Show me your drills
-
Anyone that is still driving screws with drill do yourself a favor buy a cordless 1/4 impact even a cheap one. It will be life-changing. I'm pretty tight-fisted If mine burned tomorrow I would replace it with a new Dewalt I would not even think about it. It is my most used tool.
-
@Mike 56 said:
Anyone that is still driving screws with drill do yourself a favor buy a cordless 1/4 impact even a cheap one. It will be life-changing. I'm pretty tight-fisted If mine burned tomorrow I would replace it with a new Dewalt I would not even think about it. It is my most used tool.Am Impact Driver is hardly the correct tool to drive all screws though I see guys using them for everything all day long too?
They are great for a lot of driving but hardly the solution that many use them for unless you are a Caveman.I find more things broken or mauled since the Impact became so common than ever before.
There are still a lot of advantages to a normal variable speed drill or even more so a near variable speed wrist & hand!
Depends on the job doesn't it?
-
Dude lets agree to disagree. I'll take an impact driver over a drill. I used a boat anchor DeWalt 18 volt for years and liked it. Modern drills have torque settings that work fine if you remember to set them. I have a nice modern DeWalt 20 volt drill I like it for drilling holes. An impact is more balanced for driving screws because that's what it was made for. An impact with a good three inch bit so you can see what you are doing has a much smaller learning curve than a drill they are not on and off at least mine isn't it is variable speed you just bump up smaller screws until you hear the impact and you are done. My Nephew is a general contractor a few years ago we remodeled the house we were living in. I used an impact to R and R kitchen cabinet hardware, install door stops, door handles, light fixtures. We gutted the condo we bought down to the sheetrock. I used an Impact to install all new switches, plugs, small sheetrock patches, kitchen cabinets, all new windows, sliding glass door, french doors, wall hung TVs. You get the idea. My son in law is a mechanic all he uses battery impacts and ratchets most everything.
-

Sent from my iPhone using Tapatalk
-


Sent from my SM-G960F using Tapatalk
-
The Makita are a BEAST I think and they are smooth at the same time.
I run Milwaukee and Makita all day long and there is no real extra power with the bigger batteries just longer run time.
I also carry a so called 20v Dewalt and it is not nearly as powerful as the Red or Green but the charger is tiny and I have tiny batteries for it and it all fits easily in my "First In" bag so it gets the call on every job unless I need more power.I drill with 6' long bits and hole saws a lot and they eat through wood like a powered drill on a fresh battery.
I do wish the Makita Chargers were smaller but OI can't have it all evidently.
-
@MrMckay said:
I am very happy with it. I'm thinking of upgrading to 5ah but people say they're extremely heavy for all day work.Sent from my SM-G960F using Tapatalk
@ezdog said:
The Makita are a BEAST I think and they are smooth at the same time.I run Milwaukee and Makita all day long and there is no real extra power with the bigger batteries just longer run time.
I also carry a so called 20v Dewalt and it is not nearly as powerful as the Red or Green but the charger is tiny and I have tiny batteries for it and it all fits easily in my "First In" bag so it gets the call on every job unless I need more power.I drill with 6' long bits and hole saws a lot and they eat through wood like a powered drill on a fresh battery.
I do wish the Makita Chargers were smaller but OI can't have it all evidently.
Thank you guys! I was wondering any added benefit of having a larger capacity battery, and those info are useful!

-
O after a couple of jobs in a rental I own today I'm thinking of a 10v drill driver. The kind with the 1/4 inch chuck. Torque settings are a must. I've been looking at the older style makita version. Any suggestions?
-
I probably use my 12v Milwaukee Screwdriver as much as anything else in the end.
The versions with the 1/4 chuck are you saying that has a regular tiny chuck or a chuck for driver bits directly?I have the Makita,Dewalt,Rigid,Ryobi,Bosch and Milwaukee in 12v and the Milwaukee is easily the best one of the bunch.
Unlike the 18v the Makita is just sort of wimpy and I think the Bosch is actually the same tool as the Milwaukee and I am pretty sure the batteries could be easily modded to work between them too.
So they are interchangeable to me in case you find a Bosch deal out there? -
@ezdog said:
I probably use my 12v Milwaukee Screwdriver as much as anything else in the end.
The versions with the 1/4 chuck are you saying that has a regular tiny chuck or a chuck for driver bits directly?I have the Makita,Dewalt,Rigid,Ryobi,Bosch and Milwaukee in 12v and the Milwaukee is easily the best one of the bunch.
Unlike the 18v the Makita is just sort of wimpy and I think the Bosch is actually the same tool as the Milwaukee and I am pretty sure the batteries could be easily modded to work between them too.
So they are interchangeable to me in case you find a Bosch deal out there?so stay away from the makita 10v? Yeah the kind the bits fit into
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login