Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

This years projects.

Scheduled Pinned Locked Moved Edged Tools
55 Posts 1 Posters 2.8k Views
  1. Home
  2. Tool Talk
  3. Edged Tools
  4. This years projects.
This years projects.
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Dean51 Offline
    Dean51
    Posts: 4,558
    Dean51 Offline
    Dean51
    wrote on last edited by
    Quote Reply

      Earlier this year I swore off getting any new knives, don't worry about me I'm still in the rabbit hole.
      What I'm doing is working on knife projects, I've got a dozen knives here that need slight tweeks that will make a big difference in them. Or that I've reground but left half finished. The half finished grinds are as ground on a 120 carbide belt, they're a bit scratchy looking.

      I ordered some new silican carbide sanding belts that came in yesterday, 400, 800 and 700 trizat.
      So at 6 AM I pulled out these four knives and went to work. There's a lot of difference between 120 grit and 400 grit. I could have stopped there but they still had a scratchy look and and I wanted to try out the 800 grit. The 800 grit has a nice satin look, rather than the scratchy look it had before. I think I'll stop there for now, but maybe not I still have to try the trizat belt.1095 is the only steel I like polished because that seems to make it harder for a patina to get started.

      Tomorrow I'm going to tackle the Euro barlows.

      1 Reply Last reply
      • RF52 Offline
        RF52
        Posts: 5,787
        RF52 Offline
        RF52
        wrote on last edited by
        #1 Quote Reply

          Nice! :like: Good looking knives :hatsoff:

          Sent fra min FRD-L09 via Tapatalk

          1 Reply Last reply
          • Wspeed Offline
            Wspeed
            Posts: 76,225
            Wspeed Offline
            Wspeed
            wrote on last edited by
            #2 Quote Reply

              :iagree: excellent work :like: :tu:

              1 Reply Last reply
              • SteveC Offline
                SteveC
                Global Moderators
                Posts: 73,535
                SteveC Offline
                SteveC
                Global Moderators
                wrote on last edited by
                #3 Quote Reply

                  :like: :iagree: :tu:

                  Nice job Dean !

                  1 Reply Last reply
                  • Sparky415 Offline
                    Sparky415
                    Posts: 13,000
                    Sparky415 Offline
                    Sparky415
                    wrote on last edited by
                    #4 Quote Reply

                      :iagree: :iagree:

                      1 Reply Last reply
                      • Dean51 Offline
                        Dean51
                        Posts: 4,558
                        Dean51 Offline
                        Dean51
                        wrote on last edited by
                        #5 Quote Reply

                          :salute:
                          Thanks all. I am having fun, i tend to go nuts with nothing to do.

                          1 Reply Last reply
                          • David Offline
                            David
                            Posts: 9,246
                            David Offline
                            David
                            wrote on last edited by
                            #6 Quote Reply

                              Those knives are looking really good Dean. Good job! :like:

                              1 Reply Last reply
                              • David Offline
                                David
                                Posts: 9,246
                                David Offline
                                David
                                wrote on last edited by
                                #7 Quote Reply

                                  @Dean51 said:
                                  :salute:
                                  Thanks all. I am having fun, i tend to go nuts with nothing to do.

                                  Hmmm :think: nothing to do huh. :think: Let's see here. :think: May be Moose might get loose and come down for a visit. :D

                                  Moose.jpeg

                                  1 Reply Last reply
                                  • MadPlumbarian Offline
                                    MadPlumbarian
                                    Posts: 38,623
                                    MadPlumbarian Offline
                                    MadPlumbarian
                                    wrote on last edited by
                                    #8 Quote Reply

                                      Very nice, have fun!
                                      JR

                                      1 Reply Last reply
                                      • pomsbz Offline
                                        pomsbz
                                        Posts: 2,595
                                        pomsbz Offline
                                        pomsbz
                                        wrote on last edited by
                                        #9 Quote Reply

                                          Nice work!

