Leatherman Free P2/P4 Club and Feedback Thread
-
Look what
SantaUPS brought...First brief impression is very nice and flickable, nicely loose pliers and good external tool extraction. Inner tools somewhat stiffer. Reminds a bit of an OHO Spirit.
No date stamps in the handles, dispatched by BladeHQ on the 3rd of May. Maybe they're still working on their first-prod batch.
Dilemma, nay, quandary... user or collection? I don't actually collect as such...

-
Nice one D_T

I would use it :D -
@Dutch_Tooler said:
Dilemma, nay, quandary... user or collection? I don't actually collect as such...Use, because that's what (multi)tools are for.

-
Yeah, leaning that way anyway and I personally have little use for shelf queens - YMMV. I'm also not about to buy another one just for the sake of collecting, although I can see the appeal that collecting per se might have for others... but I digress.
Surely, the idea of a P series challenge will have come up. When will we be able to earn the badge?

-
@NetsNJ said:
Wow nwoody that is amazing service,Leatherman gets too much crap from people, I am consistently impressed with them.
I will send them an e-mail tomorrow when I get home from work asking the same question, let's see what will happen.
If Leatherman U. S. A. is going to handle it for me by sending me the pocketclip themselves it will probably be okay.
If, on the other hand, they redirect me to the Belgian Leatherman site I'm basically scr*wed...
I'm still waiting for their response to my previous e-mail, in which I asked them if they knew when the new Free P4 tool would be available in Belgium, and what the retail price would be... ::)
-
P4 comes with pocket clip included :tu:
Retired Products
Travel down memory lane and look up your past favorite Leatherman multi-tools, knives and pocket tools. These tools may have taken a bow, but innovation hasn’t stopped. Discover our best-selling multi-tools, everyday carry essentials, and outdoor companions—crafted to perform wherever life takes you.
Leatherman (www.leatherman.com)
-
That is good news, just too late for me, unfortunately. I'll get one when they sell as accessory.
A little bit of handling revealed an interesting fact, namely the slight asymmetry in the position of the dividing walls between the tools on one side and not on the other. Probably important for those who want to mod the tool. Although using existing implements from other tools might be difficult due to what looks like a very unusual pivot/tang profile...




-
Congrats, D_T!

I'm in for a challenge at some point.

Good luck on the clip acquisitions, D_T and T-G! :ahhh
-
Thanks! Will report once I get hold of the clip.
-
Hi All,
I kind of follow this topic since the tool is out and agree but also disagree with some comments. Anyway I could not hold myself back longer and managed to put my itching hand on a P4.

First impression is as others said it’s a good tool. But definitely didn’t worth the asking price, not in the UK anyway.
I’m missing the changeable bits, the file looks short but quite aggressive even feeling it with my hand. The most useless tool on it the ruler. My model has a bit of a stiff pliers jaws pivot. Not sure if that’s the same with others I hope it would brake in soon. Time would tell how can this serve as an edc I guess. -
My first P4 pliers were perfect, but the second one has tight pliers. Sometimes, with LM pliers, crushing some stuff behind the pivot(what the crimper is) will expedite the loosening. I go back and forth crushing stuff in the jaws and crushing stuff in the crimper. After quite a few cycles, they even out. If that doesn't do the trick, then time/usage for breaking in will be the only way. My Surge took months to break in. :ahhh
But, that said, better tight then loosen, than loose then sloppy.
-
@gerleatherberman said:
Congrats, D_T!
I'm in for a challenge at some point.

Good luck on the clip acquisitions, D_T and T-G! :ahhh
I've just e-mailed Leatherman U.S.A. to ask when/where I could find these pocket clips in Belgium (and I also added that my P4 didn't come with a sticker of the new Logo, as seen here and on some youtube unboxing videos).
I'll keep you guys posted when I get an answer ;).
-
I emailed info at leatherman today, with my order number. They replied a few hours later saying their will ship me a belt clip.
-
@ZapWizard said:
I emailed info at leatherman today, with my order number. They replied a few hours later saying their will ship me a belt clip.But you guys ordered directly from Leatherman U.S.A. right ?
I ordered mine at a Belgian outdoor store (official Leatherman dealer, probably the most important dealer in Belgium and also the store that Tim Leatherman himself visited back in 2016 to do some engraving and meet and greet session).
I added a printscreen from my order history from this store, showing how I ordered a P4 on the 26th of April, maybe that will do.
Anyway, I would already be happy if these pocket clips were available for sale over here.
-
Returning my P2,
The little retaining tab inside broke off.
Not sure how the hell that happens!

Sent from my iPhone using Tapatalk
-
@Wpgwave said:
The little retaining tab inside broke off.
Not sure how the hell that happens!

That little double bend in the sheet metal might be a weak point. Especially if they formed the tab using two sheet metal operations and not a single pressing. Just the same as bending a paperclip back and forth.
My CAD model isn't perfectly accurate, but it looks like they put the first bend in to move the around the can opener. Than they put in a second bend to match the angle on the pliers.
If you close the tool with the pliers open, these little tabs close them for you, but it should not be enough force to break that tab, unless it was already cracked. -
Sounds like a plausible failure mode Zap...
Sorry that happened Wpgwave, hope it gets replaced soon!
-
You can see a line in the center of the broken half, it looks like it may have been cracked.
Sent from my iPad using Tapatalk
-

That little double bend in the sheet metal might be a weak point.** Especially if they formed the tab using two sheet metal operations and not a single pressing.** Just the same as bending a paperclip back and forth.
My CAD model isn't perfectly accurate, but it looks like they put the first bend in to move the around the can opener. Than they put in a second bend to match the angle on the pliers.
If you close the tool with the pliers open, these little tabs close them for you, but it should not be enough force to break that tab, unless it was already cracked.Agreed! I reckon it'll be coined in one hit, but that's still a fair bit of metal strain for a short return bend like that. When I was working in the drawing office with hydraulic folding machines, the golden rule for folding was 8x material thickness for the length of each bend . I never worked with press brakes though, so I don't know their true limitations before there's a risk of a tear.

@Wpgwave said:
You can see a line in the center of the broken half, it looks like it may have been cracked.Sent from my iPad using Tapatalk
Exactly what I thought

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
