Gerber Mp600 owners club ;)
-
Well technically I have four nice mp600s now. I do wish I had another pro scout saw holder, to return my pro scout to stock. Or a diesel saw.
Charles.
-
Here is the modded ST, now with a pocket clip for EDC.
I’m not sure about EDCing it though. I prefer a saw over a blade, as I always have a blade on me of one sort or another. But this has the super long ST blade, so it’s actually far more useful than a normal mp600 blade. Stil... if I find another pro scout for a good price, I may toss the blade and the lanyard loop and add a saw exchanger. Or perhaps mod in a diesel saw. Depends on what I find for good prices.
Charles.

-
Carried the MP600 custom today. It has mod blunted NN hybrid tip pliers, FLiK #1 phillips driver(to increase the function of having the #2 Gerber phillips) and FLiK wood saw(the only 600 with a FLiK saw I know of).


-
I like that extra driver! And the saw is slick too. Too bad you had to sacrifice a flick to make it though. Those aren’t easy to come by.
Charles.
-
@ChopperCharles said:
I like that extra driver! And the saw is slick too. Too bad you had to sacrifice a flick to make it though. Those aren’t easy to come by.Charles.
Thanks, Charles!

The FLiK parts helped repair another FLiK and a FreeHand(FLiK's gigantic bigger brother needed a pliers mount screw). Got three tools fixed up with the one FLiK(it had a bad pliers mechanism and stripped out screw to begin with), so the sacrifice was worth it. :)
I still need to get the FLiK scissors in the 600, but making the pivot bushing(the FLiK outer pivot holes are larger while the FLiK small tools have the standard Gerber pivot size) by hand out of tiny washers is a PITA. :ahhh -
OK. This thread pursuaded me to finish my modded 600. Made a bushing wide enough for the scissor and spring out of some steel sheeting out of a computer case. The weaker steel is fine for scissors, so didn't need to make a bushing out of steel washers.

I did have to grind 1/8" off of the scissor handle(as well as remove the FLiK scissor thumb pad), so it could be used with the pliers retracted, though I will use them with the handles open for effectiveness.
Here it is. FLiK scissors in an MP600. :)







-
Oh my. Those scissors with that orientation will fit right in a Center Drive!
On the hunt for a damaged flik now...
Wait. That's an outside opening tool. I wonder.... could it replace the OHO blade, to make a bladeless center drive??
Charles.
-
If there is enough metal on the tang to work with, that would be really cool to have them OHO.

The FLiK still uses the saf-t-lock mechanisn on the OHO outboard tools, so it may not work. But, that said, I'm definitely not a master modder, so maybe someone else has some insight on the idea. :)
The FLiK scissors, even without the thumbpad, are notably better than the CD+ scissors. More cutting area and a longer handle. If you could make them outboard on the CD, you could keep the nice thumbpad too. :)
Good luck on the FLiK hunt, Charles!
And don't forget to post a wanted thread if you haven't done so!
I can measure the thickness of the sheet I used to make the bushing when you're ready as well. It ended up being perfect with no play in the lockup.
Also, forgot to mention earlier, I ground about 3/32" off of the spine of the scissor frame. No mods were done to the spring though.
-
Nudge Nudge, Gerber company.

Those are the scissors that should be in the CD+. ;)
Once a user can get over using the scissors with the handles open, they'll see how much nicer the cutting action is without the lanyard hole lock release of the CD+ in the way of using the scissors.
The CD sprung pliers would make the handle-open scissor-action even easier. -
Nice job/mod gerleatherberman!!!

-
Actually, with those scissors, the stock file, combo pry tool, and awl, plus a saw blade in place of the OHO knife blade, the center drive would be damn near perfect.
Charles.
-
@Juan el Boricua said:
Nice job/mod gerleatherberman!!!

Many thanks, Juan!

@ChopperCharles said:
Actually, with those scissors, the stock file, combo pry tool, and awl, plus a saw blade in place of the OHO knife blade, the center drive would be damn near perfect.Charles.

-
My first modern Gerber on the way. Should be here next week. Sellers pic.

-
Is the Gerber forum always this quiet, or is it that my tool is plain Jane?
-
Nice one!
I really like GerbersEnviado de meu moto g(6) usando o Tapatalk
-
@Roc said:
Is the Gerber forum always this quiet, or is it that my tool is plain Jane?Hi Roc, Congrats on the new MP600. The Gerber forum could seem quite right now, but there are quite a lot of members that carry and use their MP600s. It could be that there is no Gerber multitools challenge going right now. I know in the past there has been ones for MPs and the Center Drive earlier this year. Post up some pics when you get your MP600 in hand.
JonesE
-
@JonesE said:
Hi Roc, Congrats on the new MP600. The Gerber forum could seem quite right now, but there are quite a lot of members that carry and use their MP600s. It could be that there is no Gerber multitools challenge going right now. I know in the past there has been ones for MPs and the Center Drive earlier this year. Post up some pics when you get your MP600 in hand.JonesE
Makes sense. I’ve already been posting in what tool did you carry in general forum.

-
Alright...I'll start making some noise for our pal Roc!

And this is one of two Basics I have; so, plain jane too!!! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

