Bustin' out the traditionals, a 30-day challenge
-
@zrxoa1 said:
I was doing some work cleaning up my work room in the basement today. Came across this old knife. No idea where I got it, or when. No clue what it even is.Pretty rough shape. Soaked it in some hot soapy water and worked the blades in and out while under water. Took an old tooth brush to it.
Rinsed and oiled and tried to wipe out all the gunk. Sharpened and stropped all three blades.
Still rough. Still a little gunk build up. But all three blades are sharp. One has a broken tip. I’d say the knife has been used hard. Not really taken care of.
A few pics below. I’ll use it some during the challenge next month. Keep using it and washing every so often. Wish I had a sonic cleaner.





After quickie spa treatment...





Sent from my iPhone using Tapatalk
Lovely stockman!

-
@gerleatherberman said:
Test driving a vintage Case Jack for Sunday in preparation for the challenge. :)


What a beautiful selection... that sideclip though!

-
@Fuzzbucket said:
Four of us!

-
@zrxoa1 said:
I was doing some work cleaning up my work room in the basement today. Came across this old knife. No idea where I got it, or when. No clue what it even is.Pretty rough shape. Soaked it in some hot soapy water and worked the blades in and out while under water. Took an old tooth brush to it.
Rinsed and oiled and tried to wipe out all the gunk. Sharpened and stropped all three blades.
Still rough. Still a little gunk build up. But all three blades are sharp. One has a broken tip. I’d say the knife has been used hard. Not really taken care of.
A few pics below. I’ll use it some during the challenge next month. Keep using it and washing every so often. Wish I had a sonic cleaner.
After quickie spa treatment...
Sent from my iPhone using Tapatalk
Nice job cleaning up that old stockman

-
as well

-
@PitCarver said:
ReadyLovely GEC Whittler.
I have a Wrangler on that same frame. Wish GEC would make some more of those 57's@gerleatherberman said:
Test driving a vintage Case Jack for Sunday in preparation for the challenge. :)


Nice Case Jack!
How vintage is it? -
Day 0
Welcome to this Summer’s 30-day Traditional Knife challenge!
Barry and I hope you guys will have a lot of fun with this challenge, while enjoying a safe and happy Summer. Already some heat records have been broken, so stay hydrated and stay cool!
During this 30-Day challenge, we are going to run a few “In-Challenge Challenges”. These are strictly optional and just meant to add a little extra fun and conversation to the challenge thread. Please don’t nobody take ‘em too serious. (But there will be prizes…..)
So, now to our first In-Challenge Challenge. (Yes, I know, the 30-day challenge doesn't start until tomorrow, but we wanted you guys to have time to plan and participate in this one.)
ICC #1: Fourth of July Challenge:
Barry and I are both HUGE fans of the Forth of July. Maybe it’s the fireworks, maybe it’s the history of the day, maybe it’s just the national heartbeat of patriotism, or maybe it’s all those BBQ’s on a Summer's day….. Whatever the reason, we love the tradition of celebrating our national birthday and hope you will join us in the celebration!

Here’s the challenge:
Post a picture of your Traditional knife being used in a celebratory meal on the 4th of July.

Americans love to BBQ or grill on the fourth of July, so a snap of your trad with a hotdog, bratwurst, or hamburger would be especially welcome, but, even if it’s just a salad, post that shot with your traditional knife on July 4th. Oh, and in your post, please give our Uncle Sam a shout out for his birthday!
From a list of those who enter the Fourth of July Challenge, I’ll randomly select a winner to receive a prize (yeah, Barry, you are eligible to play, too. I better see a good BBQ shot from you, buddy...
).The prize:

A Vic pocket sharpener and a bottle of spicy mustard sauce, sure to keep that BBQ knife sharp and put some fireworks on your next hot dog or bratwurst! -
@Fuzzbucket said:
What a beautiful selection... that sideclip though!
Many thanks, Fuzzy!

It was a labor of love to polish that one. :)
Thank you, David!

