Charge Owners club !
-
Welcome. The TTi summary is very well said. I've often said if you are looking at the Wave/Charge series the Wave is the best bang for the buck. For those with a thing for Titanium or who want higher end blade steel then....... I've got the TTi and Ti and both are users. I preferred the Ti as the pliers were not cap crimpers. In use for me the CC are not a problem so the TTi became my go to work tool. I don't recall what I paid for my Ti but the TTi was darn near a steal. I posted the story of how it got it. It was cruddy and looked a mess. I think the seller thought it was done for. It cleaned up beautifully and has been flawless in use.
-
Got my TTI in used condition too.
Mine is the older gen and I do believe those scales are made from one piece each. -
The outer scales are one piece, but there’s an additional inner layer (liner) for the ruler that the Wave does not have. Maybe different on the older gen?

-
Nice one, Steve 8)

Mine today


-
Is it just the newest TTis that have the phosphor bronze washers between the Ti scales & blades and between the blades & steel frame?
All of my TTis(2017 and older) have a spacer formed on the inside of the scales instead of the washers. I'll take some pics tomorrow. But, that said, I like the idea of phosphor bronze washers on each side of the blade pivots, hypothetically anyway. I know my Charge+ and AL have PB washers on each side, but I am not sure if I really notice a difference. But, perhaps someone with some metallurgy knowledge could chime in.Any help would be much appreciated. :)
-
@gerleatherberman said:
Is it just the newest TTis that have the phosphor bronze washers between the Ti scales & blades and between the blades & steel frame?
All of my TTis(2017 and older) have a spacer formed on the inside of the scales instead of the washers. I'll take some pics tomorrow. But, that said, I like the idea of phosphor bronze washers on each side of the blade pivots, hypothetically anyway. I know my Charge+ and AL have PB washers on each side, but I am not sure if I really notice a difference. But, perhaps someone with some metallurgy knowledge could chime in.Any help would be much appreciated. :)
Posted this pic earlier on my TTI. Not sure of the age of this model, probably 2018 as a guess.
I know that the threads of screwed watch backs of Ti watches can ‘bind’ and lock up, so this is maybe a friction-reducing measure, as much as a spacer requirement. Ti is highly corrosion resistant and has no bi-metallic corrosion risk like you can sometimes get when two different metals are in direct contact.

-
Thanks glbm
and my Charge+ the Al model, open very well with all the outside tools
So the washers may make a difference 
-
@Max Stone said:
Posted this pic earlier on my TTI. Not sure of the age of this model, probably 2018 as a guess.I know that the threads of screwed watch backs of Ti watches can ‘bind’ and lock up, so this is maybe a friction-reducing measure, as much as a spacer requirement. Ti is highly corrosion resistant and has no bi-metallic corrosion risk like you can sometimes get when two different metals are in direct contact.
Awesome. Thanks for the info and insights, Max!

I'll be needing to add a new Charge TTi to the collection.
@Poncho65 said:
Thanks glbm
and my Charge+ the Al model, open very well with all the outside tools
So the washers may make a difference 
Thanks for the insight, Poncho!

-
My 04 Ti has the phosphor washers. I can darn near flick the main blade out.
-
Great pic, Vadim

-
Thanks glbm

-
This has been a consistent, relatively reliable and capable edc kit for many years ...
HF's LM CTTi 120514

MULTITOOL: Leatherman Charge TTi- LM Nylon sheath
- LM Bit driver extension
- LM Bit kit - most useful bit selection in LM carrier
Ferrocerium rod (Exotac NanoStriker rod)
Awl (ex SAK 91mm) - Modded with Devcon Epoxy for bit driver fit
Tweezers (ex SAK 91mm)
Hair Pin - respectfully in memory of Angus MacGyver
Pocketwrench II
PEN: Fisher bullet space pen + clip

-
Great EDC HF.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



