Shooters Tool
-
Leatherman has a small start with the choke tube tool on the Vista. I recall reading somewhere that Tim Leatherman is a bird hunter.
Joe
-
I'd almost forgotten that Wenger had made some SAKs that included a sight tool for the Swiss service rifle,IIRC the Sig 559,and I think maybe another onboard gun specific tool.
-
I've handled the Beretta tools. They are both made in China. :( Quality is not what one expects from Beretta. The hammer tool is pretty unique, and seems to be built better than their plier tool.
The only other specialized "firearms" multitool that comes to mind is the Caspian Arms Pocketsmith tools. Link: http://www.caspianarms.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=CAL&Category_Code=TPS
They have an array of pin punches and such, plus a unique set of plier jaws designed to remove the barrel nut on 1911-style semiauto pistols. The original Pocketsmith was really cheaply constructed. :( The Pocketsmith II is built much better.

-
The caspian tool seems to be the better of the firearms specific tools. I wish that someone would create aftermarket tools for the SOG before I attempt it myself. I was looking at the wenger super tool (you know the one that you could carry as easily as a 2"x4". It has a "pointer" looking device that if improved upon could function as a pistol cleaning rod. What sparked my interest in this is when I took my .22's out for a date the other day. I used about 5 seperate tools. I used my multi to open a package of scope rings, and a few assorted screwdrivers and punches to do other things. However a stuck case in one of my pistols rendered it inoperable due to the lack of a cleaning rod which I dont usually carry to the range. A multitool with a few (3-4) gun specific implements would allow me to carry all of my range tools on my belt.
-
Quality is not what one expects from Beretta.
You obviously have never encountered one of their knives. ::)
Much like other respectable firearms manufacturers they have lent their names to super cheap knives and tools in exchange for a dump truck filled with bills of random denominations.
Def
-
I agree with you Def, some companies make unfortunately put their name on some really crappy stuff. One of my favorite companies in the whole world, Ruger, has their knives made by Case. :) They may not have a super duper tactical folder but then again, ruger is not a "tactical" gunmaker. The knives they put their name on are as solid as their firearms and that is really Tough.
-
There are the Gerber Weapon Cleaning Kits that are in the Goverment Sales part of their site
http://www.gerbergear.com/governmentsales.php?showall=1
Scroll down there are 4 different versions for different weapons.
They concist of a black MP600 needlenose pliers, Ultra Infinity LED torch and Otix cleaning gear for different fire arms made for law enforcement and the military.
Pouch is a bit big, not an all in one tool and it looks as though they are pricy.Dave
-
Smith & Wesson have a series of chinese knives. I own a boot knife which is pretty solid for being as cheap as it was.
-
S&W knives are owned by Taylor Cutlery, which is a US Marketing agency that has killed several good old US names, including Schrade. Friends don;t let friends buy Smith & Wesson, but if you absolutely have to, stick with the fixed blades. Less parts for the 5 year olds assembling them to screw up.
A former roommate of mine had to have the S&W SWAT knife (he thought SWAT teams were really cool and bought anything with SWAT on it) and the liner lock would actually move to the opposite side of the blade and get jammed between the tang and the liner. Typical of this brand- I have seen quite a few like that.
Def
-
Browning sold a tool produced by Kutmaster as part of a firearms maintenance kit a few years ago. It included choke wrenches, pin punches, a takedown cleaning rod, brushes, etc. The multitool was only one component of the entire kit, but it was a good one.

-
@Defender said:
S&W knives are owned by Taylor Cutlery, which is a US Marketing agency that has killed several good old US names, including Schrade. Friends don;t let friends buy Smith & Wesson, but if you absolutely have to, stick with the fixed blades. Less parts for the 5 year olds assembling them to screw up.A former roommate of mine had to have the S&W SWAT knife (he thought SWAT teams were really cool and bought anything with SWAT on it) and the liner lock would actually move to the opposite side of the blade and get jammed between the tang and the liner. Typical of this brand- I have seen quite a few like that.
Def
I was naieve at the time and wasn't really "into" the whole knife world when I ordered it. Dumb me researched what I could legally carry here in RI/Mass and found out that a dagger was illegal...AFTER I got the knife. Soon after that I started actually researching what knives were what, what to look into and what to disregard. Live and learn I guess

