The SideClip Owners Club
-
Nice one, HG!

Carried the SideClip for the last day of the anything challenge.




-
@gerleatherberman said:
Nice one, HG!
Carried the SideClip for the last day of the anything challenge.




Holy moly that is shiny. I was thinking of a full disassemble and blueing mine. Thoughts? Also what are size 5star security torx are these?
-
@Happy Gilmore said:
Holy moly that is shiny. I was thinking of a full disassemble and blueing mine. Thoughts? Also what are size 5star security torx are these?Thanks, HG!

It is a TS10(T10 5-pt security torx).
The bluing sounds interesting!

Not sure how well it would hold up, but it would have a good patina with wear. -
Great pics guys
and congrats on getting one, HG

-
-
I’ve been using the sideclip for two days and i am in love. soooo skinny, i forget i have it. Used the can opener as a pry tool today and ot works amazingly. Cheers.
I also used the blade to carve a piece of wood into a mold for a Victorinox inspired Lighterbro. yea..thats right, a 58mm Rambler attached to a mini-bic lighter case...
-
@gerleatherberman said:
Nice one, HG!
Carried the SideClip for the last day of the anything challenge.




Ok GLB...how did you get that tool so shiny? I must to to my tool. Must must.
-
@Happy Gilmore said:
Ok GLB...how did you get that tool so shiny? I must to to my tool. Must must.1750RPM motor with 8" medium cloth polishing wheel and stainless steel compound. Disassembled tool completely and polished everything, even the inside of the handles to make it more rust resistant. I don't want an oil covered tool in my nice clothes pockets, so I rarely oil the polished Sideclip. No rust so far. The whole job was fairly easy with the 8" polishing wheel setup. :)
Be careful if you use a 3450RPM 6" wheel, as it makes the steel to hot and leaves polishing streaks wherever there are markings on the handles. If you have a 3450RPM wheel, be careful or use a variac to drop the RPM of the motor. I use a variac on the 1750 motor to make it slower for SAK scales and plastics.
-
@Happy Gilmore said:
Ok GLB...how did you get that tool so shiny? I must to to my tool. Must must.From the pics, you are already starting with the shiny version SideClip (unlike the matte version glbm stated with) so it may not be as hard to get it polished
metal polish may get you the results you want 
-
@gerleatherberman said:
1750RPM motor with 8" medium cloth polishing wheel and stainless steel compound. Disassembled tool completely and polished everything, even the inside of the handles to make it more rust resistant. I don't want an oil covered tool in my nice clothes pockets, so I rarely oil the polished Sideclip. No rust so far. The whole job was fairly easy with the 8" polishing wheel setup. :)Be careful if you use a 3450RPM 6" wheel, as it makes the steel to hot and leaves polishing streaks wherever there are markings on the handles. If you have a 3450RPM wheel, be careful or use a variac to drop the RPM of the motor. I use a variac on the 1750 motor to make it slower for SAK scales and plastics.
Think I can do this with a Dremel and polishing attachment?
-
Since you have the non matte version I would just carefully sand off the logo. I did this to my Mini tool and it looks stock. Sand with the existing sander lines and it will look stock.
-
@Poncho65 said:
From the pics, you are already starting with the shiny version SideClip (unlike the matte version glbm stated with) so it may not be as hard to get it polished
metal polish may get you the results you want 
Thank you for mentioning that, Poncho!

Indeed, it will make his work immensely easier.
@Happy Gilmore said:
Think I can do this with a Dremel and polishing attachment?Since you're beginning with a moderately polished version to start, I think you could definitely do it with a Dremel setup. 1" cloth Dremel wheels and some stainless steel polishing compound, and patience could result in a beautiful polish.
@SteveC said:
Since you have the non matte version I would just carefully sand off the logo. I did this to my Mini tool and it looks stock. Sand with the existing sander lines and it will look stock.That would look nice too.

But, that said, I think he is after the Swiss-style polish.
I would note that when undertaking a mirror polish on a Leatherman, don't let tiny imperfections lead you to over-polish. There is a point where polishing out tiny imperfections will make the surface look "wavy". Think of the surface like a wood table with veneer. Once you sand too deep, you have a lot of work to make it look good again with getting the primary surface evened out. :ahhh
-
@gerleatherberman said:
That would look nice too.
But, that said, I think he is after the Swiss-style polish.
I would note that when undertaking a mirror polish on a Leatherman, don't let tiny imperfections lead you to over-polish. There is a point where polishing out tiny imperfections will make the surface look "wavy". Think of the surface like a wood table with veneer. Once you sand too deep, you have a lot of work to make it look good again with getting the primary surface evened out. :ahhh
The non matte versions are a lot rarer than the matte, seems a shame to polish one out.... IMO
-
I tend to agree as a collector.

But, his tool is already in used condition, so it probably won't hurt the value too much.

-
:)
-
Looks like a nice mat-finished example David

-
Great pics Steve and David

-
Very nice Clips, Steve and David!

-
Had the SideClip out for my day off and nice evening/coffee date. :)



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

