Bolsters advice
-
Anybody?
-
Your question is directed to a tiny subsection of the modding community craggus :D I hope there's an answer on its way for you but very few people have attempted this particular mod .
I can't wait to see what you do

-
I've planned on doing something similar, but haven't started yet, as life issues keep getting in the way.
I'll be aiming to get the scale tools in to, and won't be soldering, in case the solder finds its way into the voids, and buggering up the use of scale tools. Traditionally, the holes for the pivots were drilled with tapered bits, so when peening, there was no risk of pull through. I think countersinking them might work, but I'd be tempted to try counterboring with the next drill size, for a little less extreme step.
-
@magentus said:
Your question is directed to a tiny subsection of the modding community craggus :D I hope there's an answer on its way for you but very few people have attempted this particular mod .I can't wait to see what you do

True, I should have realised that. Wasn't meant to sound impatient! I'll wait and see...
-
@AimlessWanderer said:
Traditionally, the holes for the pivots were drilled with tapered bits, so when peening, there was no risk of pull through. I think countersinking them might work, but I'd be tempted to try counterboring with the next drill size, for a little less extreme step.Good point, counterboring sounds like a good idea :)
-
Did you see this thread, a few below yours? /topic/55599
-
Yep, it was partly that thread that influenced some of my ideas

-
I used plumbers solder when I did this knife Crag
I will be trying silver solder on other projects in the future

-
@Sparky415 said:
I used plumbers solderHow did you find it? Has the knife held up well?
-
It's not had a huge amount of use but I don't see why it would fail
after all copper pipes in a house hold up well
-
I have a similar mod planned and I did pick up some silver solder, mostly because I was in a store that sold it and it's not actually that expensive. I don't think it will make much difference in strength but I believe it is supposed to be less visible (thinner?).
-
I've got some silver solder arriving today, so hopefully will get some time tonight to try it out!

-
@NutSAK said:
It's awesome that you were able to score such a beautiful example of Scott's work Def!
Here is some documentation that you might want:
This is the detailed documentation that accompanied my Soldier mod: https://www.dropbox.com/s/ek1jwjycl7orc44/Old_School_Victorinox_Soldier.pdf?dl=0
This is a snapshot of his website from the Wayback Machine: https://web.archive.org/web/20100513043649/http://knifecooperative.com/
Pics of my '05 Knifecoop Oldschool Soldier:


/topic/76781
-
Ive been working on some bolstered 58mm scales. Just used regular plumbing solder to solder the bolsters to the brass liners but one fell off as I was filing so I superglued it back temporarily and it seemed to hold up just as well as the solder did to the shaping =O!!
Knowing that Im going to pin through the bolsters anyway I was planning on leaving that one bolster glued and relying mostly on the pins. Also planning on opening the very top of the 1.6mm holes up to 2mm and sanding the pins flush afterwards so I will let you know how that goes.
Right now though I cant decide if I want to put a bolster groove in or not so its just going to sit on my desk for a while unless some of you can help me decide. Yea or nay to the bolster groove?

-
I don't know about a bolster groove, but those are some fine craftsmanship!

-
@Jspiggle said:
Ive been working on some bolstered 58mm scales. Just used regular plumbing solder to solder the bolsters to the brass liners but one fell off as I was filing so I superglued it back temporarily and it seemed to hold up just as well as the solder did to the shaping =O!!Knowing that Im going to pin through the bolsters anyway I was planning on leaving that one bolster glued and relying mostly on the pins. Also planning on opening the very top of the 1.6mm holes up to 2mm and sanding the pins flush afterwards so I will let you know how that goes.
Right now though I cant decide if I want to put a bolster groove in or not so its just going to sit on my desk for a while unless some of you can help me decide. Yea or nay to the bolster groove?

Simples... you should do what pleases your eye the most.

Excellent skills by the way!

-
Grooves.
-
I want one of each!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



