Rev Owners Club.
-
Thanks J B I would abuse my Rev way faster than any of my other MTs, just because of the price point..... I try not abuse any MTs but sometime you have to.
'You don't know how good something is till you have to abuse it""
-

Ahhhh...who am I kidding! How in the world will there be "limits" if we do not go beyond them?!?!? I've acid dunked-stone washed it and modified it for THAT same reason! And I won't care if it breaks or gets lost (or given away as a "gateway gift" to an unsuspecting "mt newbie") because of it. May the mayhem begin >:D
-
@Juan el Boricua said:

Ahhhh...who am I kidding! How in the world will there be "limits" if we do not go beyond them?!?!? I've acid dunked-stone washed it and modified it for THAT same reason! And I won't care if it breaks or gets lost (or given away as a "gateway gift" to an unsuspecting "mt newbie") because of it. May the mayhem begin >:D
I like your style
I'm the kind of person who wants the new P2, just so I can take it apart and make it better. I think I void the warranty on every tool I own..you know...Warranty Voider should be a badge lol. >:D >:D
-
'Warranty Voider should be a badge "
I Like that
Well state HG ....That is a good thought

-
I bought one when they first came out, paired it up with a micra. Just dont like the handle splay when using the pliers, quite wide and a bit clumsy. Same for side kick and wingman. Still good tools and quite handy for little edc tasks.
Saw the rising prioces too for side kick and wing man and holy crap 140 for a P-4!! so its still a good alternative starting point. -
@stugumby said:
I bought one when they first came out, paired it up with a micra. Just dont like the handle splay when using the pliers, quite wide and a bit clumsy. Same for side kick and wingman. Still good tools and quite handy for little edc tasks.
Saw the rising prioces too for side kick and wing man and holy crap 140 for a P-4!! so its still a good alternative starting point.Stu, if you have a Dremel or clone (or even a file) it is quite easy to correct the splay. At the pliers stop (the part on the handles where the pliers rest when deployed), grind (or file) 1mm from each handle/side (this to maintain alignment; you can take 1.5- 2mm from just one handle and have the pliers slightly canted; no functional loss, and works as well). You'll end up with a splay similar to the Wave's or PST's, which is a lot more comfortable and, if you happen to have small hands, more functional too. Good luck!
And smurfin price rises!!! Rev now at $40's here!!!!!

-
Juan
Thanks for the tip on reducing the splay, I going to give it a go on one of mine

-
This doesnt seem to be a popular model (and not sure why) but I love mine.
I got mine as a Secret Santa gift. Then the following year, I gave one as a gift. Foor $35, these were a steal, IMO. Too bad its discontinued.
Any reason why I saw alot of flack for this model? Were the reviewers just being too hard on them?
-
To my best understanding, it is a tool geared towards light-duty, like for switch plates, handcrafts, hobbies; has lots of handle splay from the factory (which hinders use of small-handed people, like me), and has no locking mechanism for the tools. Although there are tools like the PST/PST II, sidekick, and Wingman which do not have it, they have a solid spine that traverse the tool's back and gives more tension to hold the tool in place. The Rev has a split spine which I think does not provide a good amount of tension when, for example, torquing down a screw or bolt.
Having said that, I really like that the pliers are not sprung, its lightness, the factory pocket clip, simplicity, and quality. I made some "improvements" on both of mine making them more to my liking (read enjoyimg the heck out pf them!) such as reducing the handle splay, polishing the pliers, reprofiled the flat drivers, and on one of them reprofiled the phillips' driver to accept a removable bit driver (it fits diagonally).
To me, it is a great light duty/ minimalistic tool that works very well to its intended uses (and then some; as I've been hard on the pliers and they've been on par to my PST II's) and for light/complementary EDC.
Hope it helps a bit, and that you enjoy yours!

