Analysis Paralysis
-
nope, i have a charge al :D but if you found those functions very important and dont plan on getting another multi(yet
) then go for the SURGE 
-
If you like the SOG anyway, being able to customise the tools is a real bonus. At least you get a choice and not just the fixed tool compliment like most other brands.
Oh, and welcome to the form :)
-
been agonizing over this for a week or two.
think I'm gonna go for the powerassist, but with saw, slotted + opener, phillips, 1/4 drive, and the file.
that should all fit with appropriate clearance, and I can carry a little 1/4 to 1/4 adapter to drive the LM bits (and a couple full hex bits for larger sizes).
as for not getting another multi, I figured that no matter what I chose for #1 a crunch was going to be #2, vise grips are excellent.
-
I've been thinking about powerassist as well, but loosing 4 inner implements just isn't worth it to me. Regard the assissted blades, I have a few assissted kershaws and while they are fun to play with, I always end up going back to carry non-assissted knives.
-
the assist on the blades, to me, isn't a draw at all.
but the convenient access is, and I'm not turned off by the assist either, I'm sure i'll enjoy it's geek factor.
-
Ended up going a fairly different route!
Skeletool CX clipped to pocket, 91mm Vic Compact on my Keychain, and a SOG Powerlock in my backpack, along with a squirt E4 and a LM Bit Kit + Bit Extender.
covers all my bases, and I get the added benefit of only having to pull out a friendly red SAK for small jobs. (I'm a student).
I'll probably pick up a crunch for pack carry later on, then I'll really be stylin :sak:
-
Sounds like a great set up

-
Welcome to the forum

And great choices you seem to have made as well :D Hope that they help you out in your day to day stuff

-
IMHO, compound leverage is ALL that's going for the powerlock...(yes I own one DaveK)
BTW, SURGE all the way!
-
I would probably agree, the powerlock is extremely clunky to use (and with the tool access scheme as it is, I can't really see how the piano locks would make it more rather than less convenient to use), but, having said that..
I feel much better having a powerlock vs not, since doing it this way allows me to keep my at hand stuff a bit lighter and tighter with the skeletool + sak (rather than pocketing or belt carrying a surge), while still having the extra tools and mucho pliers there as a backup in my bag. (and a non bit based phillips has already come in handy for recessed screws on an air cleaner)
-
also the "compound leverage" gives you a decent grip is all...it can't take much torque due to the weak chicago screws and the extra amount of moving pieces...you want have trouble with the SURGE as far as gripping/cutting goes...
-
@rockyman500 said:
also the "compound leverage" gives you a decent grip is all...it can't take much torque due to the weak chicago screws and the extra amount of moving pieces...you want have trouble with the SURGE as far as gripping/cutting goes...How many of the powerlock "weak chicago screws" have you broken so far? Just curious because I have put some serious torque on a powerlock with no problems.
-
I haven't broke it...but it flexes pretty easily and is absolutely dwarfed by the SURGE's screws...
-
same with the rest of the tools...they just flex to easily in my experiences...even the 1/4 in. bit driver (which is thickest) flexes like plastic under some rather heavy torquing...the SURGE does also, but it takes WAY more force to make it flex...
-
also the "compound leverage" gives you a decent grip is all...it can't take much torque due to the weak chicago screws and the extra amount of moving pieces...you want have trouble with the SURGE as far as gripping/cutting goes...
How many of the powerlock "weak chicago screws" have you broken so far? Just curious because I have put some serious torque on a powerlock with no problems.
same here
actualy i only trust the powerlock plier for heavy duty work
-
also the "compound leverage" gives you a decent grip is all...it can't take much torque due to the weak chicago screws and the extra amount of moving pieces...you want have trouble with the SURGE as far as gripping/cutting goes...
How many of the powerlock "weak chicago screws" have you broken so far? Just curious because I have put some serious torque on a powerlock with no problems.
same here
actualy i only trust the powerlock plier for heavy duty work
so, that's the only tool you trust for heavy duty or you only trust the pliers for heavy duty?
I'm sure I'm gonna get a lot of heat from you SOG guys but...
The other tools are all so thin, the phillips is like jello! ...and the main blade...don't get me started on it... -
I used to have a SOG and other than the pliers going bad I thought it was a great tool.
-
also the "compound leverage" gives you a decent grip is all...it can't take much torque due to the weak chicago screws and the extra amount of moving pieces...you want have trouble with the SURGE as far as gripping/cutting goes...
How many of the powerlock "weak chicago screws" have you broken so far? Just curious because I have put some serious torque on a powerlock with no problems.
same here
actualy i only trust the powerlock plier for heavy duty work
so, that's the only tool you trust for heavy duty or you only trust the pliers for heavy duty?
I'm sure I'm gonna get a lot of heat from you SOG guys but...
The other tools are all so thin, the phillips is like jello! ...and the main blade...don't get me started on it...pliers mostly, for everything else i prefer the swisstool :) although the swisstool pliers are heavy duty as well i fell like i got a better grip with the powerlock ::) as long as whatever im griping is not to big :-[
-
also the "compound leverage" gives you a decent grip is all...it can't take much torque due to the weak chicago screws and the extra amount of moving pieces...you want have trouble with the SURGE as far as gripping/cutting goes...
How many of the powerlock "weak chicago screws" have you broken so far? Just curious because I have put some serious torque on a powerlock with no problems.
I'm curious to hear why you would regard them as weak as well? I haven't heard of a single case where one as broken.
-
also the "compound leverage" gives you a decent grip is all...it can't take much torque due to the weak chicago screws and the extra amount of moving pieces...you want have trouble with the SURGE as far as gripping/cutting goes...
How many of the powerlock "weak chicago screws" have you broken so far? Just curious because I have put some serious torque on a powerlock with no problems.
I'm curious to hear why you would regard them as weak as well? I haven't heard of a single case where one as broken.
because they're undersized and flex like plastic...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login