PST, PST II Owners Club
-
@gerleatherberman said:
Thank you for the info, wowaboro!Only thing is, there is absolutely no sign the tool has ever been used. It would be odd to have replacement pliers in an unused tool right?.

I had just figured the most likely scenario is that the handles were pulled from old stock, since the dates are so far apart.
And could the notch be there solely because it is a CC head and not a standard head?
I'm not well informed on PSTs, so my thoughts are conjecture at the most. :ahhh
On unused BO PSTs hard wire notch is black coated too, like as all other surfaces.
As I see on your picture and on picture from eBay - edges of notch is just steel color, that is the coating was erased.
Although maybe it's just an optical illusion

-
@wowaboro said:
On unused BO PSTs hard wire notch is black coated too, like as all other surfaces.
As I see on your picture and on picture from eBay - edges of notch is just steel color, that is the coating was erased.
Although maybe it's just an optical illusion

Thank you for that!
I will get it out this evening and take some more pictures. Hopefully it is an illusion. :ahhh@Max Stone said:
Sometimes people try a tool and then put it away. It may have been someone trying to cut a hard wire?
Very true!
Hopefully not though. :ahhh -
There is no damage to the cutters. The notch was definitely intentionally ground into the cutters of an older BO CC pliers head after the fact. The cutters have never cut anything, since I could not see any marring/scratching/discoloring within the cutters. The notch was done with some kind of machine tooling, as the grind is machined, and not done with a file. It is even on both sides in depth and grind angle.




And we keep in mind this is the same company that sold a few tools with USA just ground out of the casting after removing USA from the tools. Is it a stretch to think the notch was ground into some older BO CCs(still in stock) before/around the time the notch was added to the more civilian tools?
Or am I just crazy, and this was joe-blow in his garage with a dremel tool?
-
Interesting GLBM...Joe did a good job

It would be unusual for the factory to machine a tool after finishing the surface, but I imagine that’s not out of the question?

...it will be one of your mystery tools! Still beautiful.

-
@gerleatherberman said:
There is no damage to the cutters. The notch was definitely intentionally ground into the cutters of an older BO CC pliers head after the fact. The cutters have never cut anything, since I could not see any marring/scratching/discoloring within the cutters. The notch was done with some kind of machine tooling, as the grind is machined, and not done with a file. It is even on both sides in depth and grind angle.And we keep in mind this is the same company that sold a few tools with USA just ground out of the casting after removing USA from the tools. Is it a stretch to think the notch was ground into some older BO CCs(still in stock) before/around the time the notch was added to the more civilian tools?
Or am I just crazy, and this was joe-blow in his garage with a dremel tool?
I think this is a likely scenario.
-
Thank you, guys!
Looking around, it appears Bob has a CC PST with notches like to the ones on mine. More round than oval, and placed above the pivot a bit more than later ones.
/topic/6215
My other PSTs with notches look different than Bob's and the BO CC I have.
-
Interesting

-
By a stroke of cheap luck, I'm back in this club. Won this 1996 (my birth year!) for $15 shipped on eBay just now. Looks hardly, if ever used. Pliers are supposedly stiff--I suspect because the tool is not yet broke in. No sheath, however. Guess that's something to get later on.

-
Nice one, cody

-
Nice score, Cody!

-
Congrats Cody!

-
@cody6268 said:
By a stroke of cheap luck, I'm back in this club. Won this 1996 (my birth year!) for $15 shipped on eBay just now. Looks hardly, if ever used. Pliers are supposedly stiff--I suspect because the tool is not yet broke in. No sheath, however. Guess that's something to get later on.
Looks very nice for $15! :o
The file may have some dead places(by the looks of it), but everything else looks perfect.
-
It’s a great pic Steve

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

