30-day axe challenge
-
It's a bit trickier to use an axe head without a handle than I thought. I planned on using the head on it's own during the challenge--a few bonus points for versatility--but we'll see how that goes.
The head arrived with a useful edge, but I have not given it a final sharpening yet.
.....which might have been a good idea to follow through on* before* trying to use it as a carving tool.......
-
@Fuzzbucket said:
Have you got a small plane like a little stanley or something? Might be quicker using that to rough it out.I do have a couple of planes. They might be great, but I've been using the draw knife and spokeshave. The spokeshave seems to be a good choice, but is a bit slow (which isn't a bad thing). I resharpened the spokeshave's blade, but as a result he set up isn't quite as good as I had it before. It's a fiddly little shave, and I can never get it set up the same way twice......
-
Fuzzy, have you made a mask or sheath for Fuzzaxe yet?

Lyndax is going to get a set of smart leather pants. Once I get her hung and well hafted.

-
@Nix said:
Fuzzy, have you made a mask or sheath for Fuzzaxe yet?
Lyndax is going to get a set of smart leather pants. Once I get her hung and well hafted.

I do believe an *Arrooooga! *is appropriate here...

Yes, I am going to make a mask!
Actually, I'll have to anyway as I want to belt carry Fuzzaxe from time to time and he's a bitey wee smurf (he's already drawn blood - watch that beard tip!). It's got such a slim profile, I'm hoping it can simply be slipped into (under) my belt. I've got some reasonably thick waxy hide here and an assortment of rivets etc, so I'll take the lot up with me next time I'm oop north. -
Nice.
I haven't settled on a design yet....but something will come to me. I'm going to want to carry it either in or strapped to a pack/bag.

-
@Fuzzbucket said:
I don't mean to BRAG, but it only took me a couple of hours to knock up my handle (and it's got a flatter more challenging profile).... (Insert general smugness here)...

Wait, you're bragging about that puny thing
? tis but a twig compared to my 700mm handle! 
You also had the benefit of having a factory fitted handle to copy, unlike Nix and myself who are starting from nothing! I beg to differ, good sir, that the flatter handle on yours is vastly easier to make than the curved profile you have inflicted upon us! You probably don't have a dog constantly wanting you to throw the ball for him every 5 seconds either?

(all above in jest, of course)I do have one of those surform rasps but it was easier to use the plane and provided you're going with the grain and not getting tear out, the finish should require no to minimal sanding. My bench vise is also in a bit of a poor spot for access at the moment (ie there's too much smurf on and around my bench!
) All up so far I've probably spent about 4 hours total. Hard to say with doggy interruptions! -
@Nix said:
It's a bit trickier to use an axe head without a handle than I thought. I planned on using the head on it's own during the challenge--a few bonus points for versatility--but we'll see how that goes.The head arrived with a useful edge, but I have not given it a final sharpening yet.
.....which might have been a good idea to follow through on* before* trying to use it as a carving tool.......
It's the catch 22, sharpen and use it to help make the handle, but risk more chance of cutting up yourself at the same time, or keep it "blunter" and use dedicated tools. I wonder with the old trade axes if they would poke a temporary stick handle on there to help use the tool more easily until a proper handle is fashioned?
-
Must have..... ja?
-
@TazzieRob said:
Wait, you're bragging about that puny thing
? tis but a twig compared to my 700mm handle! 
You also had the benefit of having a factory fitted handle to copy, unlike Nix and myself who are starting from nothing! I beg to differ, good sir, that the flatter handle on yours is vastly easier to make than the curved profile you have inflicted upon us! You probably don't have a dog constantly wanting you to throw the ball for him every 5 seconds either?

(all above in jest, of course)I do have one of those surform rasps but it was easier to use the plane and provided you're going with the grain and not getting tear out, the finish should require no to minimal sanding. My bench vise is also in a bit of a poor spot for access at the moment (ie there's too much smurf on and around my bench!
) All up so far I've probably spent about 4 hours total. Hard to say with doggy interruptions!Right... (takes shirt off... pause... puts shirt back on again)...
Yes, but I used an old pickaxe handle, so had to make a curvy thing straight.... you try doing that with just a rusty
surformtwig and an amorous pheasant constantly harassing you!
:D
-
@Fuzzbucket said:
takes shirt off... pause...popcorn:ahhh :ahhh :ahhh

@Fuzzbucket said:
(* puts shirt back on again*)...
-
Day: -83
I would like to tell you that my handle is complete.....
Spoiler:

Spoiler:
But I'm not happy with the final fit and finish.
I got too aggressive with the draw knife and messed up the top section. I think there were some tricky bit of grain up at that end, resulting in tear-out issues, despite trying to use the spokeshave in multiple directions and even skiving with it a bit.
I could live with some of the chip out, but there is a more concerning issue....
While the final handle is functional, there is a gap at the top of the eye (due to that aggressive draw-knife use) that bugs me. Too bad, because the first 3/4 of the handle is rather nice and feels great in hand. And the little bugger did a fine job splitting a log. Still, 'fine' is not quite 'good enough' for this challenge axe. So, it's back to the carving bench......
Live and learn.

-
Looks good to me Nix

-
Maple looks nice.

Reminds me of my bass neck. -
Thanks guys. I think the maple does look pretty good. A bit of a shame I went and left the door open to Mr Cock-up.

Still, it was a good experience and I think I got a good bit of experience from the attempt. I had used that spokeshave in about 12 years or more and feel I am re-learning how to put it to best effect. The tear-out issue continues to worry me, but I think I'll be able to work around that a bit wit the next try.
Good thing we still have 83 days until challenge start.....

-
I would like to tell you that my handle is complete.....
Spoiler:

Spoiler:
But I'm not happy with the final fit and finish.
I got too aggressive with the draw knife and messed up the top section. I think there were some tricky bit of grain up at that end, resulting in tear-out issues, despite trying to use the spokeshave in multiple directions and even skiving with it a bit.
I could live with some of the chip out, but there is a more concerning issue....
While the final handle is functional, there is a gap at the top of the eye (due to that aggressive draw-knife use) that bugs me. Too bad, because the first 3/4 of the handle is rather nice and feels great in hand. And the little bugger did a fine job splitting a log. Still, 'fine' is not quite 'good enough' for this challenge axe. So, it's back to the carving bench......
Live and learn.

Looks good, shame about the gap, better luck next time

I would also like to tell you my handle is complete...... and it kind of is. I just want to bump it another head length up the handle to get the rear part of the eye away from an already existing dip on the top and bottom (a little bit like Nix's problem). Might be visible on some of the photos.
I'm thinking I may even thin it down even more. There's a bit of handle shock when I tested it out on a hard dry piece of wattle
-
Nix, it does look good to me too, but I admire your tenacity. That's the difference between craftsman and artist.

-
Not sure how these look, I dropped my phone today and have internally damaged the screen :'(
Sent from my E5823 using Tapatalk




-
Looks good Tazzie

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login