Just got this today!!
-
I notice this is selling too at Amazon US at $31....
-
Did we confirm that it's 1/4 inch driver?
-
@Sam Lim said:
From the looks, its should be a double ended bits. Probably with a ball indent on the bits itself. So a regular hex bit will fall right in. That's probably why there is a bit extender in his picture.is it bad I want to see if the pivots have any similarity to those in a Leatherman so I might be able to use the 1/4 inch driver?

-
@Sam Lim said:
From the looks, its should be a double ended bits. Probably with a ball indent on the bits itself. So a regular hex bit will fall right in. Thats probably why there is a bit extender in his picture.That is correct. However, if you use an extended length bit, it fits right in and stays there. It is a 1/4" socket.<a href="https://ibb.co/9V6x1S0"><img src="https://i.ibb.co/9V6x1S0/Mtool7.jpg" alt="Mtool7" border="0"></a>
-
@mikekoz said:
That is correct. However, if you use an extended length bit, it fits right in and stays there. It is a 1/4" socket.<a href="https://ibb.co/9V6x1S0"><img src="https://i.ibb.co/9V6x1S0/Mtool7.jpg" alt="Mtool7" border="0"></a>
needless to say, I have ordered one. 
-
Nice writeup, Mikekoz!

Thank you for taking the time to do it.

-
Looks bada$$!!! Pocket clip?

-
@BauerMobileToolSystems said:
Looks bada$$!!! Pocket clip?
It does have a pocket clip. Cannot believe I did not take a photo of the other side of the tool!
-
@Sam Lim said:
needless to say, I have ordered one. 
Sam, plz let me know what you find out about this tool. It seems way too nice honestly to be true. All outside opening tools...full 1/4" bit exchanger... It has the big 4 tools (minus Scissor) and an Awl, something that is constantly missing from tools.
can you give us the amazon link?
Edit:
BIBURY 21-in-1 Multitool with Pocket Knife, EDC Self-locking with Sheath - Amazon.com
BIBURY 21-in-1 Multitool with Pocket Knife, EDC Self-locking with Sheath - Amazon.com
(www.amazon.com)
found it
-
Had this for a few days now. Not really using it though. Just my in hands impression.
First of, as Mike said, it is a really big tool but have a very sturdy constuction. Feeling in the hands are very similar to the Workpro's HD MT. Scales are a little sharp to my liking.. Tools while they looked to be very well machined, I find the finishing to be too glossy, not Spirit kind of polished but almost like chrome plated which I am not too fond of.. They reminded me of the finishing on the mossy oak tools but better. Pliers are quite the same as those found on mossy oak too.. Spring loaded, lesser pivot tolerance, wouldn't cut copper stranded.... :( my unit came with marred pivot screws btw
Now the bit driver.. The bits are double ended and are held in place by the little magnet in the bit holder. Here's the problem.. Imagine having a pointy philips head on the other end in the bit holder, pressing down on the little magnet while you doing some serious driving, I am not sure how long the magnet can survive. And the contact between the magnet and the bit is not much. The bit doesn't drop, but its not a very secure contact either..From how I see it, quality and finish is between the mossy oaks and the Workpro HD.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login