Gerber Mp600 owners club ;)
-
Think I can handle that request, Charles. :)
Some of the rare ones have small differences that are minor, but indicate the age/stage of the Multi-Lock/MP600 series. Several of the rare tools have the same basic toolset as the regular 600s, but several have differences like an awl, blade exchanger, hook pick, combo blade, scissors, etc, etc.
Pics.












-
Very cool. I love the awl, that is a really useful tool. Looks like it could ream/drill a nice hole in wood, punch a hole in a belt, and also be used to sew in a pinch.
The fisherman is cool too. File has a fish hook sharpener groove. Is it a diamond file?
I have a sight tool on the way, actually. How rare is that? I was going to mod it, but if it’s super rare and expensive I might not.
Charles.
-
@ChopperCharles said:
Very cool. I love the awl, that is a really useful tool. Looks like it could ream/drill a nice hole in wood, punch a hole in a belt, and also be used to sew in a pinch.The fisherman is cool too. File has a fish hook sharpener groove. Is it a diamond file?
I have a sight tool on the way, actually. How rare is that? I was going to mod it, but if it’s super rare and expensive I might not.
Charles.
The awl is indeed pretty good. :)
The file on the Fisherman has a diamond side and chisel tip. Pretty cool design I wish Gerber had incorporated into more 600 versions.

The Sight Tool isn't collectible rare yet, because they still make them. I included it mainly because there are hundreds of Basic MP600s for every one Sight Tool made. The Sight Tool and Snap-On are the best of the bunch for availability and usability. They both also have the updated lock tabs with the huge blades. Great tools and nice to use. Just be careful adapting the sight mount for a bit driver. It may not be tempered like the regular Gerber drivers(it can be used that way, but not for heavy duty driving), based off of experiences I've read. :ahhh
The blunt plier head will work in the sight tool and Snap-On as well if you want to use it in the frame.

-
@gerleatherberman said:
Think I can handle that request, Charles. :)Some of the rare ones have small differences that are minor, but indicate the age/stage of the Multi-Lock/MP600 series. Several of the rare tools have the same basic toolset as the regular 600s, but several have differences like an awl, blade exchanger, hook pick, combo blade, scissors, etc, etc.
Pics.












I need to apologize for the mindless error I made in the tool labeling. The Camo "Woodsman" isn't a Woodsman. It is a Camo "Pro Scout ".
Sorry about that. I will delete the photo from imgur immediately.Another case of me falling victim to taking a seller's words at face value and not checking things as thoroughly as possible.
Again. Sorry about that. Lots to learn, but getting there. :)
-
Here’s my latest MP600. It started life as a Sight Tool. I kept that lovely large blade and the long reach Phillips, and modded it with scissors and a file. I had space left for one more tool so I made a small punch tool out of a spare blank. I’m thinking about modifying (cutting short and pointing) the scraping tool that came with the sight tool instead though, as the punch I made is pretty short. Still, it would make a hole in a leather belt easily.
Charles.


-
Looks awesome, Charles!

One thing about the scraper tool though. It is a mild steel, but could possibly be tempered. Though the lack of information on the scraper's mild steel composition is unknown as far as I know(maybe someone else knows).

-
Hey CC, that is a cool modded MP600ST.
JonesE
-
Thanks! I’ve got a pocket clip on the way, and I’ll drill and tap the handle and mount the clip as soon as it arrives. Then it’ll be complete I think. Well, unless I find a black blunt nose pliers head.
Charles.
-
So after some experimenting, the awl from a Center Drive fits in the tool IF it is next to one of the thinner long tools. Then the tip sits next to the retracted jaws. If it’s anywhere in the center it contacts the jaws when they’re retracted.
In the pic you can see the tip sitting almost against the jaws. There is less than 1mm between the jaws and the tip. The awl tool is next to the file tool. It does not work next to the scissors. I haven’t tested it next to any of the blades yet.
You’ll also need to shim it properly so there’s not too much empty space on the fixed side of the pivot, which may move the tool closer to the center.
Charles.

