Leap Owner's Club
-
Leap with his friend, Charge :D

-

With its pocket clip
-

I know which color to go with next time I buy a Leap.
Great photo, comis!
@comis said:
Yikes, I should have wrote that I just don't know with longer handles, whether the handle itself will be a little more vulnerable than the metal counterpart. However, I just checked and compared it with my charge, and both handles do have some give when I start squeezing on them, and the Leap don't feel necessarily weaker than the Charge. So I could be wrong?
Cool.

With its pocket clip
Very nice setup!

-
Has anyone figured out how to remove the blade from these, out of curiosity?
-
@NetsNJ said:
Has anyone figured out how to remove the blade from these, out of curiosity?In the manual, there's instruction on how to put on the blade. Removing the blade, basically is the reversal of the process using the blade-holder. If necessary, you could even do it by hand, just hold firm and be careful not to cut yourself.
-
Okay - you guys win. I ordered a red one, through I might spray paint it yellow and black just to be different.
One vendor said these were discontinued, and they are no longer available at Wal-mart. None could be found on Amazon Prime. So I'm wondering what the future holds for the Leap.
-
@comis said:
In the manual, there's instruction on how to put on the blade. Removing the blade, basically is the reversal of the process using the blade-holder. If necessary, you could even do it by hand, just hold firm and be careful not to cut yourself.Yes, but has anyone done it? My understanding is that leatherman designed this to be a "one way" operation, and so was curious if anyone had uninstalled the blade without disassembling the tool.
-
I will look at both later tonight and see what can be done

-
Great write up HG

And yes a few of us have taken the blade out after installation
we talked about it a few days ago in the Hacked LM club I think

-
@NetsNJ said:
Yes, but has anyone done it? My understanding is that leatherman designed this to be a "one way" operation, and so was curious if anyone had uninstalled the blade without disassembling the tool.Yes, I spoke from experience, I'd disengage the blade twice, once with and once without the tool. Oh, btw, you also have to depress the liner lock to get the blade out(which you don't have to depress the liner lock when you are getting it in)
-
I have merged the two threads

-
Thanks Steve
I was waiting to be on a computer instead of a phone to look at them but glad you came along and did it 
-
@powernoodle said:
Okay - you guys win. I ordered a red one, through I might spray paint it yellow and black just to be different.One vendor said these were discontinued, and they are no longer available at Wal-mart. None could be found on Amazon Prime. So I'm wondering what the future holds for the Leap.
It still appears in the current lineup at Leatherman.com
404 Not Found
From our factory in Portland, Oregon, we are committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life.
Leatherman (www.leatherman.com)
Also. There is a proposed October challenge for leap owners. Join us!
-
@gerleatherberman said:

I know which color to go with next time I buy a Leap.
Great photo, comis!
Cool.
Very nice setup!

I like the green much better than the red. But my niece picked the green for her.
The blue is always out of stock so wet know which one is the best selling colour.
-
@comis said:
Yes, I spoke from experience, I'd disengage the blade twice, once with and once without the tool. Oh, btw, you also have to depress the liner lock to get the blade out(which you don't have to depress the liner lock when you are getting it in)D'oh! >:(
Of course. Yeah it slides right out when you press on the locking tab.
Feel pretty silly now.

Too bad the saw isn't also remove able. This would be such a great platform for swapping tools in and out. File, belt cutter, etc etc. Would be amazing for flying.
-
Of course. Yeah it slides right out when you press on the locking tab.
Feel pretty silly now.

Too bad the saw isn't also remove able. This would be such a great platform for swapping tools in and out. File, belt cutter, etc etc. Would be amazing for flying.
Funny you mention that...I actually think that it might be possible to do this based on the way the pivots are made. From what I can tell the cuts into the pivots extend all the way through the tool. which means it might be possible to use the blade as a template to make the saw removable. This is definitely something I am considering after I first modify a few other tools to slot into the blade slot. I really want everyone to see the potential of this platform. I used it all day today and it was incredible at wood working. I found it more comfortable than even my Charge/Blast Hybrid. I have more pictures and other info to update a little later on.
Also you only need one security Torx to adjust the tool. The screw is located on the Saw or Scissor side of the tool.
Cheers,
H.G.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login