Schradetools and Bear Jaws
-
Sheffield? Is that near Usa? South of Beijing?
-
A lot of Japanese stuff used to get bashed. Many of the younger guys here may not believe this, but there was a time when all Japanese manufactured electronics were considered to be garbage. :o
The same thing is happening to China. The current head of the Elsener family (which owns Victorinox) never considered Wenger to be their biggest threat. That wasn't a shot at Wenger, that was recognizing the increasing quality and low cost of the Chinese made knockoffs.
While many of the steels manufactured and used in Chinese plants right now isn't great, I guarantee that will change as well. More and more companies are dismantling US based operations and moving all of their equipment to China. The Chinese plants are using the same machinery, the same materials, and their workers cost nothing, and work long hours, seven days a week. They'll amass the experience of US workers in a fraction of the time as a result, and then, watch out.
Like I said, the crappy Chinese products aren't their fault, it's ours because that is what can be mass marketed here, and we (not us per se, but us "Developed Nations" people) buy them up by the bajillions, especially when it has Smith & Wesson stamped on it...
Def
-
Bump.
-
@Grant Lamontagne said:
(I'm fascinated by Defender's Taylor Cutlery remark)
Oddly, I've an acquaintance who carried a Scradetool all through his Army service and into his current position as an IT tech for a local fiber optic concern. He absolutely prefers the Schrade to any of my other tools. I guess you can get used to anything!
First off, Taylor Cutlery is the epitome of evil in the knife world. They take excellent, well established names and turn them into monkey poo. For example, for a hundred years or so, Smith & Wesson has been a well respected name in the firearms industry. They make good quality products, and still do to this day. Enter Taylor Cutlery, who finds the person at S&W responsible for the trademark and name and backs a dump truck full of money up to their house and says "I'd like to use your name for a line of knives." The S&W guy, dazzled by an honest to God dump truck full of money in his driveway, nods, thinking that knives might be a good way to compliment the gun line.
Armed with the rights to the name, Taylor then goes to China to locate the cheapest, most decrepit factories it can find to crank out the cheapest tactical looking junk they can find, buy a few hundred thousand of them, import them to the US and sell them with "Smith & Wesson" stamped on them. These knives, that they bought for less than $1 each would ordinarily sell at Wal Mart for $15 are now sold at $50 because of the S&W logo. People buy them because of the name association with high quality firearms, and are either disappointed with them and never admit to owning them, have no idea how bad the junk is and show off to their friends that they have a S&W knife (friends of course rush down to Wal Mart and throw money at random employees until they get one too), or are the victims of a horrible accident resulting from the knife folding over the liner lock or failing at some other critical juncture.
This is bad right? Well, it gets worse. When a good old fashioned US knife company like Schrade is forced to close it's doors because people have stopped buying real quality tools in favor of these warped imported pieces of junk, the jackals at Taylor are waiting in the wings, wringing their hands and salivating, hoping to snap up a piece of the corpse before it's cold. In this case, they bought the Schrade name and many (if not all) of the patents and designs, danced for a few moments in the misery of many skilled craftsmen now unemployed, and headed off to China where they could crank out the designs at a fraction of the price by using child labor and materials that resemble steel, all with the eye of making even more money by continuing to sell Schrade tools at the same prices as when they were US made, because people know for a fact that the ST1 was a good quality tool. People like your friend, who owned an original Tough Tool and like it (and why not? It was a well made tool with decent quality components and materials) think it's great and buy more of them for tool loving friends for Christmas, birthdays etc and can't understand why you think it's a hunk of crap. Your friend starts to think you are an idiot because he's carried and used the exact same tool for years without a problem, and yours broke in half and caught fire while cutting a particularly thick piece of cheese.
That's why I hate Taylor and all they do. I expect to hear from their lawyers any time now, and I'll bet they can afford good ones with all of your hard earned money lining their pockets and stuffed into closets in the mansions folks have bought them. As far as I am concerned, if they tried sueing me for saying that, it just proves my point about them being spineless vultures.
A hearty one finger salute to all my friends at Taylor! May you one day be trapped in a sinking submarine, and your only hope of salvation is to cut your way free with your own shoddy products!

Def
He does think like me... :D :o
-
@Grant Lamontagne said:
(I'm fascinated by Defender's Taylor Cutlery remark)
Oddly, I've an acquaintance who carried a Scradetool all through his Army service and into his current position as an IT tech for a local fiber optic concern. He absolutely prefers the Schrade to any of my other tools. I guess you can get used to anything!
First off, Taylor Cutlery is the epitome of evil in the knife world. They take excellent, well established names and turn them into monkey poo. For example, for a hundred years or so, Smith & Wesson has been a well respected name in the firearms industry. They make good quality products, and still do to this day. Enter Taylor Cutlery, who finds the person at S&W responsible for the trademark and name and backs a dump truck full of money up to their house and says "I'd like to use your name for a line of knives." The S&W guy, dazzled by an honest to God dump truck full of money in his driveway, nods, thinking that knives might be a good way to compliment the gun line.
Armed with the rights to the name, Taylor then goes to China to locate the cheapest, most decrepit factories it can find to crank out the cheapest tactical looking junk they can find, buy a few hundred thousand of them, import them to the US and sell them with "Smith & Wesson" stamped on them. These knives, that they bought for less than $1 each would ordinarily sell at Wal Mart for $15 are now sold at $50 because of the S&W logo. People buy them because of the name association with high quality firearms, and are either disappointed with them and never admit to owning them, have no idea how bad the junk is and show off to their friends that they have a S&W knife (friends of course rush down to Wal Mart and throw money at random employees until they get one too), or are the victims of a horrible accident resulting from the knife folding over the liner lock or failing at some other critical juncture.
This is bad right? Well, it gets worse. When a good old fashioned US knife company like Schrade is forced to close it's doors because people have stopped buying real quality tools in favor of these warped imported pieces of junk, the jackals at Taylor are waiting in the wings, wringing their hands and salivating, hoping to snap up a piece of the corpse before it's cold. In this case, they bought the Schrade name and many (if not all) of the patents and designs, danced for a few moments in the misery of many skilled craftsmen now unemployed, and headed off to China where they could crank out the designs at a fraction of the price by using child labor and materials that resemble steel, all with the eye of making even more money by continuing to sell Schrade tools at the same prices as when they were US made, because people know for a fact that the ST1 was a good quality tool. People like your friend, who owned an original Tough Tool and like it (and why not? It was a well made tool with decent quality components and materials) think it's great and buy more of them for tool loving friends for Christmas, birthdays etc and can't understand why you think it's a hunk of crap. Your friend starts to think you are an idiot because he's carried and used the exact same tool for years without a problem, and yours broke in half and caught fire while cutting a particularly thick piece of cheese.
That's why I hate Taylor and all they do. I expect to hear from their lawyers any time now, and I'll bet they can afford good ones with all of your hard earned money lining their pockets and stuffed into closets in the mansions folks have bought them. As far as I am concerned, if they tried sueing me for saying that, it just proves my point about them being spineless vultures.
A hearty one finger salute to all my friends at Taylor! May you one day be trapped in a sinking submarine, and your only hope of salvation is to cut your way free with your own shoddy products!

Def
He does think like me... :D :o
I'm sure he will find that thought comforting :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