                                          1 Reply Last reply
                                          • comis Offline
                                            comis
                                            Posts: 11,394
                                            comis Offline
                                            comis
                                            wrote on last edited by
                                            #10 Quote Reply

                                              Dean, that's great work! Very even looking, looks awesome!

                                              Btw, thank you for you and Steves' previous comments on rounding the tang, my GEC 54's pull has gone down from a 9 to 8, I am in process of keeping the blades open to mildly weaken the spring(been a few days, not very noticeable difference, but gonna give it another week or two). I don't want to round the tang too aggressively, since I think it only really affects the pull once it is partially open.

                                              1 Reply Last reply
                                              • Gerhard Gerber Offline
                                                Gerhard Gerber
                                                Posts: 3,832
                                                Gerhard Gerber Offline
                                                Gerhard Gerber
                                                wrote on last edited by
                                                #11 Quote Reply

                                                  I could kill for some trizact belts, but it seems my chances of getting pregnant are better :facepalm:

                                                  Very nice work Dean! :cheers:

                                                  Many questions......

                                                  What grinder are you using?

                                                  Grinding edge up?

                                                  Speed? (just for interest sake)

                                                  I'm very much interested in your technique simply because I can't figure out a way that will give such nice results and not lead to some cut belts.

                                                  Flip it over and cut fingers is the next option :rofl:

                                                  1 Reply Last reply
                                                  • Dean51 Offline
                                                    Dean51
                                                    Posts: 4,558
                                                    Dean51 Offline
                                                    Dean51
                                                    wrote on last edited by
                                                    #12 Quote Reply

                                                      GG lots of questions, I'll work on making up answers thru the day.

                                                      1 Reply Last reply
                                                      • Dean51 Offline
                                                        Dean51
                                                        Posts: 4,558
                                                        Dean51 Offline
                                                        Dean51
                                                        wrote on last edited by
                                                        #13 Quote Reply

                                                          Sod busters which I never liked have become a favorite this year, as close to perfect as the GEC is there's always room for improvement or to personalize.
                                                          The #71 was a slight bit harder to open than I usually like, going to see if it can become a little easier to open and keep it's strong snap when locking open.

                                                          The spring on the GEC is just a bit shorter than the tang and that's not a problem other than it causes a bit more drag when opening.

                                                          Tangs are usually left as stamped and only finished enough to fit and flush the back spring. In this case I cleaned up the stamping marks and put a small angle (less than 10 degrees) on the tang end that contacts the spring. That made the first 10 or 15 percent of the opening much smother but didn't affect the rest of the opening.

                                                          I then added a small half radius to the tangs corner that smoothed it out until it was half way to the half stop. Where it still snaps in with authority.
                                                          If I can explain it better. I rounded the first part of the tangs corner but stopped half way and didn't put a full radius in the corner.

                                                          I didn't want to soften up the opening snap just smooth it out a bit, so the opposite tang corner got a very small radius. Really just took the 90 degree corner off.

                                                          It came out better than expected, now it's the perfect GEC sodbuster.

                                                          1 Reply Last reply
                                                          • David Offline
                                                            David
                                                            Posts: 9,246
                                                            David Offline
                                                            David
                                                            wrote on last edited by
                                                            #14 Quote Reply

                                                              @Dean51 said:
                                                              Sod busters which I never liked have become a favorite this year, as close to perfect as the GEC is there's always room for improvement or to personalize.
                                                              The #71 was a slight bit harder to open than I usually like, going to see if it can become a little easier to open and keep it's strong snap when locking open.

                                                              The spring on the GEC is just a bit shorter than the tang and that's not a problem other than it causes a bit more drag when opening.

                                                              Tangs are usually left as stamped and only finished enough to fit and flush the back spring. In this case I cleaned up the stamping marks and put a small angle (less than 10 degrees) on the tang end that contacts the spring. That made the first 10 or 15 percent of the opening much smother but didn't affect the rest of the opening.

