If only
-
@Happy Gilmore said:
But nothing can fix the wire cutters shattering, unless we can get a third party ..or I make them myself now that I think of it..
Didn't Sam put third party cutters in his?

From what I recall, he just bought them and added them, without having to modify them at all, although I think he sharpened them?
-
Between the standard and plus I thought I would buy the plus for the scissors until I saw it had a combo blade, nnooooooo,
-
You mean like this?
Charles.

-
@ReamerPunch said:
Didn't Sam put third party cutters in his?
From what I recall, he just bought them and added them, without having to modify them at all, although I think he sharpened them?
Yeah. These are pretty heavy cutter with I dun know what steel. A wire of this gauge will shatter the standard carbide 100%. No problem with the m3 screw either though it took a few adjustments. Didn't even dent or ding the hard wire notch.

-
@ChopperCharles said:
You mean like this?Charles.
I want one -
Heh, I’d have to charge a ridiculous amount for one to make it worth my while. The titanium clip is $26, and the amount of labor is pretty intensive. A used pro scout goes for around $35, sometimes less, depending on condition.
If you want to DIY the clip you’ll need tungsten carbide drill bits, a drill press, a high quality Irwin tap (either 3mm or 4-40 depending on preference), and the screws heads will have to be turned on a lathe (or chucked into the drill press with a file held to them) until they fit through the slot in the clip. You can save that step if you don’t use a deep carry clip, but I prefer having the tool a little deeper in my pocket.
Also a dremel to cut the screws shorter and to ream out the holes in the clip itself.
if you’ve already got most of the tools it’s not that bad to do one for personal use. But the amount of time required makes it unprofitable to sell.
Charles.
-
The cutters don’t bother me because they’ll shatter. I never cut hard wire, I don’t care about hard wire. I don’t like the cutters because they can’t cut thin gauge stranded wire. The tolerances are larger on the replaceable cutters than on the cast-and-machined cutters, and so they don’t do a good job on Motorcycle wiring harness wire, which is usually what I need wire cutters for.
Charles.
-
@ChopperCharles said:
Heh, I’d have to charge a ridiculous amount for one to make it worth my while. The titanium clip is $26, and the amount of labor is pretty intensive. A used pro scout goes for around $35, sometimes less, depending on condition.If you want to DIY the clip you’ll need tungsten carbide drill bits, a drill press, a high quality Irwin tap (either 3mm or 4-40 depending on preference), and the screws heads will have to be turned on a lathe (or chucked into the drill press with a file held to them) until they fit through the slot in the clip. You can save that step if you don’t use a deep carry clip, but I prefer having the tool a little deeper in my pocket.
Also a dremel to cut the screws shorter and to ream out the holes in the clip itself.
if you’ve already got most of the tools it’s not that bad to do one for personal use. But the amount of time required makes it unprofitable to sell.
Charles.
Great job and thanks for sharing

Looks like I will have to wait for gerber to bring out a
Factory version (I can dream). -
@ChopperCharles said:
The cutters don’t bother me because they’ll shatter. I never cut hard wire, I don’t care about hard wire. I don’t like the cutters because they can’t cut thin gauge stranded wire. The tolerances are larger on the replaceable cutters than on the cast-and-machined cutters, and so they don’t do a good job on Motorcycle wiring harness wire, which is usually what I need wire cutters for.Charles.
I can't speak for CD as I have not really put them to use.. The pliers are spring loaded so I guess that's why the pivot tolerance are higher. All my user MPs with replacable cutters cuts small gauge wires. With the 3rd party cutters, it's pretty much having the same advantage as the LMs pliers.
-
@gerleatherberman said:
/post/1966579Hmm.. That's so expected but still sucks... That's quite a lazy change to call them a "plus" model..
-
@Sam Lim said:
I can't speak for CD as I have not really put them to use.. The pliers are spring loaded so I guess that's why the pivot tolerance are higher. All my user MPs with replacable cutters cuts small gauge wires. With the 3rd party cutters, it's pretty much having the same advantage as the LMs pliers.Not a one of my MP600s with replaceable cutters are GOOD at thin stranded wire. They’re acceptable, but not good. The ancient mp600 with cast cutters that are dinged and damaged from years of hard use out perform brand new replaceable cutters every time, on thin stranded wire.
Charles.
-
@Sam Lim said:
Hmm.. That's so expected but still sucks... That's quite a lazy change to call them a "plus" model..
Pretty much the same thing LM did with the Wave/Charge+. Change pliers head and make it a new model. Gerber did at lease offer a new finish for the CD+ on top of the scissors and large combo blade.
I really like the satin SS and stone washed looking tools. Not quite as much as I liked the original two-tone CD, but still like it a lot.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login