The Hacked Leatherman Owners Club.
-
With the washers in place, doesn't that make the pivot post too short? Now the screw side's scale is not sitting in the pivot post but on screw itself doesn't that make it undersized and would the scales move sideways? I am just saying from what I think.. Didn't note on that when I unscrewed it the last time. I could be wrong.

-
@Sam Lim said:
With the washers in place, doesn't that make the pivot post too short? Now the screw side's scale is not sitting in the pivot post but on screw itself doesn't that make it undersized and would the scales move sideways? I am just saying from what I think.. Didn't note on that when I unscrewed it the last time. I could be wrong.
I would imagine that depends on the thickness of the washer and how tight you make the pivot. Still, since u already have it apart, might be worth trying both ways.
Raoul should get hacker badge just for doing this to a Free so fast.
-
Well, i dont quite understand you guys.
The sandwich of scales and tools is held toghether by the sexbolt. The screw of the sex bolt appears to me to be quite long, and the bolt's lenght is slightly shorter than the stack of tools and washers, it looks slightly burryed in the thick washer.
Looks to me that it was intentionally tought like this, in order to be able to adjust the ease of deployment.
Nothing, except the locktab, sways. And seems to me the locktab was not made to fit perfectly between the scales, tolerances possible... and again i'm thinking at the tightness adjustment. -
@Raoul Octav said:
Well, i dont quite understand you guys.
The sandwich of scales and tools is held toghether by the sexbolt. The screw of the sex bolt appears to me to be quite long, and the bolt's lenght is slightly shorter than the stack of tools and washers, it looks slightly burryed in the thick washer.
Looks to me that it was intentionally tought like this, in order to be able to adjust the ease of deployment.
Nothing, except the locktab, sways. And seems to me the locktab was not made to fit perfectly between the scales, tolerances possible... and again i'm thinking at the tightness adjustment.That's ok, I'm mostly just rambling.

So I've spent the morning really looking at the Leap as just a tool and can't believe I didn't see it for what it is before.. this tool is compact, light, has a blade exchanger that allows other tools to be slotted in whenever necessary, and looks to have standard size pliers (possibly interchangable with rebar/wave) all at $39.95 what the heck.
https://images.app.goo.gl/5T5PmVd5ijXLNv6Z8
Not just that, it has what looks to be a set of scissors that could be quite good. AND ALL TOOLS ARE ACCESSABLE ON THE OUTSIDE!
-
It is the same plier head as the Rev

-
I am not really sure
I don't know if I have ever seen anyone mod a Leap or a Rev ??? I would guess they are the same size pivot as the Wave/Rebar range but can't be 100% sure unless one was taken apart and tested :D -
@Happy Gilmore said:
That's ok, I'm mostly just rambling.
So I've spent the morning really looking at the Leap as just a tool and can't believe I didn't see it for what it is before.. this tool is compact, light, has a blade exchanger that allows other tools to be slotted in whenever necessary, and looks to have standard size pliers (possibly interchangable with rebar/wave) all at $39.95 what the heck.
https://images.app.goo.gl/5T5PmVd5ijXLNv6Z8
Not just that, it has what looks to be a set of scissors that could be quite good. AND ALL TOOLS ARE ACCESSABLE ON THE OUTSIDE!
If you are talking about the straight blade slot, once it is installed it can't be removed unless you dismantle it. I have not seen anyone that alleges to be able to take it off.
-
@Poncho65 said:
I am not really sure
I don't know if I have ever seen anyone mod a Leap or a Rev ??? I would guess they are the same size pivot as the Wave/Rebar range but can't be 100% sure unless one was taken apart and tested :DThe problem being the tube rivets on the plastic scales. How to drill them without overheating and damaging the scales.
-
@munecito said:
The problem being the tube rivets on the plastic scales. How to drill them without overheating and damaging the scales.I might not need to drill them initially if the plastic can rotate out of the way. If there is a mechanism inside that keeps the blade in I am very intrigued indeed
-
I received the one for my little girl and the blade was already in (bought second hand but unused ;) ) I took the blade out as well, as I recall I had to press against a plastic piece inside the handle whilst pushing it
been a couple years since I did this and I may be thinking wrong
:D -
@Sam Lim said:
I vaguely remember LM advertised it as one time installation.. I didn't remember them saying its not removable. Same way in, same way out.. That's it. :)Ha. All throughout my flight I was thinking of what you said and arrived to the hotel and stayed to tinker with it.
I managed to also take the blade off. Same thing as you but I did it before I read your post.
And there I was thinking I was some kind of wizard.
Anyway. Can confirm. Reverse the installation instructions while pressing really hard on the liner lock.
@Poncho65 said:
I received the one for my little girl and the blade was already in (bought second hand but unused ;) ) I took the blade out as well, as I recall I had to press against a plastic piece inside the handle whilst pushing it
been a couple years since I did this and I may be thinking wrong
:DYeah now everyone just come and remind me that I was some genius reverse engineering master

@Happy Gilmore said:
That's ok, I'm mostly just rambling.
So I've spent the morning really looking at the Leap as just a tool and can't believe I didn't see it for what it is before.. this tool is compact, light, has a blade exchanger that allows other tools** to be slotted in whenever necessary,** and looks to have standard size pliers (possibly interchangable with rebar/wave) all at $39.95 what the heck.
https://images.app.goo.gl/5T5PmVd5ijXLNv6Z8
Not just that, it has what looks to be a set of scissors that could be quite good. AND ALL TOOLS ARE ACCESSABLE ON THE OUTSIDE!
So it ended up being easy to remove. I did when I arrived to the hotel and when I came here to proudly show off. I found that Sam and Poncho had beaten me to it :(
-
No big deal if we beat you to it ;) I have done mods that I thought I came up with, later to be given a link of them being done more than a year before as well :D
-
Before I took the Core knife apart I wanted to get some pics and a video.
https://www.instagram.com/p/Bxarjtogv4y/?utm_source=ig_share_sheet&igshid=10tgtjo0v23md
Cheers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
so did I!