                                                              I then added a small half radius to the tangs corner that smoothed it out until it was half way to the half stop. Where it still snaps in with authority.
                                                              If I can explain it better. I rounded the first part of the tangs corner but stopped half way and didn't put a full radius in the corner.

                                                              I didn't want to soften up the opening snap just smooth it out a bit, so the opposite tang corner got a very small radius. Really just took the 90 degree corner off.

                                                              It came out better than expected, now it's the perfect GEC sodbuster.

                                                              The spring on last years 71 is stout. Sounds like you got it where you want it. :tu:

                                                              1 Reply Last reply
                                                              • Dean51 Offline
                                                                Dean51
                                                                Posts: 4,558
                                                                Dean51 Offline
                                                                Dean51
                                                                wrote on last edited by
                                                                #15 Quote Reply

                                                                  @David said:
                                                                  Hmmm :think: nothing to do huh. :think: Let's see here. :think: May be Moose might get loose and come down for a visit. :D

                                                                  I'll have a bucket of oats and corn for him and promise to eat only fish. :)

                                                                  1 Reply Last reply
                                                                  • Dean51 Offline
                                                                    Dean51
                                                                    Posts: 4,558
                                                                    Dean51 Offline
                                                                    Dean51
                                                                    wrote on last edited by
                                                                    #16 Quote Reply

                                                                      @Gerhard Gerber said:
                                                                      Many questions......

                                                                      **What grinder are you using?

                                                                      Grinding edge up?

                                                                      Speed? (just for interest sake)

                                                                      I'm very much interested in your technique simply because I can't figure out a way that will give such nice results and not lead to some cut belts.

                                                                      Flip it over and cut fingers is the next option** :rofl:

                                                                      This is the grinder I'm using, it's a Ryobi 4x36. It's a good mower blade sharpener but the plate is one piece folded to fit. that fold makes the edge of the plate not perfectly flat all the way to the sides. You need to work on the side of the plate to get all the way to the tang, technique is needed to overcome that.
                                                                      I'm going to make a 1 1/2" x 1/2" cut out on the rolled edge of the plate and correct that.

                                                                      This is the grinder I want, My grinder is 1 hp and can run 2 10" wheels but I only keep one wheel on it at a time so it will spin up faster. I could bolt this attachment to the right side and be good to go.
                                                                      Multitool 4x48, sold by Trick-Tools

                                                                      Grinding

                                                                      Grinder speed is default for the machine. The secret is no more than two passes before cooling in water and never apply to much pressure. Especially at the tip, a blade will pick up heat fast there. I'm a bit paranoid about heat, I won't let the blade get more than comfortable luke warm. I have a gizmo that will slow down an AC motor and still let it retain torque but I don't use it.

                                                                      Don't worry about cutting belts even at .014 behind the edge you're still .007 from the belt. :whistle:
                                                                      The first blade that wasn't practice I did nick the spine with the 80 grit belt, it cleaned up nicely. well mostly any way, at least it was not an expensive knife.
                                                                      Laying the blade on the belt is just technique kind of like free handing. When you're an 1/8 from the belt level the blade , lower and level, lower and level then gently touch the belt level and grind.

                                                                      My technique is to hold the knife like you were cutting a waist high box just firm enough to have control of the handle. Rest the butt of my other hand on the opposite side of the knife. The reason I use one finger on the blade is it's very easy to over grind the belly of the knife, using one finger allows you to keep pressure on the spine in the tip and belly area. Or apply more pressure to an area that might need more grinding. Work with a wet blade and finger tip so it will slide under your finger better.

                                                                      To grind I work the blade two ways either pull the blade under my finger or pull my finger back towards the tip either way works. To work the tip and belly area and keep at least some finger prints I work it separably as I go. Instead of sliding my finger off the tip onto the belt. I use the handle and apply slight up words lift to the handle for the tip and belly area. That tip/belly area is the one you have to watch, with less metal it's easy to over grind or worse yet over heat.

                                                                      Keep water handy.
                                                                      A micrometer or caliper is needed with very little practice you can hold plus or minus .001 to .0005.
                                                                      band aids. :rofl: you never know. I've never drawn blood but did loose a couple layers of skin working a Queen city muskrat tip.

