Scissors spring keeps moving
-
Hi folks,
I have a full size SAK scissors where the spring keeps moving out of centred in the little hole at the base which attaches them to the scissors. As such the scissors don't work, they just jam up on the spring. I centre it again but it isn't long till it pops out. Is this a defunct spring or should I just superglue it carefully in place to stop it shifting constantly?
Thanks!
-
I have a full size SAK scissors where the spring keeps moving out of centred in the little hole at the base which attaches them to the scissors. As such the scissors don't work, they just jam up on the spring. I centre it again but it isn't long till it pops out. Is this a defunct spring or should I just superglue it carefully in place to stop it shifting constantly?
Thanks!
That definitely is not normal. Either the spring is defective or there is a problem with the hole it fits in.
-
Is it one of the older models, without the groove on the inside of the plier arm? I do have one that's a little prone to that, and keep meaning to fix it, but never do ::) mine tend to be more of a sideward flex than shifting in the hole though. I think in your case, I'd be tempted to try knocking the spring out, tapping a small nail or pin into the eye of the spring a little to flare it, and then refit it. That might be enough to give it a little more grip.
-
I agree with Vicman and AW.
If it shifts in its mounting hole then that's not normal.
I'd try out a new spring
-
Thanks folks, Been a crazy day in work and not had a chance to read or try. I'm going to try aimlesswanderer's tip and then it's replacement time. Where do I get replacement springs from?
-
OK I've worked out where I've been going wrong. It was a SAK Scissors that I'd modded into an LM Charge.


What's happening is that to open it you have to push against the spring as you can see in the pic above, the finger will always touch the spring. This is why it's got a) loose b) was seemingly always coming out when I opened the scissors despite making sure they were fine when I put them back in. I've used a nail as a punch (thanks for that tip aimless!) and when it was back in I superglued it in place to make sure it stays put. I'll see how long it lasts before trying anything more drastic.
-
I can definitely see why that spring went wonky.
That's not a use case that Victorinox ever thought of, I'm sure! -
Nice mod though

-
Glad to hear you got it sorted

-
Just grind out a notch for the nail nick to be accessible and you'll be fine!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login