What Rescue Tool do you use, and why?
-
I'd love to do that, but I just know I'd get stopped and searched.

But it says "RESCUE TOOL" right on it, so obviously it can only be used for GOOD!
Surely any copper can see that!It still has a locking blade and sadly that's all that counts.

I would like to think they would use their loaf.
-
I'd love to do that, but I just know I'd get stopped and searched.

But it says "RESCUE TOOL" right on it, so obviously it can only be used for GOOD!
Surely any copper can see that!It still has a locking blade and sadly that's all that counts.

I would like to think they would use their loaf.
Not likely with target's to meet ::)
-
spring loaded center punch is the way to go, everything else is a rip-off.
I speak from 32 yrs. in the fire service.
-
@STXFR5007B said:
spring loaded center punch is the way to go, everything else is a rip-off.I speak from 32 yrs. in the fire service.
Welcome aboard! Most of my fire service time was in a rural/small town VFD before going to EMS.What's been your primary experience?
-
mostly wildland/urban interface with a very liberal dose of metro, rural and "pure" wildland thrown in for good measure.
my current house is in a residential area; the average size home is approx. 3500 sq ft and it goes up from there, we also respond up into the foothills on the eastern end of our battalion.
this house is for the "old" guys and is supposed to be slow

I'm retiring in Sept; can't wait to go, I've had my fill - it's on to bigger and better things!

-
I get the impression you're in So. Cal...and if that's the case I'd be more than ready for retirement after three consecutive brushfire seasons there.
-
naw.....central California, east side of the san Joaquin valley although my dept covers the un-incorperated area from 6000' in the sierra nevada clear over to the montery county line in the coast ranges.
big area; very, very diverse.
all of our engines are rescue engines: we also have a heavy rescue in the central part of the district that responds any where it's needed.
we serve 2600 square miles and 150,000 citizens with 11 engine companies, 1 ladder, 1 heavy/swift water rescue 1 rescue boat 1 squad, 2 brush patrols, 6 water tenders and 1 state oes engine.
our staffing leaves much to be desired, we run 2-0 staffed except the ladder which is 3-0 and 2 engines staffed 3-0. budgets are very stretched as you might imagine.
how about you? what's your dept like?
-
That's a lot of territory to cover with that little bit of resources.I wouldn't want the headache of covering staffing for vacations.
My old dept,like I said was a VFD,serving about 4500 people in 6 sq miles.Apparatus is 3 engines,1 rescue,and one command truck out of one station. I took a look at the most recent TOE,and it's very officer heavy.1 Chief,2 Ass't Chiefs,2 Deputy Chiefs,4 Capts,4 Lt's and 24 FF. When I was there and active I was a Driver/Engineer,I see that my old unit number is now assigned to a Lt.BTW,my great-uncle was a major player in organizing some FD's in Northern Cal,in and around the Truckee area.
-
-
@WhichDawg said:
Dunc why no case with the RecueTool? that bright red sure makes it stick out
and it's nice protection against fly-around missile (roll over)
just curious

I bought it off a forum member on here but it didn't include the sheath . The seller did tell me before I bought it

At work I'm issued one of these ..... http://catalog.beaversports.co.uk/product.php?image=29&pn=Scorpio&pid=28#imagewhich I have attached to my lifejacket at all times but its very low quality steel and doesn't take a very good edge . My Vic Spirit believe it of not has a slightly longer cutting edge and out performs it several times over .And I can deploy it nearly as quick . The fixed blade does have a serrated edge which is passable .I will only use it in emergancies when I need one handed deployment .The key thing in my job is to have something the public won't be scared of and the Spirit is well suited and with the blunt tip its ideal and really shines in its role

Dunc
-
A WWR LaGRiffe or a Tasman Salt or a Spyderco Rescue.
-
I just got one of these ...
Boker BK-02BO300 Boker Plus Cop Tool. The Cop Tool, originally developed and field tested by Roy Huntington, a police officer with more than 20 years experience, features a 1.75" chisel ground blade made of 440C stainless steel. The chisel ground blade has a brushed satin finish with a seatbelt/line cutter, a serrated cutting edge, a sharpened flat chisel tip, a lower finger choil and full tang construction. The deeply checkered G10 handle, 4.25" long, has a finger choil and a lanyard hole. A very durable heay uty thermoplastic sheath is included. Overall length: 6.0" of the tool is.
The Cop Tool can be used as a lever, chisel, belt cutter, scraping tool, or as a multifunctional knife.
Small, compact and extremely effective.
The bead blasted blade is made of high performance 440C stainless steel.
For the perfect grip, even with gloves or wet hands, Boker uses textured G-10 for the handle, which eliminates any danger of slipping.
The leather sheath can be carried discreetly in the waistband, or fits well on any gear belt .
The Boker Plus Cop Tool comes complete with lanyard as shown.
-
@dunc5 said:
Dunc why no case with the RecueTool? that bright red sure makes it stick out
and it's nice protection against fly-around missile (roll over)
just curious

I bought it off a forum member on here but it didn't include the sheath . The seller did tell me before I bought it

At work I'm issued one of these ..... http://catalog.beaversports.co.uk/product.php?image=29&pn=Scorpio&pid=28#imagewhich I have attached to my lifejacket at all times but its very low quality steel and doesn't take a very good edge . My Vic Spirit believe it of not has a slightly longer cutting edge and out performs it several times over .And I can deploy it nearly as quick . The fixed blade does have a serrated edge which is passable .I will only use it in emergancies when I need one handed deployment .The key thing in my job is to have something the public won't be scared of and the Spirit is well suited and with the blunt tip its ideal and really shines in its role

Dunc
You need one of these
:
-
That would be very nice

Dunc
-
-
I have two Ti rings which have a screw in glass breaker but! I will get one of those ResQmes tools,as I fear in a crisis fiddling and trying to screw a tip into my ring would waist valuable seconds :-[
I should point out I don't really have two my wife has one and I the other

here's a picture of the rings,

-
-
-
My father has 25 years fire fighter and other than a blade he had a spring loaded punch and with a Brother going into the department I was looking for a good gift for him I was thinking the Vic rescue tool but there sure are alot out there.
Are there firefighters out there who use this or have a fav. I know the punch but is there any other tried and tru ones out there not not just a glove box rescue tool.
Peace
and those ring things are cool but ya I would worry about my finger bones not being strong, neat idea. -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login