The Hacked Leatherman Owners Club.
-
Average Joe will never have to take one apart
that's why they are put together with those knurled screws inthe first place ;) Military has different requirements as well as do preppers, I can take apart a ST300 without the Loki wrenches once the loctite has been broken free and sometimes with it still intact ( 2 pliers or 2 vise grips or a combination of both work fine as long as you are careful) A prepper or military person will likely have both of those handy whereas they are less likely to have the star bits with them because they are more specialty orientated tools
just my 2 cents 
-
@Poncho65 said:
Average Joe will never have to take one apart
that's why they are put together with those knurled screws inthe first place ;) Military has different requirements as well as do preppers, I can take apart a ST300 without the Loki wrenches once the loctite has been broken free and sometimes with it still intact ( 2 pliers or 2 vise grips or a combination of both work fine as long as you are careful) A prepper or military person will likely have both of those handy whereas they are less likely to have the star bits with them because they are more specialty orientated tools
just my 2 cents 
Wow, actually u make a great point about that. Also I wonder how easy it would be to replace a pivot with a standard hex bolt in a pinch.
-
I have seen several members over the years on here replace them with hex bolts or other fasteners (including barrel screws) that they preferred or had already messed the knurled screws up trying to take whatever MT they wanted to work on apart

-
@Dutch_Tooler said:
Was this you zoid? Sounds intensely interesting...
Yeah it was, like five years ago.
-
So I was remembering correctly
I love that mod
I remember
over this when I first came back 
-
Nice one zoidberg that looks really good

-
If i mounted an extra spacer to my Free P4.. Am i allowed to post here? :)
-
You’d be the first to mod a Free Raoul.

-
Would love to see some pics Raoul

-
@Dutch_Tooler said:
Do you still have (links to) more detailed pics by any chance?Edit: do I see a thumb tab on the scissors? Sorry, on the phone at the well-lit beach ;)
Not exactly no.
There are a few pics from back then but nothing that really shows any kind of detail.
Thumb tab yes, the scissors are from an old gen surge. -
Thanks zoid

I could imagine replicating that particular mod but my VX already has Wave scissors which, while inferior to Surge ones, will do the job in a pinch.
Meanwhile on a Florida resort balcony...
-
Who got a plus head and an awl?
I can live without the can opener and for stripping wires I can do it with the pliers.

-
Long story short:
Free P4 uses on the 4 subtool side this approach:
Spacer Saw Spring spacer 4xtool spacer Spring spacer Serrated B spacer
I have put a Wave spacer next to the Saw and it opens much smoother.
On the other side there is:
Spacer tools Spacer. And i shall mount at least 2 spacer next to the sprinhs so the main tools open smoother. I just jave to canibalize something.

-
to the first free modder -
Raoul, you get the prize!

-
Quick question. The extra width of the tool set, does it cause the locking tab to move side to side any? I was looking at mine this evening and think you'd need to swap the stock scale-spacer washers to slightly thinner ones to accommodate the extra thin spacers to the springs.

-
The lock tab does move side to side without the extra spacers.
I have used that real slim washer from a Wave, going to add 2 on the other side, it wont make any difference.
The thick spacer that sits on the scale, is there because the scale is stamped for ergonomics/looks etc, so the tool does not scrape the pressed part of the scale.
Definitely a thinner spacer can be mounted, yet not to thin so the main tool does not interfere with the pressed part of the scale -
Thanks, Raoul!

Definitely a good idea, since the tool stack does seem to "sway" a tiny bit. The extra washers would remove that and enhance the action, correct?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