-
Great job Charles
.I really like the awl on the CD myself.
-
Great job!That CD awl is the best plastic drilling awl I've used. The ultra pointy tip and good steel temper make a difference. :)
-
I like it too, but I put a pro scout saw holder in my center drive, and had to remove the awl. Fortunately I get to use the awl in my new modded sight tool. I removed the home-made awl and put this in its place. It’s a good change. :)
Charles.
-
I snagged a near mint black oxide mp400 for the paltry sum of $9 (shipped!) to use as a donor for the scissors i added to the sight tool mod above. Well, I happened to have a spare silver mp600 handle and the needle nose I removed from the sight tool. So I moved the parts from the mp400 over to this tool, and then I went ahead and made it bladeless and added a file and the scraper from the sight tool. I had some silver scissors so I tossed them in too.
Then of course I had to add a pocket clip as well. Trying a new one this time. It’s a third the cost of the clips I’ve been using ($10 shipped vs $23+$6 shipping) and it’s black, which works well on this contrasting Tool. It’s not as nice as the titanium clips I’ve been using, but on a bitsa tool like this, made from other tools’ leftover parts, it works.
Thing is, except for those silver scissors, this is really nice now!
Charles.


-
@ChopperCharles said:
I snagged a near mint black oxide mp400 for the paltry sum of $9 (shipped!) to use as a donor for the scissors i added to the sight tool mod above. Well, I happened to have a spare silver mp600 handle and the needle nose I removed from the sight tool. So I moved the parts from the mp400 over to this tool, and then I went ahead and made it bladeless and added a file and the scraper from the sight tool. I had some silver scissors so I tossed them in too.Then of course I had to add a pocket clip as well. Trying a new one this time. It’s a third the cost of the clips I’ve been using ($10 shipped vs $23+$6 shipping) and it’s black, which works well on this contrasting Tool. It’s not as nice as the titanium clips I’ve been using, but on a bitsa tool like this, made from other tools’ leftover parts, it works.
Thing is, except for those silver scissors, this is really nice now!
Charles.
Very nice work, Charles! Two nice custom 600s now!

-
Well technically I have four nice mp600s now. I do wish I had another pro scout saw holder, to return my pro scout to stock. Or a diesel saw.
Charles.
-
Here is the modded ST, now with a pocket clip for EDC.
I’m not sure about EDCing it though. I prefer a saw over a blade, as I always have a blade on me of one sort or another. But this has the super long ST blade, so it’s actually far more useful than a normal mp600 blade. Stil... if I find another pro scout for a good price, I may toss the blade and the lanyard loop and add a saw exchanger. Or perhaps mod in a diesel saw. Depends on what I find for good prices.
Charles.

-
Carried the MP600 custom today. It has mod blunted NN hybrid tip pliers, FLiK #1 phillips driver(to increase the function of having the #2 Gerber phillips) and FLiK wood saw(the only 600 with a FLiK saw I know of).


-
I like that extra driver! And the saw is slick too. Too bad you had to sacrifice a flick to make it though. Those aren’t easy to come by.
Charles.
-
@ChopperCharles said:
I like that extra driver! And the saw is slick too. Too bad you had to sacrifice a flick to make it though. Those aren’t easy to come by.Charles.
Thanks, Charles!

The FLiK parts helped repair another FLiK and a FreeHand(FLiK's gigantic bigger brother needed a pliers mount screw). Got three tools fixed up with the one FLiK(it had a bad pliers mechanism and stripped out screw to begin with), so the sacrifice was worth it. :)
I still need to get the FLiK scissors in the 600, but making the pivot bushing(the FLiK outer pivot holes are larger while the FLiK small tools have the standard Gerber pivot size) by hand out of tiny washers is a PITA. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
