What did you use your Leatherman for today?
-
Great use countrydirt

-

Getting some coconut milk [emoji3048]
-
Great use Alexanderre

-
Fixing some toys

-
Great fix ABURABURA

-
Cutting some sausages apart at a family cookout using the Free T2.
Sent from my SM-N950U using Tapatalk
-
Great use countrydirt

-
Found out on Friday that a towel hanger in the bathroom of my cabinet at work has gone a bit wobbly. Couldn’t reach the screw with a standard LM flat-phillips bit, so brought a Micra today.

Disassembled the hanger and found a larger screw on the inside has gone loose, so Signal was used to tighten it up.

Could have used Micra on it as well, but was a bit afraid to break the driver and I had a Signal on me anyway. Or I could have brought a Wave and it would manage all of this on its own just fine, so I really believe Wave is a much better solution for the urban environment
Also tightened those screws holding the hanger in place just in case

-
Nicely done Alex !

-
Great job Alexanderre

-
thanks, gents

-
@alexanderre, I don't think I've used the can opener on any tool left handed
. I'm guessing it works pretty well 
-
@Aloha said:
@alexanderre, I don't think I've used the can opener on any tool left handed
. I'm guessing it works pretty well 
Well if that’s the way you do it - you don’t really have a choice [emoji23] Seriously though- it works pretty good [emoji1305]
-
I’m a southpaw and I go around the tin anti-clockwise. A little awkward but works.

-
So it all started yesterday with me wanting to unleash a mojo guitar stompbox I used to create a feeling of an overdriven cranked amp without deafening any neighbors or bandmates onstage back in a day [emoji854]
I even bought a 9V battery, took the pedal out of the pedalboard where it remained daisy-chained with others for years and was about to use the Signal just for unscrewing it and putting in a battery to play a little blues, but.... it won't turn on.




It took me quite a while experimenting with it trying to find out if it was a battery's fault or some contacts or whatever... All of the wires were intact, the battery was fine... And it did work via a power supply. So after an hour of thinking it through I hard-wired the battery's contacts to those on the power supply input and it works like magic again.
Didn't take action pics of the soldering process, but used Signal pliers covered with a duct tape for scratch prevention to unscrew the pots, wire stripper to get some wires ready for soldering and even pliers again to hold a tiny piece of hot wire in place. Glad it worked and I sure did make my Telecaster scream again with it

Micra, Wave, the bit kit and extender were all involved too, but that’s a story for another time [emoji2]
-
Nice work Alexanderre

-
Leathermans all to the rescue, nice

-
Forgot to take pics but my Core helped gut an old console tv . I used it to snip wires and pull off wiring harnesses.
I then turned the shell into a new tv stand.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login