Edit: Just checked at the Leatherman's web site, and it appears as a current model; also on Amazon, and I've seen it at the big-orange-diy-home-renovation-store!
-
@Juan el Boricua said:
To my best understanding, it is a tool geared towards light-duty, like for switch plates, handcrafts, hobbies; has lots of handle splay from the factory (which hinders use of small-handed people, like me), and has no locking mechanism for the tools. Although there are tools like the PST/PST II, sidekick, and Wingman which do not have it, they have a solid spine that traverse the tool's back and gives more tension to hold the tool in place. The Rev has a split spine which I think does not provide a good amount of tension when, for example, torquing down a screw or bolt.Having said that, I really like that the pliers are not sprung, its lightness, the factory pocket clip, simplicity, and quality. I made some "improvements" on both of mine making them more to my liking (read enjoyimg the heck out pf them!) such as reducing the handle splay, polishing the pliers, reprofiled the flat drivers, and on one of them reprofiled the phillips' driver to accept a removable bit driver (it fits diagonally).
To me, it is a great light duty/ minimalistic tool that works very well to its intended uses (and then some; as I've been hard on the pliers and they've been on par to my PST II's) and for light/complementary EDC.
Hope it helps a bit, and that you enjoy yours!

I would definitely agree with everything you said. It is a lightweight tool and when youre going against something tough, you can tell. However, I have asked many things from this little guy and he came out on top every time.
After now owning a Surge, it almost feels like a toy. I bought the sidekick to have a similar setup as the Rev, but with the SA pliers and saw.
I did have a bit of trouble (with the Rev) cutting a very thick strap to the point where my pliers were stuck in it. I eventually unwedged it and got it to cut. However, task was completed.
And thats why I will continue to buy Leathermans. Different tools for the appropriate job.
Now...which model do I buy next?

-
How 'bout an ST300?!?! (I'm biased 'cause its my favorite: that thing is a beast).
š -
@Juan el Boricua said:
To my best understanding, it is a tool geared towards light-duty, like for switch plates, handcrafts, hobbies; has lots of handle splay from the factory (which hinders use of small-handed people, like me), and has no locking mechanism for the tools. Although there are tools like the PST/PST II, sidekick, and Wingman which do not have it, they have a solid spine that traverse the tool's back and gives more tension to hold the tool in place. The Rev has a split spine which I think does not provide a good amount of tension when, for example, torquing down a screw or bolt.Having said that, I really like that the pliers are not sprung, its lightness, the factory pocket clip, simplicity, and quality. I made some "improvements" on both of mine making them more to my liking (read enjoyimg the heck out pf them!) such as reducing the handle splay, polishing the pliers, reprofiled the flat drivers, and
Edit: Just checked at the Leatherman's web site, and it appears as a current model; also on Amazon, and I've seen it at the big-orange-diy-home-renovation-store!
My bad;sorry! It HAS been discontinued; it still appears in the canadian web page though. ( And no, I'm not canadian, it was because it was the first link I opened!)

-
Ya Ive seen the Rev on the canadian website and other places, but not from LM directly (where I bought mine). No price difference so I bought it straight from the source.
The ST300 looks like a good option. I was considering the Rebar, but the ST300 looks like it except on steroids. And price difference aint much.
-
@Juan el Boricua said:
My bad;sorry! It HAS been discontinued; it still appears in the canadian web page though. ( And no, I'm not canadian, it was because it was the first link I opened!)
I find it odd and sad that the Rev page has just been entirely removed from the LM website. Hopefully it will soon grace the discontinued page.
I like my Rev, it is a very good tool, for the original price(I lucked out and snagged mine for ~$14 during a sale), that I carry for light to medium yard work precisely because it is pretty well made but not valuable enough for me to be too annoyed when I eventually scratch and damage it. They same cannot be said for my Crunch or Charge which, if I'm honest with myself, I baby.
While I don't think it is worth the current asking price (Around $40-45 last I knew) I do think LM needs to have a nice lower cost range that isn't being fulfilled by the Wingman or Sidekick. I think the Rev is better than either of two for several reasons, the main being the spring pliers that are, imho, awful.
I guess I need to pick up another Rev to have a back up now.
-Wes.
-
I do concur with your thinking. Two things would be good for my entry-level tool within this range: either get the Rev/Leap pliers head in the Wingman/Sidekick handles, or give me a solid, one piece spine on the Revs'. Oooohh, and bring it back to $20!
They're so good as mod fodder; had no second thoughts if they were to fail!!

-
Here are mine; together. The "older" is the one with the green/yellow fob, dated 04/17; the "younger" one is 08/17. Both are slightly modified, and if anyone is interested I can list the mods. Comments and critiques welcome.




-
Very nice, Juan.
I guess you could say they are " Juan of a kind"

-

I see some places still have Revs instock.
If I didnt have 3 knives, an SAK and a handful of other LM's to buy , Id buy another. Great value for the $35-40 USD
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login