What did you just get?
-
@gerleatherberman said:
So...
I didn't lose my Marble's. :DAll new except the Safety pliers.






Been meaning to add a few more Marble's. The Case "Fly Fisherman" the Marble's is based off of is often a $300 or more knife, so for something that will be used and carried, I'm going the Marble's route. But the big question is--are the scissors any good? The First Mate is something I'm wondering about the quality of; seems it's one of the lesser priced rigging knives out there. The Handyman's Helper has always interested me, but is based on a knife made in Sheffield by Watts in the '50s, and is often not that expensive. Is Marble's putting their name on that tiny hammer tool? I have a no-name pliers version of it, and that thing's a novelty item at best. Kept it on a key I occasionally needed, and when I needed to use the screwdriver, couldn't get any leverage.
-
@SirVicaLot said:
Nice ones glbm! Like the scales on that Tinker!
Thank you, SirVic!

-
@cody6268 said:
Been meaning to add a few more Marble's. The Case "Fly Fisherman" the Marble's is based off of is often a $300 or more knife, so for something that will be used and carried, I'm going the Marble's route. But the big question is--are the scissors any good? The First Mate is something I'm wondering about the quality of; seems it's one of the lesser priced rigging knives out there. The Handyman's Helper has always interested me, but is based on a knife made in Sheffield by Watts in the '50s, and is often not that expensive. Is Marble's putting their name on that tiny hammer tool? I have a no-name pliers version of it, and that thing's a novelty item at best. Kept it on a key I occasionally needed, and when I needed to use the screwdriver, couldn't get any leverage.The Fly Fisherman is pretty poorly made, with the pin implement wanting to seat into the scissor slot when the scissors are open, causing a ridiculous need to open the pin to close the scissors. Scissors on mine are fair at best. Paper and thread cut clean, but anything thicker wants to bind up. If I were going to carry one, I'd definitely peen the scissors pin and tighten the pin implement rivet to fix the issues. The file isn't going to work well on fish hooks, but is nicely cut for fingernails. The main blade is decent enough though. It is thin and cheap enough I'd recommend it to anyone who is willing to work on a brand new tool they just bought.
The Handyman Helper is pretty well made and the measurement increments on mine checked out good enough to use.
The First Mate...oh my, what a tool. Mine is very well made and everything is authoritative in action. BUT! The one I recieved has sharp handle edges. And I am not particularly concerned with "comfort" most of the time, because even stuff like the OG LM PST has a reasonably expected level of discomfort for what it is and how it works. The First Mate scales feel like they came right off of a belt sander. If I were going to carry it, I would file the rough edges down a bit and lightly wheel polish the scales. Another tool I'd recommend to anyone willing to do some work to make it right. The Marlin spike is nice. :)
The little Hammer tool is definitely not something I'd ever buy to use. That set is solely a novelty for the collection.
The only Marble's tools I feel are ready to use out of the pack are the camp knife(GI demo style) and screw driver tool. The camp knife can opener isn't great, but it works. I did grind a starter edge on my user camp knife, bit it wasn't absolutely necessary. The screw driver tool is surprisingly well made and requires no modifications to work properly. My only complaint about it is that the phillips only fits #2/#3 phillips screws, where a pocket screw driver is mostly used on #1/#2 phillips screws.
Are the Marble's tools worth the meager price? Yes, but with the knowledge that the person buying them may need to do some repairs to them out of the box. A decent set of needle files and a ball peen hammer will fix a lot of the issues I mentioned.
They are fun and definitely priced appropriately. Hope this lengthy thread helps in your decision, Cody!

-
- power steering oil
- oil suction gun
- engine oil
- oil filter



.....apparently the Wix filters in Europe are made in Ukraine...

...so I had to check it for radioactivity....apparently I’m getting 0.22 microsiverts off it [emoji15][emoji15][emoji15][emoji15]
Sent from my iPhone using Tapatalk
-
Will that fit my Honda :D
-
Purchased a ZT Coffee Mug. It's the perfect size. 8)

-
Great mug

-
@gerleatherberman said:

Double

Drinking coffee from any other mug, around your ZT blades, would be a disservice.
*Thanks, GLBM! Collecting knife-branded swag is another fascinating-iteration of EDC-ing. :o Now I'll have to pick-up a 'Benchmade Mug' too. :-*

-
Not Mt but just got these! 1mm to small but it works, these are 34mm and I usually have 35
Spartan for scale

[It's not failure if you learn something from it]
-
Ok kottskrapa, you got me. What the smurf are those?

...Ah! Earrings

-
That's correct sir!
[It's not failure if you learn something from it]
-
@eTripper said:
*Thanks, GLBM! Collecting knife-branded swag is another fascinating-iteration of EDC-ing. :o Now I'll have to pick-up a 'Benchmade Mug' too. :-*

You'll have to get the BM mug now, or it'll be jealous of the ZT mug. Knife swagger. Nice.
@kottskrapa said:
Not Mt but just got these! 1mm to small but it works, these are 34mm and I usually have 35Spartan for scale

Very cool and clever!

@Max Stone said:
Ok kottskrapa, you got me. What the smurf are those?
...Ah! Earrings

I started by thinking the same thing. Glad I got to see your corrected post to know before asking him as well. :D
@kottskrapa said:
That's correct sir!Props to ya for that. I'm too much of a wimp to do that, but can appreciate someone who is into it.

-
@gerleatherberman said:

You'll have to get the BM mug now, or it'll be jealous of the ZT mug. Knife swagger. Nice.
Very cool and clever!
I started by thinking the same thing. Glad I got to see your corrected post to know before asking him as well. :D
Props to ya for that. I'm too much of a wimp to do that, but can appreciate someone who is into it.
Thought they was kind of fun!
Just take your time and don't hurry it and it will go quite good [emoji6]
[It's not failure if you learn something from it]
-
Today:
Original Charge Ti
Fuse
Red Pioneer with Swiss cross
0.8610.26 Soldier (07)
Master Craftsman 5 layer
-
Nice selection of tools Max

-
@kottskrapa said:
Not Mt but just got these! 1mm to small but it works, these are 34mm and I usually have 35Spartan for scale

[It's not failure if you learn something from it]
Only did one side, so true though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
