Leatherman Free P2/P4 Club and Feedback Thread
-
@Dutch_Tooler said:
Agreed. Question: did you buy the P4 via the LM USA web site?No, the tool was purchased in a shop here in Italy
-
:o basilio - remarkable. I thought they only honoured US acquisitions...
Time to remind them, my related mail must have gone missing. -
@gerleatherberman said:
It is funny, because you cannot use the tool you're putting the clip on, to put the clip on it.
:D
I'm always happy to have spare bits.Sorry. Couldn't help myself. I'm kidding of course.


-
MTMatt,
That made me laugh. Thank you. :)

Going on a tangent of a silly-philosophical nature, Leatherman did miss the point that; claiming a tool that cannot disassemble the tool it is intended to compete with is ridiculous, when the tool that in intended to be competed with can be used to disassemble the aforementioned tool.

-
P2 with bit driver. Leatherman should have made one to go with the tool. I still like the tool a lot its flaws don’t bother me the price does it is over priced and for every one on the other side of the pond I feel your pain it is an crazy amount of money for a multitool. A lot of times when a new tool comes out I wait for the dust to settle and find one at a reduced price the Free is a tool I wanted right a way so I paid the price.

Sent from my iPhone using Tapatalk
-
P4 for the day.


-
I just got an email. The release of the Leatherman Free T series looks to be imminent.
-
Got an envelope from Portland Oregon today
.

Guess the bit is part of the package, since I didn't ask for it. But I do think it's nice they send it along, not everyone is like us, with a collection of tools and the right tools to maintain them, I mean.
Thank you Leatherman U. S. A., it's nice to get a taste of that magnificent service we read about from all our American fellow MTO members, thank you
. -
@Top-Gear-24 said:
Got an envelope from Portland Oregon today
.

Guess the bit is part of the package, since I didn't ask for it. But I do think it's nice they send it along, not everyone is like us, with a collection of tools and the right tools to maintain them, I mean.
Thank you Leatherman U. S. A., it's nice to get a taste of that magnificent service we read about from all our American fellow MTO members, thank you
.Nice. I also contacted them about a clip. I hope they sent it. I never got a reply.
-
@Top-Gear-24 said:
Got an envelope from Portland Oregon today
.

Guess the bit is part of the package, since I didn't ask for it. But I do think it's nice they send it along, not everyone is like us, with a collection of tools and the right tools to maintain them, I mean.
Thank you Leatherman U. S. A., it's nice to get a taste of that magnificent service we read about from all our American fellow MTO members, thank you
.
Very cool that has been rectified. :)Same kit I recieved.
I also appreciated the extra screws. They're not as bad as watch screws and such, but if one were to back out in the pocket, you'd probably never find it. And if one fell onto shaggy carpet.
@genevabuck said:
Nice. I also contacted them about a clip. I hope they sent it. I never got a reply.I hope they sent one. I got a reply within a few minutes of emailing them, with them asking for my address. :)
-
@Dutch_Tooler said:
Time to remind them, my related mail must have gone missing.Well, the world is full of surprises...
*Good Day!
I have made the request for the pocket clip to be sent out to you as a courtesy. You should be receiving that in the mail within the next 2 weeks.
Thanks for contacting Leatherman Tool Group and have a great day!
Xxxxx Yyyyyyyyyyy
Leatherman Tool Group
Consumer Support SpeSmurfpillst*

-
@Top-Gear-24 said:
Got an envelope from Portland Oregon today
.

Guess the bit is part of the package, since I didn't ask for it. But I do think it's nice they send it along, not everyone is like us, with a collection of tools and the right tools to maintain them, I mean.
Thank you Leatherman U. S. A., it's nice to get a taste of that magnificent service we read about from all our American fellow MTO members, thank you
.I tried my luck today and they are sending me one as well ;) Good score Top Gear

-
Great comparison post with the OHT and the P, glbm

Great job LM with all of those clips as well :o

-
Im happy to be able to join this club. I was really excited about it until I saw the price. 140 dollar wasn't a problem for me. But here in the netherlands it cost 200 euro. That was a bit much. Especially since I didn't handled it yet. I travel for an hour just to be able to feel and see the tool in person and woow it felt great.
I always carried a surge on my belt but the P4 has gained that spot ever since. It isn't better then the surge. I don't know if they ever make something better. But it is definitely more beautiful, easier and more fun to use and play with it.I do miss the bit driver definitely hope the "p6" will have it or that leatherman makes an adapter for it. I did notice that it you take a standard 1/4inch square to 1/4 inch hex it will almost perfectly fit onto the Phillips driver. The come with a lot of bit sets so most of you probably already have one.
The file works great but just like most I would like it bigger too. The best option for me would be to swap it with the serrated knife. First of all I don't use the serrated knife to much and when I use it the size of the file would be enough to be usable.
I think the awl does do it's job. But my personal preference would be to have it just like the surge awl. You will lose the flat screwdriver but I think they could have added it to the can opener just like sog or victorinox does. Especially if it was shaped like the one on the squirt that small 2d Philips and glasses driver combo works really great in my opinion. And has saved me a lot of times when other driver weren't strong or small enough.
Just my opinion on the tool. Overall I'm happy with it.




Sent from my ONEPLUS A3003 using Tapatalk
-
Welcome and congrats on the P4, jorritvS! Thank you for sharing!

Indeed, it is a joy to handle and use. And the file over serrated blade would be awesome.

I am not too far from grinding a little bit off of the phillips shank to make it work better with bit adapters. I just get nervous about fiddling with such an expensive tool. :ahhh
-
I didn't grind anything off for it to fit. I also wouldn't do that on a tool this expensive. It just fitted without any modification necessary. That is also why I like it and why I did share it.
Sent from my ONEPLUS A3003 using Tapatalk
-
@gerleatherberman said:
Welcome and congrats on the P4, jorritvS! Thank you for sharing!
...
-
@jorritvS said:
I didn't grind anything off for it to fit. I also wouldn't do that on a tool this expensive. It just fitted without any modification necessary. That is also why I like it and why I did share it.Sent from my ONEPLUS A3003 using Tapatalk
Thanks for clarifying!

Will have to dig through the spare parts bins this evening. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login