What Traditional Knife are you toting today?
-
Camillus 91 Congress. Helping pick Serrano chili's
-
Sweet Congress buddy !

-
Rapidray-
8cr catches a lot of hell from steel snobs, but personally I vacillate when it comes to steel. Sometimes I want the latest supersteel, sometimes I really don't find it that important. It really depends on my mood I guess.
My favorite knife of all time is the Swiss Army Knife and its steel is far from any type of super steel. The 8cr13mov blades do a fine job in my opinion. If you are truly stuck on the latest supersteel, you probably won't like it, but I have found it works great for me.
The edge geometry is excellent on these if you like a keen slicey edge. Strop an Arkansas Hunter, and it can easily pass for a straight razor.
BTW - There is also a larger version that he used for his Texas Ranger commemorative line that I also bought.
https://agrussell.com/knife/A-G-Russell-2012-Texas-Ranger--RUS-CTR7ER
I can do a side by side pic if you want. -
Well said Spudly! I can cast another vote for 8cr13mov. I have a Spyderco Tenacious in 8cr13mov and it's a great all around working steel! 
-
Bought this barely used Camillus Barlow in saw cut Delrin scales for $19 at a knife show yesterday. Feels solidly built! From quick research, it appears this was made in 70s-80s. I'm one happy puppy!

-
@SAK Guy said:
Well said Spudly! I can cast another vote for 8cr13mov. I have a Spyderco Tenacious in 8cr13mov and it's a great all around working steel! 
I am not a fan of some of the new supersteels, one of the things I like about SAKs is it will go from dull to paper slicing sharp with a few strokes on my lansky turnbox. Where as say s110v may be super hard wearing but a ball ache to sharpen when it does go dull. I was eyeing up a new ukpk which can be bought in several steel options, I have ruled out s110v and will probably go with s30v as it’s a happy medium between hard wearing and ease of sharpening.
-
@spudley112 said:
Rapidray-8cr catches a lot of hell from steel snobs, but personally I vacillate when it comes to steel. Sometimes I want the latest supersteel, sometimes I really don't find it that important. It really depends on my mood I guess.
My favorite knife of all time is the Swiss Army Knife and its steel is far from any type of super steel. The 8cr13mov blades do a fine job in my opinion. If you are truly stuck on the latest supersteel, you probably won't like it, but I have found it works great for me.
The edge geometry is excellent on these if you like a keen slicey edge. Strop an Arkansas Hunter, and it can easily pass for a straight razor.
BTW - There is also a larger version that he used for his Texas Ranger commemorative line that I also bought.
https://agrussell.com/knife/A-G-Russell-2012-Texas-Ranger--RUS-CTR7ER
I can do a side by side pic if you want.Thanks but thats ok. From the link I see it is a little bit larger than what I would carry. The Case Trapper, Buck 112 and the SAK in 111mm are about the largest I like to carry. Any bigger and I would rather be carrying a fixie. Thanks for all the information!

-
@chip said:
I am not a fan of some of the new supersteels, one of the things I like about SAKs is it will go from dull to paper slicing sharp with a few strokes on my lansky turnbox. Where as say s110v may be super hard wearing but a ball ache to sharpen when it does go dull. I was eyeing up a new ukpk which can be bought in several steel options, I have ruled out s110v and will probably go with s30v as it’s a happy medium between hard wearing and ease of sharpening.S30V is usually the high end for me. Then it is an issue of money after that. If I had the money I might go higher.

-
Harvested some grapes with this one. No markings on it, other than "Made in USA" tang stamp. I did have one true Euro-style "Pruning Knife", a 3" closed Maniago-made Antonini (which was really well built, and tough) but lost it a couple years ago.

-
Lots of history with this one, bought this one to repace a stolen one just prior to a vacation trip to SE Asia in 1971, so lots of miles and years on this one. Kind of nice to know that all the pocket wear is from your own pockets. Carbon steel not stainless so it has a nice patina (IMO). And after all of these years the red bone has one tiny chip around one pin and this was definitely not a shelf queen. I like the Case knives from that era.



-
@Rapidray said:
S30V is usually the high end for me. Then it is an issue of money after that. If I had the money I might go higher.
S30v is a premium steel no doubt but now is being used a lot in knives that I would not call expensive.
I don’t know the prices of things in the states but this I consider to be pretty good value for what you are getting and that’s from a retailer I don’t use often as I can pretty much pick up most of the stuff they sell cheaper elsewhere.
https://www.heinnie.com/spyderco-heinnie-haynesr-uk-penknife-g10 -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
