Been doing some work in the Wiki
-
Thanks for the nicely summarized feedback on this topic kamakiri

-
@kamakiri said:
I have a theory that the actual 50 Master Craftsman knives ordered by NASA in '78 were the fish scaler version. #5044 (US) referenced in the NASA letter may cross reference the 1.47 93 version.The book by Derek Jackson (pages 183-185 in the third edition; other pages in older editions) has a nice story about one of these SAKs getting used on a 1983 mission. It includes the attached image of the actual SAK.

-
Looks 5 layers to me. Also apparent Letter confirms #5044...fascinating story



-
I've seen the documents and pictures. I'm just not sure that the original 50 ordered were used on the '83 mission. Say they originally ordered the 6 layer knife and somewhere in-between NASA thought to ditch the fish scaler for weight savings. When the knife is (re)issued circa '86, it was given a new name to celebrate the actual model used in space. The main support for the theory is that the 5 layer version isn't seen in any of the US printed catalogs available from that time. Would be nice to find the #5044 link.

-
@Max Stone said:
Thanks for the nicely summarized feedback on this topic kamakiri
You're welcome! I did forget to add...that the easiest way to check the date would be to pop off the scales. (Not that I recommend doing it) They should both be stamped and dated underneath. And the 1.0mm liner might be able to tell wether it's from the earlier or latter end of that '87-'91 range.
-
I may do that when it arrives. I’ve found with a gentle warming I can pop of the scales without damaging the bosses.

-
In case anyone can get some more dating info from this:
- Boxed as an "Astronaut",
- "82" stamped on bottom of the box.
- all tools opened, so no chisel or hook
- VICTORINOX tang stamp (all letters same height)

-
@Mechanickal said:
In case anyone can get some more dating info from this:- Boxed as an "Astronaut",
- "82" stamped on bottom of the box.
- all tools opened, so no chisel or hook
- VICTORINOX tang stamp (all letters same height)

Looks c. late '85/early '86. I don't think I see a bevel on the awl toward the tip, but a shot of the awl closed could confirm. Still the white flocked/felted liner in the box?
@Reinier said:
You should never damage a boss, it's bad for your career.
-
Still not sure if #5044 the six layer 'Master' Craftsman. It may be 'tied' to that Master Craftsman name for both 5 and 6 layers. Later, in the mid- '80s, late six layer and the first pliers Craftsman both appear to be #5020 in different catalogs. Space Shuttles appear to have #5049, just to add to the confusion.
-
Just noticed that the Spartan page in the Wiki has reached 100,000 hits
It's the 14th most visited page
-
That’s impressive!

-
I have so many pictures of saks that are NOT (yet) on sakwiki....I have registered and tried to figure out how to add some photos but I cannot seem to get it to work. anyone want to tell me how or where is a simple place to learn? I tried the practice area and that wasnt working for me either!
particularly on the Wenger side I have a lot of things to share that are not there
thank you in advance
Dave Arnold
-
Hi Dave,
You need to be registered as an editor - Not a regular user
If you are not an editor please send an MT.o PM to Chief editor enki_ck - To request editorial access - We use our MT.o IDs in the Wiki for ease of identificationPlease look at the gallery and sub-gallery structures
I know you have lots of old Wengers - So if we need a new, say - 'Vintage' gallery or sub-gallery let me know and I can create oneWhen you have access
Go into the appropriate gallery and sub-gallery from the menus on the right hand side of the screen - Last column under Pic
Then use this function to upload imagesWe have not quite got a formal image naming convention going - But try and fit in with what you see in the galleries - ie *'(Manufacturer) Model - Other Details' *
Let me know if that makes sense and if you need more info/help
-
Revised the Artisan page to include the Craftsman and 136ka name/number in the description. I hope this maintains the current use and reference to the name 'Artisan' while respecting the actual historic naming and numbering of this knife.
New (version 20):
The knife commonly known as the 'Artisan', (and also known as the: Fieldmaster - small), was originally named Craftsman and numbered 136ka for decades before the name was reused for the 91mm 6-layer versions circa 1973. It is an 84mm Victorinox knife with 4 tool layers and the same basic tool selection as the larger 91mm Fieldmaster.
Old:
The Artisan, (also known as the: Fieldmaster - small), is an 84mm Victorinox knife with 4 tool layers and the same basic tool selection as the larger 91mm Fieldmaster. There is little known about this model, so it may have only been produced in smaller numbers or in specific markets.
-
@kamakiri said:
Revised the Artisan page to include the Craftsman and 136ka name/number in the description. I hope this maintains the current use and reference to the name 'Artisan' while respecting the actual historic naming and numbering of this knife.
........Hi KK (and Knights)
Following our discussion on this topic in the Craftsman Love page - This update was on my do list – But you beat me to it ! :)
I was actually going to do it this weekend! .... Really !!!However, I was planning a slightly different approach to what you have done.
Also, I don’t think that we can say the Artisan was called the Craftsman* "for decades before the name was reused for the 91mm 6-layer versions"* given the back spring Phillips only came out in ’52 and the Craftsman we believe was born in 1973!
So the maximum it could have been is two – Which I don’t think counts as "....for decades ....." !!I was planning to add a*** Name Disambiguation*** section - in common with other Wiki pages where we have duplication / confusion over names.
So my update would have looked like this – The red texts would be hyperlinks to the appropriate pages.
I was not sure about putting the old model number in the top section, as shown here – Or just in the identification section at the bottom
– Preference I think I is the latter - and probably also in the History section !!
I would also edit the History section a bit as it too talks about the name switches.The Artisan (old style model number 136ka) is a four-layer 84mm Victorinox knife with and the same basic tool selection as the larger 91mm Fieldmaster, and is also known as the Fieldmaster – Small.
**Name Disambiguation:
**The French word ‘artisan’ when translated into English is ‘craftsman’ and this name was historically used for this model, at least in the US market (see this catalogue).
In approximately 1973 the Craftsman name was re-used for the six-layer 91mm Craftsman.
This naming may also explain why the Master Craftsman is smaller than the current Craftsman – As it is larger (size and layers) than this model..I was also planning to put an equivalent update to the Craftsman and Master Craftsman pages
Let me know what you think folks
-
'40s, '50s, '60s, '70s...decades. I think just the proposed name disambiguation is missing the point a bit. Look at JB's post again...the knife is originally a Craftsman numbered 136ka. Otherwise the whole page should be renamed 'Craftsman 84mm' or something like that, and relink all the relevant pages. I think that would be more confusing considering how things got here.
-
Hi KK
I was editing this post in flight - a couple of time - as I was checking things out/proof reading - So how it reads now may not be how your read it when you replied - Apologies for that
The back spring Phillips came out in 52 - Right? The six layer Craftsman came out in 73 -
So if we assume that the 84mm Phillips came out at the the same time as the 91mm Phillips - The maximum it can have been is 21 years - I make that two decades !Please can you explain what point is the name disambiguation section missing - I am not clear on this
Also - Are you sure that back in the day - the 136ka was called a 'Craftsman' in the German/French speaking country of Switzerland - It's just the English translation of the name .... right??
Also back in those days the numeric numbers were the main identifier - Correct ?
I don't think we should be re-organising the Wiki around English translations of Swiss names - or US catalogues - When we know importers/dealers quite often mucked around with the names ! At least before the names got stanardised mid 70sI think like you said in the Craftsman thread - It would be really good to see a catalogue of the 136ka with another name - eg Artisan !!
Also please can you tell me to which JB post you are referring

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login