-
Not to go too far off topic and into a whole "I hate S&W" rant, there's a thread over at KF from a year or two ago in which some poor bugger ordered a S&W folder, then while waiting for it to arrive, asked what people thought about it. Many folks (myself included) upset the poor guy by telling him that it was a colossal hunk of monkey droppings. Everyone talked about how bad they were, and this poor guy was pretty depressed. Finally, the big day arrived and the knife showed up. Out the box the knife was fantastic and gorgeous, and everything he'd hoped it was, and I told him I was glad to be proven wrong. After all, a good knife is a good knife, regardless of what name is on it right?
A week later he updated the thread and mentioned that the darned thing just about fell apart in his hands, and after a week's use it looked like it had been in a war zone. I felt terrible for the guy, but the nice thing about forums is it gives you the chance to ask before you buy!
Back on track, what are the Kutmasters like? I always thought they were monkey droppings as well?
Def
-
The Kutmasters aren't bad at all really,they are a little clunky compared to other companies offerings.The knife blade on the one I own,is a bear to bring up to a good edge.Certainly no fragile feel to these solid brutes.
-
Thanks... while I am not above buying the odd cheapo, I rarely if ever go out of my way to pick one up. No Kutmasters are available locally, but maybe I might tack one on to an order somewhere else to try out sometime.
Def
-
I will not usually buy junk. Perhaps someday someone like leatherman will make a tool with the shooter in mind. The kutmaster multi shooters tool looks really cool. I have no experience with kutmaster but I have not heard any great things about them. Maybe leatherman will make such a tool. Victorinox would make a great shooters tool but I doubt it will ever happen. Perhaps I will try to mod a SOG to fulfill my needs.
-
Best to seperate that question about Kutmaster quality into two parts; quality of construction, and quality of design.
The construction of the Made in USA multitools is rock solid. The plier handle and jaw is a single piece of forged steel. The handle is formed from a heavier gage of sheet metal than even the old Leatherman tools were. The assembly is rather simple, not a lot to go wrong. The end of the handle has a hex bit driver. Spare bits are carried in the sheath.
However, the design of the Kutmaster tools are definitely dated. They haven't changed a thing in over ten years. A massive lug in the plier handle engages a a slot in the pivot of the knife blade, locking it open. (But only if you maintain pressure on the plier handle.) The file and other blades lock open the same way. All of the blades are heavy and massive, which can be a good thing or a bad thing, depending.
It's a whole lot less sophisticated than any tool currently offered by SOG or Gerber or Vic or L'man.

-
I don't know if this was already discussed, but I came across a shooters tool called the MK16 Combo Tool from www.cjweapons.com
Looks decent, but geared towards rifles.
-
@Defender said:
Not to go too far off topic and into a whole "I hate S&W" rant...The Smith & Wesson Tool Chest II actually has pretty darn good reviews on Amazon.com : http://www.amazon.com/o/ASIN/B0000DD486/
5 out of 5 stars (7), 4 out of 5 stars (1), 3 out of 5 stars (1)One guy even goes so far as to say "So in order This tool is #1 (so far), My SOG was #2 with the Leatherman a very very close 3rd, and the Gerber a not at all close 4th."
The design looks similar to the design of the Bear Jaws. The Phillips driver doesn't look right but it has an integrated bit adapter. Has anyone actually used this tool?


-
@665ae said:
I don't know if this was already discussed, but I came across a shooters tool called the MK16 Combo Tool from www.cjweapons.comLooks decent, but geared towards rifles.

Holy bankrolly! $125.00 seems pretty steep. That is one very unique looking tool though.
-
@supratentorial said:
The design looks similar to the design of the Bear Jaws. The Phillips driver doesn't look right but it has an integrated bit adapter. Has anyone actually used this tool?I've got a S&W Tool Chest II. It is made in China. Quality is so-so; not as bad as the really junky junk, but not nearly as good as anything made in North America or Europe. You are correct, the phillips screwdriver is almost unusably bad. I can't imagine someone preferring this tool over a SOG.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login