Multitool TLC
-
Since this thread is fresh in my mind, I thought I'd also post a quick summary of cleaning methods for future readers.
This is just off the top of my head, so please excuse any ommissions:
Cleaning:
-
Most people either use WD-40, or water with some sort of soap.
-
For cleaning utensils, people often use rags, toothbrushes, q-tips, & toothpicks
-
Special cleaning methods include:
- Blowing out dirt with a can of compressed air
- Sticking blue tac inside grooves to picks up little bits of dirt, etc.
- Using unwaxed dental floss to clean inside joints of pliers and tools
- Putting SAKs and Vic MTs in the dishwasher
- Opening & closing joints under running water, or while swishing the tool around in water
-
Drying is extremely important. Some people leave the tool opened to air dry. Some use a hair dryer or something similar.
-
-
@max6166 said:
Anyway, the majority seem to favour WD-40 or oil of some sort. Is coating the entire tool really necessary? Doesn't it make it greasy and slippery?I've never done extensive testing or anything, so I can't really say what's entirely necessary. But... I've been using WD-40 for serious cleaning and 3-in-1 for general lube. I just put a small drop on most of the pivots and work it in a bit. Sometimes I wipe some on the blades/tools, but not much. When I'm done I wipe the whole thing off with a cloth (just cut up t-shirts...). It doesn't seem slippery or overly oily to me, though the next couple of times I use the tool I might notice a little oil seeping out. I usually go a while between cleaning/lubing, so that doesn't bother me too much.
-
-
-
-
-
-
I'll be honest. I don't really do much cleaning on my multi tools. I sharpen the knife if it gets dull. I haven't oiled the Pulse in I don't know how long. I oil the blades on the Wave every once in a while with some FP-10 gun oil.
I've used carb & choke cleaner to blast out grit before, or just over-oil the joint and work the pliers for a while. ALl kinds of black stuff comes out every time I do that.
-
I just soak them in warm soapy water over night and then using either a pick or toothpick and pipe cleaners. I get the yucky stuff out.
Using a combo of M3 pads or steel eraser and paste.
But for oil I use olive oil on the pivots and blades. That way when one cuts food they don't get the WD 40 taste.
-
I have found that Buck honing oil cleans up LM diamond files like new!
-
-
I haven't tried RemOil..
I try to stay away from any oils in my multi-tools as they attract gunk.. I use dry film lubricants like Tuf Glide. Tuf glide is waterproof, it doesn't attract gunk, and it lasts a LONG time! Not to mention that it basically seals the steels pores so it makes it have a much better rust resistant finish. I would never use anything else! -
@Leatherman123 said:
I haven't tried RemOil..
I try to stay away from any oils in my multi-tools as they attract gunk.. I use dry film lubricants like Tuf Glide. Tuf glide is waterproof, it doesn't attract gunk, and it lasts a LONG time! Not to mention that it basically seals the steels pores so it makes it have a much better rust resistant finish. I would never use anything else!YAY Tuf Glide user!!!
I bought a little tuf glide kits for my edc bag...good stuff!
-
-
Here's the kit I have: http://www.denverdiscoun[url=http://forum.multitool.org]multitool[/url].com/KNIVES/KNIVES---ACCESSORIES/MOSS91200.html
An excellent price indeed!

-
I am sold on using an ultrasonic cleaner for the chore at hand. I recently sold my old ultrasonic cleaner and just ordered a new one that appears to have a big enough s/s tank for a MT or knife with out dis-assembly 2.5 Liter Ultrasonic Cleaner. This model was recently on sale for $72 with FREE shipping and a $10 gift card, so I ordered one. The previous one that I owned I had to disassemble the item to be cleaned and put the pieces in the small tank, which was not always possible because the size of the parts would not fit in the tank. With the new one I believe I will be able to do riveted models and others that can not be taken apart in the s/s tank. Once I test the new model there will be a detailed post here, the unit should be here next week, I hope as I have a couple used SOG Toolclips and other MT's as well as some knives and other metal parts to clean.
-
@Leatherman123 said:
Here's the kit I have: http://www.denverdiscoun[url=http://forum.multitool.org]multitool[/url].com/KNIVES/KNIVES---ACCESSORIES/MOSS91200.htmlAn excellent price indeed!

That's the one I have

Great lil item!
-
I have been using similar methods. Mostly nylon brushes,and compressed air. The only thing I do that I have not yet read about is Contact cleaner. The kind used in electrical trades. Designed to dissolve dust and grime. Evaporates very quickly. End with light machine oil applied with pinpoint applicator. I have been wondering how to remove small scratches. Great thread!
-
@eodtech said:
I am sold on using an ultrasonic cleaner for the chore at hand. I recently sold my old ultrasonic cleaner and just ordered a new one that appears to have a big enough s/s tank for a MT or knife with out dis-assembly 2.5 Liter Ultrasonic Cleaner. This model was recently on sale for $72 with FREE shipping and a $10 gift card, so I ordered one. The previous one that I owned I had to disassemble the item to be cleaned and put the pieces in the small tank, which was not always possible because the size of the parts would not fit in the tank. With the new one I believe I will be able to do riveted models and others that can not be taken apart in the s/s tank. Once I test the new model there will be a detailed post here, the unit should be here next week, I hope as I have a couple used SOG Toolclips and other MT's as well as some knives and other metal parts to clean.Whatever came of this? Does the cleaner work well for multi's without dissasembling them?
-
Here's the kit I have: http://www.denverdiscoun[url=http://forum.multitool.org]multitool[/url].com/KNIVES/KNIVES---ACCESSORIES/MOSS91200.html
An excellent price indeed!

That's the one I have

Great lil item!
Incredible what the can do these days.

-JS
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
