Showcase: Mods to plier-based multitools
-
Nice!
Sent fra min FRD-L09 via Tapatalk
-
Great work Darrell

-
wave + Rebar = near perfect internal tools.
got that mod done so fast I felt like doing one of the others on my list to the Spirit X
-
Just added an s30V blade to my wave, nearly complete overhaul for my wave.
-
Nice work HG

-
Final mod for a while, documented it and will make a new thread soon. Added the Rebar Philips by removing the small metal tab inside the frame. There is not a little more of a gap between the frame pieces when it is closed but not really noticeable.
Cheers
-
Tool Name: TSA Safe Squirt with a Blade
Basis: Leatherman Squirt PS4
Aim: Have a versatile pocket/key chain tool that I can get on an airplane without TSA taking it to sell on ebay. Specifically being able to have a blade that is easily removable/detachable
Mods:
Biggest mod was to replace the standard blade with a scalpel holder. Needed to file down the scales to accommodate this, however, it creates a nice notch that the outside of the blade holder can sit in.I also added a pair of tweezer by filing down the opposite scale at an angle similar to the tweezer holders on the Style. I also filed the inside of this scale down maybe a 32th of an inch to make it lie flat with the wider scissors that are also stored here.
The back is going to have house keys on it (just need to get them cut), will replace my Style which was previously my EDC.




-
@Trebor Redins said:
Tool Name: TSA Safe Squirt with a Blade
Basis: Leatherman Squirt PS4
Aim: Have a versatile pocket/key chain tool that I can get on an airplane without TSA taking it to sell on ebay. Specifically being able to have a blade that is easily removable/detachable
Mods:
Biggest mod was to replace the standard blade with a scalpel holder. Needed to file down the scales to accommodate this, however, it creates a nice notch that the outside of the blade holder can sit in.I also added a pair of tweezer by filing down the opposite scale at an angle similar to the tweezer holders on the Style. I also filed the inside of this scale down maybe a 32th of an inch to make it lie flat with the wider scissors that are also stored here.
The back is going to have house keys on it (just need to get them cut), will replace my Style which was previously my EDC.
That mod is completely amazing! Where did you get the Scalpel holder? I'd love to get more info on how you did this...did the tool have screw pivots to begin with or did you add them?
-
Here is my current EDC multi-tool:
Knifeless Rebar
Info on the mod can be seen in the mod forum.
Cheers,
H.G. -
Tool Name: Plusified pokey wave
Basis: new wave
Aim: kill my boredom, get the replaceable wire cutters and I have more user for an awl than the can opener to be honest.
Mods: wave plus pliers head and rebar awl.
Links: it isn't a very advanced mod so no links to the build.
It is quite the international tool. An American tool with an American company etching found in an Australian pawn shop with a Texan head and a Russian awl. Modded by a South American.


-
Hi,
Tool Name: Leatherman Style PS+
Basis: Leatherman Style PS
Aim: Rendering it more versatile
Mods: Removed nail file/screwdriver. Added blade and metal file.
I've lost screwdriver but i'm carrying a bits holder on my keychain. It's way better than Style screwdriver solution.
Links: /topic/81632
Hope you like it. -
That is a really sweet mod!
I have done so many recent mods to plier based tools I'll just link to my Pinterest page:
And here is the instagram:
Bonus picture which is also located in both:

-
Nice work HG

-
Poncho65 edit: Post a bit to political for MTO

-
We don't do politcal here and apprecaite to keep opinions of that nature to yourself on here

-
Could that Leatherman saw holder be modded into a CenterDrive, do you think?
Charles.
-
Speaking of modded Center Drives, here's mine. I replaced the serrated blade and awl with a u-shank holder from an MP600 Pro Scout. I also cut down one of the longer saw blades so that it fits in the CD. (they cut easily with a dremel and a cutoff wheel). I drilled and tapped holes and installed a titanium clip made for a Zero Tolerance knife. Finally, I made a custom lanyard using an old RCA connector I had lying around. I'm into hifi audio and I thought this was cool. It's attached with a quick-release so I can remove it when I use the CD as a screwdriver. (not really necessary, but if I'm screwing a lot then I'll remove it)
Charles.

-
@ChopperCharles said:
Could that Leatherman saw holder be modded into a CenterDrive, do you think?Charles.
It could however just off the top of my head:
the LM pivot is larger
to clear the lock mech the surrounds might require thinning or it will push upwards which leads to...
likely need to arrange tools in the opposite handle for clearance
and lastly even with the holder fitted adding a saw or file etc will probably make it too long to store in the handle -
@zoidberg said:
It could however just off the top of my head:the LM pivot is larger
to clear the lock mech the surrounds might require thinning or it will push upwards which leads to...
likely need to arrange tools in the opposite handle for clearance
and lastly even with the holder fitted adding a saw or file etc will probably make it too long to store in the handleYou misunderstand. I would replace the locking blade with the saw and make it a bladeless multi tool. The remgrit holder would go back in my pro scout.
Perhaps even a sawzall blade would fit that large pivot instead of the t shank.
Charles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login