The great SOG show-off thread.
-
@Max Stone said:
Ok good info GLBM.
So production of the PPP probably started around 1996 with a production run 20+ years which is impressive indeed.
Thank you for the information and the work you have done to answer some lingering questions!
Impressive indeed!
SOG's older models weren't as refined as LM, Vic and Gerber. But, all in all, they seem to me like the most "working man's tool" MT. The PowerLock, PowerPlier and PPP are some of my favorite tools to handle. Glad to see a fellow MT enthusiast enjoying some of that former SOG glory.
Sadly though, last minute cost cutting on their newer tools has nearly driven SOG into the toilet bowl. :-[
-
One more patent oddity. Most of the early PowerLocks have "Patent 5809599" stamped underneath "SOG PowerLock".
I have one PowerLock with just "Patent". No Pend. or Patent number.
The prime differences(other than the patent thing) between it and most older PowerLocks are the pliers, saw and SE blade. The no patent number pliers have the small crimper only and have a sharper grind polish instead of the high polish of most early PowerLocks. The older saw is fine cut(& shorter with a more curved profile) while the normal saw is aggressive cut(& longer). SE blade has a different serration pattern as well.
Pics. Left is no patent nunber version and the right is the patented version.



Non-patent numbered.

Patent numbered.

-
Good info GLBM and fun playing detective.
I can imagine the marketing guy saying to the production guy “we must put our patent number on the tool!” and the production guy saying “but we keep getting our filings rejected so we don’t know what the patent number could be!”
So I suspect that the one with just Patent stamped is probably towards the end of their patent submission efforts, when they were confident their patent application would succeed, so around 1996.
These stamp tools would have been expensive to make and outsourced, so it may even have had a number that they had to file down?
-
@Max Stone said:
Good info GLBM and fun playing detective.I can imagine the marketing guy saying to the production guy “we must put our patent number on the tool!” and the production guy saying “but we keep getting our filings rejected so we don’t know what the patent number could be!”
So I suspect that the one with just Patent stamped is probably towards the end of their patent submission efforts, when they were confident their patent application would succeed, so around 1996.
These stamp tools would have been expensive to make and outsourced, so it may even have had a number that they had to file down?
Thank you for the good work, Max!

The PL with just Patent on it looks to be have been produced that way, and not changed later. The pliers head has USA cast in at the pivot base(which I should have pictured, but my brain is scattered). Perhaps they made a batch where they said "well, we don't know the Pat. #, so we'll leave a place to engrave it later." Then nobody bothered to ever change it. Maybe it was an early demo tool or prototype?

When buying it, I almost couldn't believe it. A mint OG PowerLock without a patent....odd. Hit the buy it now button pretty fast.

-
I probably wasn’t clear on the stamp. What I was getting at is that the tool SOG used to stamp the logo and patent wording may have been modified on the one with only ‘Patent’ stamped without the number. These stamps would have been outsourced with probably a long lead time, so SOG may have simply filed off the number...just an idea to explain why they had the word ‘Patent’. And it does seem to be in the same place as the later stamp that they would have had tooled up when the final filing was awarded. I’m guessing it is a stamp though (like mine) and not a tungsten point engraving method of marking, which could have been just a CNC program adjustment...
-
Thanks for clarifying, Max!

-
And just for a little more fun, here’s a closeup of the earlier logo design when SOG was based in Edmonds (on the PP) before they moved down the road to Lynnwood and settled on the newer angular logo.


-
@Max Stone said:
And just for a little more fun, here’s a closeup of the earlier logo design when SOG was based in Edmonds (on the PP) before they moved down the road to Lynnwood and settled on the newer angular logo.
Cool!

If it would help, I can take some more close up photos of each generation version of the older SOGs. I think there are a couple(or more) of angular insignia styles if memory is correct. -
Definitely will help GLBM. I cannot find any reference to SOG moving premises, I’m guessing it was a capacity issue sometime in the mid-90’s as they were still a young company at the time. Tracking across a few of the models from that timeframe will help, also to put the logo into a timeframe.
The PP I got came with a great colour fold-out brochure stuffed inside, so I also plan to scan this for reference. Lists all their MTs on one side and knives on the reverse. Address as Lynnwood on of brochure, so presumably they had inventory they updated after the move, or may have been added by the distributor later.
-
The idea, I had in my head about pictures of tools helping, didn't resolve as imagined. But, in their lackluster state, here they are; for whatever they're worth.

Three different PowerAssist Stampings(two variations of the early one and one of the newer one).

Four PowerLocks. Two variations of the early stamping and two different later versions.

Five different PowerLock/Assist pliers heads. Two variations of the earlier version and three other castings.

Three different PocketPowerPliers.

Three PPP pliers heads(two variations of the early one and one later casting) pictured with the PT-510 pliers head.

-
Lots of variations GLBM. Yours pics are clear enough so we can document these differences. I’ll cross-reference what’s in the MT Encyclopedia to see what lines up and if there are discrepancies.

-
Many thanks for you work with all of this, Max!

It is really cool to see some SOG information being uncovered. :)
SOG is really the only brand board-represented on MT.o that lacks a strong information base. :ahhh
Oh course, SOG doesn't make it easy with their lack of records and information.
-
The brochure that came with the PP lists the “P2” (Power Plier), the “P3” (Pocket Power Plier), Paratool (“Another great design from the team of Blackie Collins and Spencer Frazer”), the ToolClip and the Micro ToolClip. This brochure pre-dates the Internet, so a great informative reference. Difficult to photograph because of reflections and size. Will need to be scanned. I’m certain we can add some good info to build out the encyclopedia.


-
Wow! That is nice, Max! Thanks for posting that one!

That is the oldest brochure for SOG MTs I've seen. :o
Looking forward to the scan.
-
Got a new to me SOG PowerLock in black oxide. Came in pretty good shape. Just needed a good cleaning and some WD-40. Didn’t come with a sheath so I am going to have to look for one.
JonesE

-
That is a an uncommon one, JonesE!

The piano locks weren't used for long on the early PowerLock 2.0 versions before going back to the solid lock lever. USA made too(indicated by the hex bolts). :)
-
Added a "Master Mechanic" branded PPP to the PPP mix.









-
PPP one of my favourites.

-
Thanks for the info on the PowerLock GLBM. I didn’t realize the piano locks were that rare.
Great job finding a very nice Master Mechanic PPP. It sure looks nice.
JonesE
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login