Economy/Ecoline Owners Club: Show us yours!
-
I find it so interesting that two of the three SMICO Canada series VSAKs were "Economy" branded and the third was not. Wonder what their thinking was on that one....
I've also seen the Spartan/"Hiker" knife in this series with Elinox tang stamp and no "Economy" stamp on the obverse.


-
@MiniChamp said:
Cool find!
It should be from around 2004-2005, because the main blade has the old style tang stamp with a crossbow on a 2.0mm thick tang, as shown in the following image:It's an interesting SAK, because the Handyman wasn't usually available in an EcoLine version. Also, the model number that is written on the box is quite strange. An EcoLine Handyman should be just 3.3773, but this one is 5V3.3773. Maybe it's something that was made specifically for the Dutch market.

Can you check if the liner near the corkscrew is anodized? "Real" 91mm EcoLine SAKs lack any anodized liners, whereas the liner near the corkscrew is anodized in the regular line. I'm curious about this one. Thanks!
Thanks for your feedback!!
I think the liner is not anodized. Must admit: I can't see a clear difference between anodized and not anodized. That's my own total lack of any technical knowledge! One could say the knife is the Handyman, not me...

Maybe the two close-up pictures can be helpful to you. -
OK here we go with the first set of SAKs.
2 pics of the 84mm SAKs from the ECONOMY line :1 2.05.00 with ECONOMY stamp on the main blade
2 2.06.00 with ECONOMY stamp on the main blade
3 2.06.00 with +crossbow OFFICIER SUISSE on the blade
4 2.25.01 with +crossbow OFFICIER SUISSE on the blade
5 2.38.00 with +crossbow OFFICIER SUISSE on the blade
6 2.38.01 with +crossbow OFFICIER SUISSE on the blade

-
OK here we go with the second set of SAKs.
2 pics of the 91mm SAKs from the ECONOMY line :1 3.36.00 with ECONOMY stamp on the main blade
2 3.36.00 with no stamp on the main blade
3 3.36.01 with +crossbow OFFICIER SUISSE on the blade
4 3.36.10 ELINOX with no stamp on the main blade
5 3.36.11 with +crossbow OFFICIER SUISSE on the blade
6 ? with +crossbow OFFICIER SUISSE on the blade

-
Now I'm gone look for the ones with the nylon scales

-
@EMZ said:
I think the liner is not anodized. Must admit: I can't see a clear difference between anodized and not anodized. That's my own total lack of any technical knowledge! One could say the knife is the Handyman, not me...
Maybe the two close-up pictures can be helpful to you.Thanks, but I cannot tell from these pictures. The kind of pictures from which one can usually tell are pictures of the back of the SAK that are taken with a cellular phone using the flash (at some mild angle). The point is that non-anodized liners are mirror-like and reflect light only in certain directions, whereas anodized liners scatter light in all directions. Hence, the very directional light from the cell phone led flash lets you see the difference. I attach an image of the back of a cybertool 29 showing this effect. The cybertool 29 is special in that it has two different liners touching each other (the anodized one and the thick one right next to it). You can see that the non-anodized liners reflect light similarly to the springs separated by them, whereas the anodized liner looks very different.
Another way is to check electric conductance. Non-anodized liners are excellent conductors whereas undamaged anodized liners are essentially insulators (they should have measured resistance in the range of megaohms).

-
OK here we go with the third set of SAKs.
SAKs with nylon scales :1 - 5 84mm
6 - 8 91mm5 2.3803
6 3.3613

-
@MiniChamp said:
Thanks, but I cannot tell from these pictures. The kind of pictures from which one can usually tell are pictures of the back of the SAK that are taken with a cellular phone using the flash (at some mild angle). The point is that non-anodized liners are mirror-like and reflect light only in certain directions, whereas anodized liners scatter light in all directions. Hence, the very directional light from the cell phone led flash lets you see the difference. I attach an image of the back of a cybertool 29 showing this effect. The cybertool 29 is special in that it has two different liners touching each other (the anodized one and the thick one right next to it). You can see that the non-anodized liners reflect light similarly to the springs separated by them, whereas the anodized liner looks very different.Like this?
To me the liners aren't anodized. -
@MiniChamp said:
Yes! Thanks!
It looks like you have a real EcoLine Handyman (no anodized liners). Very cool! 
YES! And many thanks for your help.

-
Not very common Spartan serrated with nylon scales

-
Two SMICO "Hiker" SAKs, one with "Economy" tang and the other with "Elinox." It's interesting to note that the corkscrew on the Elinox knife is smooth. This is correct for this vintage, as Jazzbass pointed out in this thread: /topic/63268



-
Looked like this thread could do with a bump
Very fond of the nylon scales found on the ecoline and 111’s SAKs



-
This thread definitely needed a bump. And it needs more blue.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

