Keysmart Pro and Alltul multitools
-
Thanks, i will check it out!

-
Do you think the Raptor could cut rebar binding wire? As I'm thinking it might just knock the Doohickey that's been on mine for a few years now off the keyring. My only problem is metric wrenches. Most everything on the farm is SAE, minus the UTV and ATV, both being from Japanese manufacturers yet assembled in the USA.
I will say this about their line of animal tools--compared to UST it seems they better balanced form and function, and as well made them of thicker stock; versus the thin stuff of the USTs.
-
I'm not sure about that. I've never tried cutting anything like that, but if you can give me an idea what other types of wire it may be similar to that I may have around here I'd be happy to give it a shot.
I haven't actually tried cutting anything at all with it yet.
I did however so some running around today, and the lack of bulky keys made me constantly think I'd forgotten or lost them.

Another thing to get used to. Also, I am thinking that a reorganization of keys inside the Pro may be required but I'll leave it as is for now to see if it really is needed, or if I just need to get used to something new.
Def
-
According to Lowe's; the wire we use is 16 gauge, or just over a millimeter thick.
-
I have some 16 gauge copper electrical wire that is probably too soft and some plant wire that is stiffer but probably a little thinner and lighter. I will try wrapping a few strands together and seeing if it will cut, and hopefully that will simulate what you have well enough?
Def
-
I pit the Raptor against the two types of wire I have handy- 16 gauge copper wire and some plant wire that is about 1mm thick with a rubber like coating on it making it a total of 2mm thick.


The Raptor did a better job of stripping the electrical wire than it did cutting it, and this was the result.

The wire got bunched in between both halves of the Raptor, separating the tool slightly. Not a great start, but then I don't expect it to replace my multitool, so there's still hope.

The smaller plant wire is a lot stiffer and the Raptor cut it easily. As the Raptor is not overly ergonomic it isn't something I would want to do all day long, but for cutting the odd wire or zip tie I think it is quite capable. In fact, I felt it went so well that I decided to twist the wire in half and see how well the Raptor handled two at a time.

The Raptor may have done it, but unfortunately the points of it dug into my hands enough that I wasn't going to continue.

It notched the wire pretty good, but I don't see me trying that again any time soon.
Def
-
You can do rubber/plastic headed keys in a Keysmart. You just need a bunch of extenders. I've been using mine like this for years, ditto my employees who loved the idea. Here are a couple of keysmart's with my keys at their bulkiest (it's about half that now),


-
That is pretty cool, but yeah, it does look pretty bulky. I am not sure that I would want to add that much size to it. I am really appreciating the relatively small form factor in it's current configuration.
I had an interesting experience yesterday that proved how neat the MagConnect was. As I was pulling my keys out of my pocket to unlock my door and come into the house I accidentally pulled a quarter out of my pocket, which then went between the deck boards. Fortunately it didn't go all the way down, and was caught by some old leaves. I couldn't reach it, but the magnet on the MagConnect could, and I managed to get it back.
However, this may have been the least it could do, as, when I pulled the MagConnect out to rescue the quarter I noticed another coin was stuck to the magnet, and the MegConnect may have been the reason the quarter was dropped in the first place.
Def
-
Interesting thread Boss... would be keen on what keysmart user experience is...
While looking at key organizers, the keysmart and keybar were my considerations... Finally decided on the Keybar as keys don’t stick out as much. Another reason, Keybars are offered in different types of materials and finishes to suit taste preferences... And they offered a lot of inserts to turn the organizers into a multitool... not to mention collaborations with Griffin and Klecker Knives...
I’m certain those griffin and Klecker tools could fit in the Keysmart but only seen minimal offerings from Keysmart (usb, bottle opener)... Those altools look like they can’t be integrated into the keysmart... and their latest offering is the pocket knives which also can’t be inserted into the keysmart...
Speaking of usb flash drives, Keysmart’s offering is kinda similar to those Kingston Data Traveller...
-
Would love to see what other tools owners have in their keysmart just to get some ideas... seen some with LM tools and sliver grippers...

Long term use, do the screws loosen over time?
-
Yes, I will admit to being confused as to why the Alltuls were not compatible with the KeySmart Pro. Maybe they didn't want to have all their eggs in one basket?

