THE Crunch Owners Thread
-
@Wspeed said:
Nasty I haven’t had a problem with the pin
But I wonder if you could still use the original pin
and use a centre punch to peen the pin in place
Hope someone else would be able to help you comis
Not recommended, u need the pin to be longer initially in order not to damage the frame I believe.
-
@Wspeed said:
Nasty I haven’t had a problem with the pin
But I wonder if you could still use the original pin
and use a centre punch to peen the pin in place
Hope someone else would be able to help you comis
That's a pretty good suggestion, I upload another photo for everyone's reference. I don't know whether there is enough material to hold it though.


-
@Happy Gilmore said:
Not recommended, u need the pin to be longer initially in order not to damage the frame I believe.You mean the center punch will push too much material and deform the frame? I think that's a valid concern, but aren't the original pin was held in place by this very same method?

-
That’s what it looks like they have done used a centre punch
But I don’t know if it will work or not trying it again
I can’t see why it would damage the frame but I am no expert
-
Carrying the PocketCrunch today


-
I would try to center punch method first and if that doesn't work then maybe a piece of pin stock would work
of course brass pin stock is a lot less stiff and may bend on you
I would try something definitely before the option of sending it in if it were me 
-
The Crunch arrived yesterday so I carried it today.

-
@Poncho65 said:
I would try to center punch method first and if that doesn't work then maybe a piece of pin stock would work
of course brass pin stock is a lot less stiff and may bend on you
I would try something definitely before the option of sending it in if it were me 
Thanks Poncho! I think I would do just that. Unless I drop the tool or use a toothpick to push it out, the pin is temporarily sitting in there alright. Worst case scenario, I would do a temp fix with brass pin while looking for nickel silver pin.
@Sos24 said:
The Crunch arrived yesterday so I carried it today.

Hope you like it! I always think this tool is one of the more unique tool out there, and a perfect companion to a SAK or even a Plier-based MT.
-
Nice one Sos would love to hear what you think of the Crunch

-
-
The PocketCrunch


-
Thanks Poncho

-
Nice pic Vadim

-
Very cool 8)

-
The Sheath Crunch :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


