What did you use your Leatherman for today?
-
.

-
Excellent work Raoul

-
I had to negotiate a repair on my ceiling-fan. It seems the three-speed fan switch snapped the ferrule-off, where the pull-chain goes through. A new switch was called for. The mighty Wave Plus helped on the disassembly.



Mission accomplished, new switch!
-
I put together an IKEA paper holder using my P-2. All four screws.


Sent from my iPhone using Tapatalk
-
@Raoul Octav said:
I needed the multimeter yet one cable broke and i had to resolder it, so here came the P2 for the rescue. Quite happy with the easy axx to the tools, at least for this low force, skilled craftsmanship that i'm doing :)Kinda late for a reply but it looks like you are stripping the cable with the awl. Did you know that the P2 has a wire stripper build into the tool?


Sent from my ONEPLUS A3003 using Tapatalk
-
that wire stripper is for a determined thickness, it's easier with that sharp side of the awl
-
Great uses everyone

-
Allright allright allright, so... I've used the Free P2 quite intensive the last 2 days in da house. I like the ease of deployment, it came in hand, jobs did not involved a lot of torque to be aplied, the 2 philips and straight screwdrives had most action. P2 failed me on the small screw on the TV remote battery cover.
P2 rulz Ikea

-
Nice work Raoul shame it failed on the tv remote screw

-
Did a small bikeride in the evening just to get some fresh air.
Right before dusk I noticed my bike light became a bit loose and was flickering.BO ST200 for the rescue! Tightened the nut holding the light, and then taking the plug connecting the light to my hub dynamo apart to find one cable loose. Put it all together and light was on again!
Sorry folks, but no pics of a black tool in the dark

-
Good use Shuya. I guess the BO was doing its job then.

-
Nice work Shuya

-
My router keeps choking regularly, and forces me to reboot it. I isolated the root cause to be overheating and entering protection mode.
So... I used the P2 and drillmachine to give it some fresh air. I intend to mount somehow that aluminium radiator... But i'm not 100%sure on the approach.


-
Good luck hope you can get it to work properly again Raoul

-
It works, no problem on that, to see how it will cool from this point on.
-
Excellent fingers crossed that it will cool properly Raoul

-
Well, the router seems to have a lower temperature, hand feeling. Now to stress it and see if it will choke while streaming in a hot day.

-
@Raoul Octav said:
My router keeps choking regularly, and forces me to reboot it. I isolated the root cause to be overheating and entering protection mode.
So... I used the P2 and drillmachine to give it some fresh air. I intend to mount somehow that aluminium radiator... But i'm not 100%sure on the approach.Well done, mate! Have the same issue from time to time with my apple time capsule but don’t wanna still it just yet
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login