The great SOG show-off thread.
-
The brochure that came with the PP lists the “P2” (Power Plier), the “P3” (Pocket Power Plier), Paratool (“Another great design from the team of Blackie Collins and Spencer Frazer”), the ToolClip and the Micro ToolClip. This brochure pre-dates the Internet, so a great informative reference. Difficult to photograph because of reflections and size. Will need to be scanned. I’m certain we can add some good info to build out the encyclopedia.


-
Wow! That is nice, Max! Thanks for posting that one!

That is the oldest brochure for SOG MTs I've seen. :o
Looking forward to the scan.
-
Got a new to me SOG PowerLock in black oxide. Came in pretty good shape. Just needed a good cleaning and some WD-40. Didn’t come with a sheath so I am going to have to look for one.
JonesE

-
That is a an uncommon one, JonesE!

The piano locks weren't used for long on the early PowerLock 2.0 versions before going back to the solid lock lever. USA made too(indicated by the hex bolts). :)
-
Added a "Master Mechanic" branded PPP to the PPP mix.









-
PPP one of my favourites.

-
Thanks for the info on the PowerLock GLBM. I didn’t realize the piano locks were that rare.
Great job finding a very nice Master Mechanic PPP. It sure looks nice.
JonesE
-
Here is a pic of my Power Assist.
JonesE

-
Finally got a very early SOG PowerPlier V.1. I have a V.1 already, but it is a later one with the nail holes. The early one has the nail nicks, and I had been looking for one for a long time. Bought this one "used", but it had no issues aside from needing a cleaning.
The V.1 I had already will see some pocket time now, since it has light signs of use.
Pics.
Early PowerPlier V.1.


Early(left) and later(right) V.1 PowerPliers.


Bonus pics of more PowerPliers.
Left to right: V.1, V.2, and V.3.

Left to right: V.1(early), V.1(later), V.2, and V.3.

-
Finally got ahold of a Paladin PT-525. Looks like new after a cleaning with no notable signs of use.








Sandwiched between the PT-510 and PT-540.



-
Congrats GLBM on the early PPP v.1 and the PT-525. I am glad your PPP will see some pocket time. I really enjoy mine.
JonesE
-
@gerleatherberman said:
Finally got ahold of a Paladin PT-525. Looks like new after a cleaning with no notable signs of use.

Sandwiched between the PT-510 and PT-540.
:o -
@ThePeacent said:
:o
-
@gerleatherberman said:
Finally got a very early SOG PowerPlier V.1. I have a V.1 already, but it is a later one with the nail holes. The early one has the nail nicks, and I had been looking for one for a long time. Bought this one "used", but it had no issues aside from needing a cleaning.
The V.1 I had already will see some pocket time now, since it has light signs of use.
Pics.
Early PowerPlier V.1.Early(left) and later(right) V.1 PowerPliers.
Bonus pics of more PowerPliers.
Left to right: V.1, V.2, and V.3.
Left to right: V.1(early), V.1(later), V.2, and V.3.
Necro boost....
I have got a treat for you. I've recently found a PowerPlier I couldn't quite place. It's an early V1, but with different features.- The logo stamping is different and on the right face handle on both sides is a stamp indicating "BOTH HANDLES 9" or 22,5cm"
- On the plierhead the nose is slightly thinner and the upper teath is smoother and less visible to the later V1 counterpart.
- A larger gap under the compound leverage is noticable on the older prototype.
- Finally the ruler on the older prototype starts from the edge of the slipjoint instead of the tool end.
I've emailed Spencer Frazer about it.
He responded and said:
"Hihi . You have the first series of Powerplier where the engraving was somewhat crude. We refined it many times. I don’t think it is more exceptional than that but it definitely is a cool piece and represents our early endeavors in the multi tool industry. Thx for reaching out. Sf"He called it a crude piece XD. To him it's an unfinished product not worthy of being proud of.
This is my first post here, been lurking a while, signed up because Grant told me to. -
@GotBluntnose said:
Necro boost....
I have got a treat for you. I've recently found a PowerPlier I couldn't quite place. It's an early V1, but with different features.- The logo stamping is different and on the right face handle on both sides is a stamp indicating "BOTH HANDLES 9" or 22,5cm"
- On the plierhead the nose is slightly thinner and the upper teath is smoother and less visible to the later V1 counterpart.
- A larger gap under the compound leverage is noticable on the older prototype.
- Finally the ruler on the older prototype starts from the edge of the slipjoint instead of the tool end.
I've emailed Spencer Frazer about it.
He responded and said:
"Hihi . You have the first series of Powerplier where the engraving was somewhat crude. We refined it many times. I don’t think it is more exceptional than that but it definitely is a cool piece and represents our early endeavors in the multi tool industry. Thx for reaching out. Sf"He called it a crude piece XD. To him it's an unfinished product not worthy of being proud of.
This is my first post here, been lurking a while, signed up because Grant told me to.First of all, welcome to MTO
.What a great first post, and what a great find :o.
It's always great when you get to know some "inside info" on a new tool, and certainly when it turns out to be quite something special.
I found this beauty a while ago (see pic), not as special as yours, but to find a SOG over here is already quite special, and to find one of the old ones, new in box is a one in a million deal over here, so I was really happy that I was the one who stumbled upon it :D.

Greatings from Belgium
. -
@Top-Gear-24 said:
First of all, welcome to MTO
.What a great first post, and what a great find :o.
It's always great when you get to know some "inside info" on a new tool, and certainly when it turns out to be quite something special.
I found this beauty a while ago (see pic), not as special as yours, but to find a SOG over here is already quite special, and to find one of the old ones, new in box is a one in a million deal over here, so I was really happy that I was the one who stumbled upon it :D.
Greatings from Belgium
.Die glim, dat is zeer schoon hè.
Thank you for welcoming me here. I have learned much here, time to give something back.Greetings from Duinstreek Kennemerland.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



