What Is Your Latest Knife?
-
@FolderBeholder said:
I have always wanted to try an Al Mar, so I bought this 6105 last night, it is in route:Great find FB!

Al Mar makes great knives. I have 4 Al Mar Sere 2000's
-
Thanks, Vic!

-
Wichard Rigging Knife; I think it's the 10052 model. Personally, I would recommend not buying this model for anything more than the ten bucks I paid. Wichard replaced this older model with the Offshore and Aquaterra series. This one seems made OK, but suffers from really cheapo steel. It's 316L; pretty much rustproof but is too soft to hold an edge long, and is not even a steel suited for blades. WIchard discontinued these for good reason; though I still wish the one with pliers was still around; missed out on getting them when West Marine sold it. The lower-end Aquaterra are 420, while the Offshore are Sandvik 12C27. I am thinking about getting the Offshore. This one's going in my tacklebox since it will be used sparingly, and is rustproof. Already made and attached a lanyard for it.

It glows in the dark!

1987 Case 62048 Slimline Trapper with a broken skinning blade backspring. Kind of an accident. An eBay seller had another knife I was interested in (a Western Peanut) up for bid. I set my maximum bid on that, and seeing as no one had bid on the Case with only a 99-cent starting bid, I bid. I lost on the Western, but still got the Case; I didn't complain, as with shipping and the !@#$%^& sales tax, I still had under $5 in it. The snap on the main blade is good. This was during the Parker era, and in my opinion, those are the worst Cases ever made (aside from those Camillus made for Case), so it could be a tempering issue. The knife seems used, but not trashed or abused. I have filed a warranty form with Case. Hopefully it is approved, and I can get it repaired and usable. I can't wait to start toting this one. Case doesn't even make a two-blade Slimline/Utility anymore. A lot less bulky than the normal 54 pattern Trapper. Of course, the MIni Trapper is the best Case "Trapper" pattern in my mind.


-
Nice knives cody

-
-
Thanks, Ron!

-
@eTripper said:
When Al Mar was alive, he was extremely cognizant about the quality-aspect of his brand. These represent the pinnacle of production knives made in Seki City, Japan.
Nice!

@cody6268 said:
Wichard Rigging Knife; I think it's the 10052 model. Personally, I would recommend not buying this model for anything more than the ten bucks I paid. Wichard replaced this older model with the Offshore and Aquaterra series. This one seems made OK, but suffers from really cheapo steel. It's 316L; pretty much rustproof but is too soft to hold an edge long, and is not even a steel suited for blades. WIchard discontinued these for good reason; though I still wish the one with pliers was still around; missed out on getting them when West Marine sold it. The lower-end Aquaterra are 420, while the Offshore are Sandvik 12C27. I am thinking about getting the Offshore. This one's going in my tacklebox since it will be used sparingly, and is rustproof. Already made and attached a lanyard for it.
It glows in the dark!

1987 Case 62048 Slimline Trapper with a broken skinning blade backspring. Kind of an accident. An eBay seller had another knife I was interested in (a Western Peanut) up for bid. I set my maximum bid on that, and seeing as no one had bid on the Case with only a 99-cent starting bid, I bid. I lost on the Western, but still got the Case; I didn't complain, as with shipping and the !@#$%^& sales tax, I still had under $5 in it. The snap on the main blade is good. This was during the Parker era, and in my opinion, those are the worst Cases ever made (aside from those Camillus made for Case), so it could be a tempering issue. The knife seems used, but not trashed or abused. I have filed a warranty form with Case. Hopefully it is approved, and I can get it repaired and usable. I can't wait to start toting this one. Case doesn't even make a two-blade Slimline/Utility anymore. A lot less bulky than the normal 54 pattern Trapper. Of course, the MIni Trapper is the best Case "Trapper" pattern in my mind.


Like that Case!

-
GEC 93
-
nice, you did well!Let's see the other side

-
Very nice David

-
I found this treasure at a pawn shop for $80.00!!

<a href="https://ibb.co/jRwF7g6"><img src="https://i.ibb.co/gVWCszj/Case1.jpg" alt="Case1" border="0"></a>
<a href="https://ibb.co/c8nvtJ2"><img src="https://i.ibb.co/945v2ny/Case2.jpg" alt="Case2" border="0"></a><br /><a target='_blank' href='https://aluminumsulfate.net/ammonium-sulfate'>formula ammonia gas</a><br /> -
Case Sodbuster Jr arrived today.

-
x 3 -
Thanks David, Steve, Ray.
-
Nice knives mikekoz and Sos

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login