mind, MTs with all-outboard tools(Free, Spirit, Bear Jaws, etc) are far more susceptible to handle torsion. Specifically why they say not to use them that way.
But, we'll see how it does. I betcha it won't t-handle like a Wave/Surge(added channelling for outboard blades over inboard tools makes it easy).
Thanks GLBM!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login