It is a 1972 Case Jack. :)
-
Welcome to this Summer’s 30-day Traditional Knife challenge!
Barry and I hope you guys will have a lot of fun with this challenge, while enjoying a safe and happy Summer. Already some heat records have been broken, so stay hydrated and stay cool!
During this 30-Day challenge, we are going to run a few “In-Challenge Challenges”. These are strictly optional and just meant to add a little extra fun and conversation to the challenge thread. Please don’t nobody take ‘em too serious. (But there will be prizes…..)
So, now to our first In-Challenge Challenge. (Yes, I know, the 30-day challenge doesn't start until tomorrow, but we wanted you guys to have time to plan and participate in this one.)
ICC #1: Fourth of July Challenge:
Barry and I are both HUGE fans of the Forth of July. Maybe it’s the fireworks, maybe it’s the history of the day, maybe it’s just the national heartbeat of patriotism, or maybe it’s all those BBQ’s on a Summer's day….. Whatever the reason, we love the tradition of celebrating our national birthday and hope you will join us in the celebration!

Here’s the challenge:
Post a picture of your Traditional knife being used in a celebratory meal on the 4th of July.

Americans love to BBQ or grill on the fourth of July, so a snap of your trad with a hotdog, bratwurst, or hamburger would be especially welcome, but, even if it’s just a salad, post that shot with your traditional knife on July 4th. Oh, and in your post, please give our Uncle Sam a shout out for his birthday!
From a list of those who enter the Fourth of July Challenge, I’ll randomly select a winner to receive a prize (yeah, Barry, you are eligible to play, too. I better see a good BBQ shot from you, buddy...
).The prize:

A Vic pocket sharpener and a bottle of spicy mustard sauce, sure to keep that BBQ knife sharp and put some fireworks on your next hot dog or bratwurst!
& 
An early Happy 4th to you as well, Nix!

-
Just to add to some more fun to the challenge I will be giving away this Craftsman small Jack knife. I will pick someone randomly out of the participants of the challenge including those who aren't in it but take the time to comment or post in the thread. I'm thinking probably after the end of the second week .
Let's say Sunday the 14th

Craftsman made by Ulster knife co.

-
That's awesome, Steve!

-
@gerleatherberman said:
Thank you, David!
It is a 1972 Case Jack. :)
An eight dot. I have an eight dot 6392 I bought at Bryant Hardware Store. Carried that knife for years. Its mostly retired now days. Its earned it. :D
-
That is a gorgeous looking knife very generous of you Steve

-
This is starting to look like The Challenge of the year to be a part of!
to Steve and Nix!Sent fra min FRD-L09 via Tapatalk
-
Thanks to those pointing out that old knife I found is a stockman. Never heard of that before. Did some looking up on Google.
No idea of the brand. Most likely just some old cheapie dimestore seller.
However, it’s going to get used. I’m not interested in trying to polish it all up and make it pretty. I’m just going to use it. Keep oiling it up and working the remaining gunk out of the pivots.
I think I’ll make it my work beater next month. Drop it in my pocket and head to work each day.
I’ll use my JE Made for weekends and non work days.
Try to bring some useful life back to that old stockman knife.
Sent from my iPhone using Tapatalk
-
@zrxoa1 said:
Thanks to those pointing out that old knife I found is a stockman. Never heard of that before. Did some looking up on Google.No idea of the brand. **Most likely just some old cheapie dimestore seller. **
However, it’s going to get used. I’m not interested in trying to polish it all up and make it pretty. I’m just going to use it. Keep oiling it up and working the remaining gunk out of the pivots.
I think I’ll make it my work beater next month. Drop it in my pocket and head to work each day.
I’ll use my JE Made for weekends and non work days.
Try to bring some useful life back to that old stockman knife.
Sent from my iPhone using Tapatalk
You know, I'm not so sure about that, judging by how well put together the backsprings are and the fact that all the blades have swedges - it looks like reasonably well made usable knife.
What do other more qualified members think? -
with FuzzyHard to say who made it but some of the big companies like Camillus did make some unbranded knives. It's not shell construction and it has brass liners so that points to a better knife than most of the cheapies.
I'm sure it has good steel in the blades

-
Been carrying these two for a while now but the time has come to put them away

So day 0 and my carry for the next working month, the Grohmann, and i will also take the Gerber along for backup in case i need other tools, neither of which i have carried till today although i have had them for ages, been a long wait but i'm good to go


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

