Black Fire multitool
-
$40 gets a Leatherman Leap so...

I can't look at these tools until they are proven worth. Weight?
-
Anyone else thinking of making these a dedicated diagonal cutter multi tool? Those plier heads look beefy if the heat treat is good.
-
@Happy Gilmore said:
Anyone else thinking of making these a dedicated diagonal cutter multi tool? Those plier heads look beefy if the heat treat is good.I had a real good stare at my Klein which have a similar cutter. It's doable but I can't see the benefit of making it a dedicated diagonal cutter. Maybe I am missing something or have not encounter anything the existing setup can't do/cut. But note i also have a very capable scissor all the time at work to clean cut zipties, even wires, cables etc..

-
@Happy Gilmore said:
$40 gets a Leatherman Leap so...
I can't look at these tools until they are proven worth. Weight?
OK, at $40 we can get a leap, wingman, sidekick rebar, even a preowned wave and many other stuffs. All of them are very good users' tools and are time proven. Well, theres no fun if everyone sticks to the brand name tools. This particular design is pretty interesting imo, considering the Blunt nose, very large cutter and that bit driver. $40, yes I would agree that its rather high for a unknown tool, there's not even any review on it. I, shall be the guinea pig. Pretty excited, but at the same time, prepping myself for disappointment too. It's still be a long wait before I receive this...
-

Sent fra min FRD-L09 via Tapatalk
-
Like always, I will wait until Amazon has it. They have a real good return policy if it sucks, and I still have some Prime membership time available, so can get it fast! >:D
-
The Klein has their lifetime warranty, and has been $20 from Amazon for going on a year now. And quite frankly, even at the $40 it will cost you through an electrical supply house, it's a great deal. Best pliers, cutters, driver, and in a lot of ways blade, in the industry. Still, if the BlackFire goes on sale for around the $20 cost of the Klein, I'm getting one.
Yet this tool does not seem to be covered by any kind of warranty at all. They only mention flashlights and illumination products.
The normal life of the product
Flashlights and Illumination products (other than products containing rechargeable batteries)
One year from the date of purchase
Flashlights and Illumination products containing rechargeable batteries -
@cody6268 said:
The Klein has their lifetime warranty, and has been $20 from Amazon for going on a year now. And quite frankly, even at the $40 it will cost you through an electrical supply house, it's a great deal. Best pliers, cutters, driver, and in a lot of ways blade, in the industry. Still, if the BlackFire goes on sale for around the $20 cost of the Klein, I'm getting one.Yet this tool does not seem to be covered by any kind of warranty at all. They only mention flashlights and illumination products.
Totally agree with the Klein. The only thing is warranty doesn't work that way in many parts of the world.. U guys are lucky. Until recently things started getting a little bit more messy..

-
I actually just ordered one from Home Depot. I should have it by next Tuesday! I will give my first impressions of it when it arrives!

-
One thing I don't get is that fixed Robertson bit. Why not something else? Like an awl?
-
Mine is arriving today today!
-

Looking forward to reading your review, Sam!
-
:D :D The Black Fire Heavy Duty Multitool have arrived, and it does not disappoint. First off, I paid $50 including shipping to my far away land. A little too high than what I wanted to pay for a relatively unknown tool. $35 to $40 sounds better..
Heavy duty, it is. Sturdy, no wobble, feels comfortable in the hand and have a very nice weight to it. A little big to my liking. I said big, not bulky. Cos there are much lesser wasted space like the Klein's Multitool. File could be longer though. Overall, a very well built tool that give u the confidence it will perform. I am pretty harsh on the quality and standards and will not hold back my words on things I do not like.
An overview on the size and design. Size is very similar to the Klein's and the Workpro's. The Blackfire have a angular edge on the scales but there are no hotspots. Finishing is good. Very smooth and nice feeling to it. Great choice of colour too. Metallic gun metal grey.



The two pliers looks to be very similar but are actually different. The Blackfire's is a tiny bit smaller and shorter and have a brushed metal finishing. The klein's have a nicer more polished shine to it. The very large side cutter are precisely machined with the 2 apex exactly meeting each other. I have tried cutting 18 gauge copper stranded and cloth hanger. Works perfectly.

Jaws opens smaller on the Blackfire.

The drop point knife came very sharp. Firm lockup with the liner lock. Smooth oho and easy to disengage. The thumb cut out was a little sharp though, easily fix with a small diamond file.

I have not use the Robertson bit and the bottle opener. The should have chosen something else though. An awl and a prytool should be a much better choice. I have tried the file, works and cuts mild steel. Quality similar to the one on a ST300. Only complain is that it should be longer and there are room for it, a least half an inch more. All are non locking but the nice backspring will hold them in place.

Here comes the Gem of this tool. The long reach bit driver. It gives you 2 double ended bits by default. Will not fill standard bits as they will fall right in. One solution is to superglue some magnets into one end of that bit holder. So, one end, you have the double ended bits, the other, the standard hex bits holder. Bam! Best of both worlds. 8) The driver is non locking and held by the back spring. I have tried some heavy driving on it and it will hold. This is one big excellent chunk of bit driver. The 2 handles doesn't twist or flex on high torque either. Excellent. Excellent. Sssooo excellent. Best bit driver I have seen and used in a multitool so far.


Overall, I really like this tool. Good sturdy construction with very functional tools. If you can live with the size of it, I would say its a very good buy.

Mike, passing the baton to you.
-
Very cool, Sam! Looks to be ones of the better new platforms. :)
-

It is so nice to see such quality in this. Absolutely wonderful.
Thanks, Sam!
-
Sam, thank you for the details and a through review, I wonder where this is made and whether it could be purchased from the origin.

-
Got mine in yesterday! I will not bore all of you and take a picture of it. We all know what it looks like now, and I could not top Sam's photos anyway! First impressions are very good, but not quite as good as the last tool I got, the Bibury. First of all, I love the feel and weight of it. It really does give you confidence in hand. The knife is razor sharp, tools open up pretty smoothly and snap open, but not real tight. More about that in a bit. The pliers looks strong but are not spring loaded. That actually does not bother me as I read several years ago that the internal spring in some of these multitool pliers weakens them. Not sure if that is true or not, but would make some sense as they would be hollow. Now for the bit driver. It looks and feels very robust. The bits that come with it are very well made. I think this tool would handle screw driving tasks a lot of other multitools would not. The only issue I have with it is the adapter that the bits slide into. if you lose this, it makes the driver useless. I would have preferred a more standard 1/4 driver. The other thing is the Robertson driver. Wut the heck??
I cannot say I own any device that has those type of screws. The other bad thing I would say about it is, with all of the inexpensive tools out there these days with locking components, I do not see why this tool did not have them. Only the blade locks. It obviously does not cost any more money to make them this way. I paid over $50.00 for this tool including shipping. is it worth that? Sorry, but will have to say no. A better price would hav ebeen aorund $25.00. However, I am still glad I got it as it is a unique design, and that is one of the things I look for when I add one of these things to my collection! So I like it a lot, but do not love it, if that makes any sense! 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
mine is still far far far away!! A week and a half at least!