Leatherman Free P2/P4 Club and Feedback Thread
-
@gerleatherberman said:
That videos answer it well. Thanks for posting them. The tool needs to go back in my opinion. I would be pretty disappointed if mine had that issue. Perhaps a first run problem that was fixed fairly quickly? But, the example you bought, was part of the bad batch.
Yeah it is pretty disappointing, especially since I was excited and ordered around 7 am on launch day and when I kept reading other comments about the great QC and then here mine is haha. The more I look at it, I can now see that the scissors have about the same grind angle for the spring retention as the philips and pry bar do, hence why it opens the same amount until touches the spring. I was totally oblivious that it had such a major issue, the other 3 blades operate normally. So thanks for helping me realize that! I'll send it in for a warranty claim tomorrow morning or Monday and begin the waiting game...again.
-
You're certainly welcome, nwoody.

First confirmed QC issue so far: Tang grind incorrect on scissors and partially engages with adjacent drivers.
-
Any side handle flex when using screwdriver in L-position? Especially in the pliers fasteners place.

-
@Vadim said:
Any side handle flex when using screwdriver in L-position? Especially in the pliers fasteners place.I'll check today, but keep in mind, MTs with all-outboard tools(Free, Spirit, Bear Jaws, etc) are far more susceptible to handle torsion. Specifically why they say not to use them that way.

But, we'll see how it does. I betcha it won't t-handle like a Wave/Surge(added channelling for outboard blades over inboard tools makes it easy).
-
Just catching up. Great videos. Bummer nwoody got one that good to go. Its gonna happen sadly but lets hope this realy is a very random situation. I wont jump to conclusions myself.
Welcome nwoody
. Thanks for posting your tools issue. I do hope LM gets you sorted VERY fast and checks outgoing tools for any possible scissor issues for all tools heading out. -
@gerleatherberman said:
I'll check today, but keep in mind, MTs with all-outboard tools(Free, Spirit, Bear Jaws, etc) are far more susceptible to handle torsion. Specifically why they say not to use them that way.
But, we'll see how it does. I betcha it won't t-handle like a Wave/Surge(added channelling for outboard blades over inboard tools makes it easy).
Thanks GLBM!
-
Some display cabinet lock work.
Note: imgur put photos out of order.




-
I'm glad that file looks aggressive.
-
Nice work GLBM do you think the file is strong enough
to be a screwdriver as normally they are quite brittle
-
@Wspeed said:
Nice work GLBM do you think the file is strong enough
to be a screwdriver as normally they are quite brittle
True. I modulate the driver usage on file tips. The machine screws I tightened weren't high torque. The phillips driver wouldn't turn inside the recess. Same problem with the Wave/Surge bits. The file/driver turned in the recess though. :)
@powernoodle said:
I'm glad that file looks aggressive.Indeed. The only reason I would call ot a file. The cut of the file works well. Kind of like a Rebar file cut or Spirit file cut.
On the plus side, I am not worried about snapping off the file, because of the profile. -
@gerleatherberman said:
You're certainly welcome, nwoody.
First confirmed QC issue so far: Tang grind incorrect on scissors and partially engages with adjacent drivers.
There's a pretty bad one in the amazon reviews, guy posted a video. Aside from that just see people on youtube complaining about some hot spots, tools popping out and price, but there are a lot more positives then negatives

