Day by Day...a Journey down the 91mm Range
-
This topic is my new daily read as I enjoy my tea.

As for the Tinker, lots of folks love it. When I didn't know which SAK to buy for my brothers and dad, they mentioned the Tinker.
It's slim enough to pocket carry like a Compact, but has the Phillips and full opener layer that many like as well.
-
Thanks FB, Rapidray, Aloha

As a minimalist option with good-sized tools, the Tinker is hard to beat. A case of ‘less is more’
Onto the 3-layers tomorrow
-
You're tempting me with these 2 layer 91mms, I don't have one yet but that's going to change
maybe both -
@FolderBeholder said:
Can't wait! My first SAK was a 3-layer!
Always a good choice FB

-
Im definitely following this.

-
Looking forward to more of this thread - great idea
-
Nice Day 3 pics and summary Max!

-
Thanks BadMechanic, Intorikata, VICMAN

-
Max, what a great series you have started here. I'm learning something new each time I read your posts, even though I already have a Compact and Spartan (No Tinker yet, and as you pointed out, I think a Super Tinker would be a better choice first). Each new post has been well thought out and concise. I look forward to following your entire series.

-
Thank you jph_777. I know there are many with more knowledge (and SAKs) than I have, but the fun of this forum is sharing ideas and experiences.

-
I own a couple Tinkers but mainly because they seem to be the SAK that most 91mm specials scales come on.
-
Day 4
Over half the 91mm range is made up of 3- and 4-layer SAKs, clearly the market sweet-spot.
In many ways, the 3 layer SAKs provide the most interesting options, as you are typically picking just one extra tool to squeeze between the blade and opener layers. You have to be just that bit more selective in your choice, and these SAKs have strong identities linked to their individual characters.
There are just four of these middle layer options available; scissors, wood saw, inline Phillips/LED, and a bit driver.
It is the bit driver SAK that gets our attention today, known as the Cybertool Small.
Originally called (and still by many), the Cybertool 29 (for 29 functions), the CT-29 sports one of the most recent tools created by Victorinox; a bit driver that accepts interchangeable, reversible bits.
And there are two party-tricks the CT-29 has up its sleeve; the bit driver is a decent length, giving a reach not far off a full-sized screwdriver, and the CT-29 stores another three bits in a clever swing-out holder that tucks under the driver, each reversible, giving this SAK a total of eight interchangeable options.
Marketed as a tool for computer geeks, the Cybertool is really just a more modern alternative to having dedicated, separate tools. A route also taken by other manufacturers, such as Leatherman and Gerber.
The CT-29 has bigger brothers that we will cover in later days, but even as a 3-layer SAK, the CT-29 is quite wide due to the bit driver. It’s actually a little thicker than the 4-layer Huntsman, making it just about pocketable (but noticeable) for EDC.
Pros:- excellent interchangeable bit driver
- Still has the core Spartan tools
- Supplier with Plus scales
Cons: - More like a 4-layered SAK in size
- Limited to the bits that you get with it
- Expensive
Bottom line:
A fairly significant innovation for Victorinox, the Cybertool adds a tool that is almost as good as a dedicated bit driver, while maintaining the already capable Spartan tool set. Just a shame the driver is incompatible with generic 4mm bits.




-
Great thread Max! The bit holder is a great addition to the Vic line, and I had long considered getting the CT29 - in fact I almost modded my CT lite into this as I really wanted that bit holder to be central, and not off to one side as it is in the CT34, so when I broke up the CT lite for my EDC project of marrying the torch/mag layer from the CT lite to a compact, I toyed around with the layers and settled with my take on the CT34, and a new 3 layer EDC - I plan on packing it with Wera interchangeable mini screwdriver for work when we come to swap message switches over.



-
Very informative thread Max!

I think as this thread progresses you will inspire others to try some of the SAKs they have not considered before.

-
I'm liking Day 4, that's one I wasn't aware of

-
Another excellent day write up! The CT’s are very interesting SAK’s.

-
Thanks VICMAN, Rapidray, Greg.

And nice reinterpretation of the CT-34 with the driver central in the SAK Rizio
-
Cheers, Max
Looking forward to future installations on this thread - I’m certainly learning more about the Vic line-up! 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login