                                                                      This is hard to explain, it makes sense to me but not sure it it will come out and mean anything to you.

                                                                      1 Reply Last reply
                                                                      • SteveC Offline
                                                                        SteveC
                                                                        Global Moderators
                                                                        Posts: 73,535
                                                                        SteveC Offline
                                                                        SteveC
                                                                        Global Moderators
                                                                        wrote on last edited by
                                                                        #17 Quote Reply

                                                                          :like: :tu:

                                                                          1 Reply Last reply
                                                                          • Wspeed Offline
                                                                            Wspeed
                                                                            Posts: 76,225
                                                                            Wspeed Offline
                                                                            Wspeed
                                                                            wrote on last edited by
                                                                            #18 Quote Reply

                                                                              Nice belt sander Dean :like: :tu:

                                                                              1 Reply Last reply
                                                                              • David Offline
                                                                                David
                                                                                Posts: 9,246
                                                                                David Offline
                                                                                David
                                                                                wrote on last edited by
                                                                                #19 Quote Reply

                                                                                  @Dean51 said:
                                                                                  This is the grinder I'm using, it's a Ryobi 4x36. It's a good mower blade sharpener but the plate is one piece folded to fit. that fold makes the edge of the plate not perfectly flat all the way to the sides. You need to work on the side of the plate to get all the way to the tang, technique is needed to overcome that.
                                                                                  I'm going to make a 1 1/2" x 1/2" cut out on the rolled edge of the plate and correct that.

                                                                                  This is the grinder I want, My grinder is 1 hp and can run 2 10" wheels but I only keep one wheel on it at a time so it will spin up faster. I could bolt this attachment to the right side and be good to go.
                                                                                  Multitool 4x48, sold by Trick-Tools

                                                                                  Grinding

                                                                                  Grinder speed is default for the machine. The secret is no more than two passes before cooling in water and never apply to much pressure. Especially at the tip, a blade will pick up heat fast there. I'm a bit paranoid about heat, I won't let the blade get more than comfortable luke warm. I have a gizmo that will slow down an AC motor and still let it retain torque but I don't use it.

                                                                                  Don't worry about cutting belts even at .014 behind the edge you're still .007 from the belt. :whistle:
                                                                                  The first blade that wasn't practice I did nick the spine with the 80 grit belt, it cleaned up nicely. well mostly any way, at least it was not an expensive knife.
                                                                                  Laying the blade on the belt is just technique kind of like free handing. When you're an 1/8 from the belt level the blade , lower and level, lower and level then gently touch the belt level and grind.

                                                                                  My technique is to hold the knife like you were cutting a waist high box just firm enough to have control of the handle. Rest the butt of my other hand on the opposite side of the knife. The reason I use one finger on the blade is it's very easy to over grind the belly of the knife, using one finger allows you to keep pressure on the spine in the tip and belly area. Or apply more pressure to an area that might need more grinding. Work with a wet blade and finger tip so it will slide under your finger better.

                                                                                  To grind I work the blade two ways either pull the blade under my finger or pull my finger back towards the tip either way works. To work the tip and belly area and keep at least some finger prints I work it separably as I go. Instead of sliding my finger off the tip onto the belt. I use the handle and apply slight up words lift to the handle for the tip and belly area. That tip/belly area is the one you have to watch, with less metal it's easy to over grind or worse yet over heat.

                                                                                  Keep water handy.
                                                                                  A micrometer or caliper is needed with very little practice you can hold plus or minus .001 to .0005.
                                                                                  band aids. :rofl: you never know. I've never drawn blood but did loose a couple layers of skin working a Queen city muskrat tip.

                                                                                  This is hard to explain, it makes sense to me but not sure it it will come out and mean anything to you.

                                                                                  I mostly unstand your technique but not sure I could pull it off as well as you do. :tu: :)

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Edged Tools
                                                                                  4. This years projects.
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0