-
The guys talking
@Blackbeard said:
There's a pretty bad one in the amazon reviews, guy posted a video. Aside from that just see people on youtube complaining about some hot spots, tools popping out and price, but there are a lot more positives then negatives
My feelings are good about it, but I did have a lengthy list of complaints. Like any new MT design, it takes some adjustment time. The list has shortened a bit with using the P4 with my EDC. The break-in period resulted in the magnets actually pulling the drivers back in if they play peekaboo, which is good. And learning to use the handle profile has made it quite comfortable to use.
People complaining about the price is fine(US labor and new-tool R&D aren't cheap), but some of those guys have $150 Benchmade and Spyderco folding knives. Do they even realize how much more involved an MT is to produce than a folding knife?
-
@gerleatherberman said:
The guys talking My feelings are good about it, but I did have a lengthy list of complaints. Like any new MT design, it takes some adjustment time. The list has shortened a bit with using the P4 with my EDC. The break-in period resulted in the magnets actually pulling the drivers back in if they play peekaboo, which is good. And learning to use the handle profile has made it quite comfortable to use.
People complaining about the price is fine(US labor and new-tool R&D aren't cheap), but some of those guys have $150 Benchmade and Spyderco folding knives. Do they even realize how much more involved an MT is to produce than a folding knife?
Thanks for the thorough review and testing
Glad it's working out for you.
The guy on amazon with the P4 review/vid seems to have a poor copy, it almost looks like it exploded at the plier mount lol, But it's probably a rare case. The crybabies complaining about the high price? They knew it was expensive so why moan & groan...The Steel on those knives you mention are much higher quality than LM's but I always think they are too pricey as well. -
@Blackbeard said:
Thanks for the thorough review and testing
Glad it's working out for you.
The guy on amazon with the P4 review/vid seems to have a poor copy, it almost looks like it exploded at the plier mount lol, But it's probably a rare case. The crybabies complaining about the high price? They knew it was expensive so why moan & groan...The Steel on those knives you mention are much higher quality than LM's but I always think they are too pricey as well.
Edit: Removed text. Reading back, it looks like I was rambling. Apologies for the rambling.

-
@Aloha said:
Welcome nwoody
. Thanks for posting your tools issue. I do hope LM gets you sorted VERY fast and checks outgoing tools for any possible scissor issues for all tools heading out.Thanks Aloha! I'm sure they will..well hoping anyways. I mean just look at what came in the mail today...for FREE:).. now that's some customer service. Too bad I need to send back my p4 for warranty claim. It's like a giant tease haha.


-
Very nice, nwoody! And good service, LM!

That pocket clip is a great piece of kit by itself. I can think of 20 tools I'd like to tap some threads in and install that clip.
But, for starters, Spirit, PocketPowerPlier, PowerLock, MP600, MP400, etc.....
-
Was chatting with a friend online and was tasked to justify a statement I made. The statement I made that I felt the fit & finish of the Free P2/P4 was a bit better than the Spirit's(a statement that several members here called me out on). So, it isn't THAT big of a difference in fit & finish, but maybe these photos can explain why I feel the way I do about it. I really like all of these multitools, so please don't get me wrong. These five tools are all top-tier in my opinion. But, all in all, I don't think fit & finish is a good single measure of how good a tool is in the real world. Only time can tell that. :)
Let me know if my eyes are messed up or something. Maybe I'm seeing these incorrectly, as far as the fit & finish are concerned. I won't point anything out yet, so not to instill any notions. :ahhh






-
For the very first time, I am actually going lean towards the spirit. While I do not use a spirit due to the way they design their wire cutter. It's just not suitable for me. But the feel and ergo of using it is very smooth. There's nothing that poke back at my palm. Be it using the pliers or the inboard tool. Everything is just smooth. It a very classic looker for sure. For work, I mainly use a LM or Gerber. Their tools and pliers just works for me. LM is a true workhorse, designed with functionality in mind. But their finishing were never quite the best. Be it a wave, charge or Free series, there are always some edges or parts that are not properly smoothed out. Leaving users to rectify themself. So, my very personal opinion and experience, Vic finishing are top notch. LM, works beautifully but hurts, sometimes. Very very own opinion. Not intended to offend either camps.
-
@Sam Lim said:
For the very first time, I am actually going lean towards the spirit. While I do not use a spirit due to the way they design their wire cutter. It's just not suitable for me. But the feel and ergo of using it is very smooth. There's nothing that poke back at my palm. Be it using the pliers or the inboard tool. Everything is just smooth. It a very classic looker for sure. For work, I mainly use a LM or Gerber. Their tools and pliers just works for me. LM is a true workhorse, designed with functionality in mind. But their finishing were never quite the best. Be it a wave, charge or Free series, there are always some edges or parts that are not properly smoothed out. Leaving users to rectify themself. So, my very personal opinion and experience, Vic finishing are top notch. LM, works beautifully but hurts, sometimes. Very very own opinion. Not intended to offend either camps.I’d have to agree about the ergonomics. Neither the Swisstool nor the Spirit poke my hands like the Leatherman Free. Even the Wave doesn’t feel as good when you use the pliers. The Free is particularly aggravating with the tabs on the locks though.
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login