So far I have been getting on well enough with the Keysmart Pro, MagConnect and Raptor. I have noticed one thing, and I am not sure how to fix it.
Since the Raptor is a smaller carabiner than the Nite Ize one I had been using I find it is easier to disconnect it at the MagConnect rather than constantly hooking/unhooking it from my belt loop when I get in and out of the car. The problem is that the magnets on the MagConnect are so powerful that they keep sticking themselves to the S Biners and rings and so won't connect to eachother without me taking a moment to straighten it all out. Not a huge deal, but a bit annoying. I suppose the only solution to this is a weaker magnet, but who wants that?
Def
-
Yup, same experience I have with Keybar’s magnuts... not a big deal either... it even attracted some coins I forgot I had in my pockets...
-
Looks like Drop (formerly Massdrop) has the Keysmart Pro at a (presumably) good price ($45):
https://drop.com/buy/keysmart-pro-tile-smart-location-technology?utm_source=linkshare&referer=GVYAK5 -
Was browsing their site earlier, the rugged version looks kinda neat with the clip... just not a deep carry one...
-
Pared down to 3 keys, since retirement, so the KeySmart didn't excite me.
The AllTuls looked interesting. Problem is I'd want one of each.
-
I have been carrying and using the KeySmart Pro for some time now and I have to say that I am a complete convert to the KeySmart style key holders. In fact, I wanted to add some extra versatility to it by adding a USB drive. I found these two that I thought might work.

As I feared, the better of the two drives (more robust construction, larger 2TB capacity) wouldn't work. I thought about maybe filling the ring with epoxy and drilling a more usable sized hole to make it work, and I might do that eventually, but for now I figured I would try the thinner, key shaped 8 gig drive.

As you can see, it fits better, which really shouldn't be a surprise to anyone as it is shaped like a key, and therefore shouldn't be so surprising that it fits neatly into something designed to hold keys.


It's at this point that I am going to go off on a bit of a tangent, but bear with me....
I have often said that creating a good multitool is more art than anything else, which is why you really can't just get a bunch of SAK parts and bolt them into a pair of pliers and pretend you have something special. I can think of a few companies that have this mentality, and, when you try that mentality with something you end up with this:

Note that the keys stick out one side and the USB drive sticks out the other. Then look at how much empty space there is.

The efficient use of space is what sets some highly refined multitools apart from some of the obvious amateurs masquerading as brand names. Especially when, with a bit of effort and planning I can move things around it's relatively easy to find a configuration that uses the space so that things fit together nicely.
Original USB configuration:

Final configuration:

This doesn't affect function in any way, but decreases the overall width and allows all the keys to fit in nicely with the tool and USB drive.

And, the best part is, nothing sticks out!

When it comes to planning things, I am absolutely terrible, but even I can see that putting a little bit of thought and time into something can greatly improve the function with a negligible impact on convenience. :D
Score one for KeySmart- there have been few tools that have become this ingrained into my daily life, and I have used pretty much everything at one point or another.
Def
-
Glad to hear the Keysmart is working out for you. I very much like mine too. Space is a premium with the key holders. You can cram a bunch in but then what? Efficient use of that space with tools that are work well in that space is key. The add on by Klecker all look to be functional and work well within the Keysmart. My set up is near perfect so I've left it alone for now. Non of my screws have loosened even after several unintentional drops.
-
Just to update this a bit... I went to use the flashlight in my Keysmart Pro a week or two ago and it was dead as a doornail. Not a surprise really, as I had never charged it since the initial charge when I got it. It would be nice if it had given me some indicator that the battery was low prior to it being completely dead so that I could have charged it. If I had lost my keys when it was dead I'd have never found them again.
Also, now that I have some mileage on it, I am finding that the Keysmart Pro (with three keys and a flash drive) and my Jeep key seem to be at the absolute max weight for the magnetic connector doodad. It doesn't take much to dislodge the keys from the Raptor clipped to my belt, and I have dropped one end or the other a few times. So far, thankfully there has been no loss, but it has made me uncomfortable enough to mention it. I am thinking of removing the magnetic connector and clipping the Raptor directly to the Keysmart Pro and Jeep key with the Nite Ize S-Biners I have. With the S-Biners it will all still be easily separable, but less likely to come apart when I don't want them to. The weight on the "key end" is 101g or just over 3.5oz.
Overall I am still very happy with the Keysmart Pro and I consider it well worth having- these are just a few things that you have to keep in mind when using it!
Def
-
Thanks for the update, Boss

Everytime I see one of those key organizers I really like the way they make the keychain look “clean”. I could just not use them. My car key has the remote built into a chunky plastic housing, so it would never fit into one of these organizers

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login