What Traditional Knife are you toting today?
-
@chip said:
I am not a fan of some of the new supersteels, one of the things I like about SAKs is it will go from dull to paper slicing sharp with a few strokes on my lansky turnbox. Where as say s110v may be super hard wearing but a ball ache to sharpen when it does go dull. I was eyeing up a new ukpk which can be bought in several steel options, I have ruled out s110v and will probably go with s30v as it’s a happy medium between hard wearing and ease of sharpening.S30V is usually the high end for me. Then it is an issue of money after that. If I had the money I might go higher.

-
Harvested some grapes with this one. No markings on it, other than "Made in USA" tang stamp. I did have one true Euro-style "Pruning Knife", a 3" closed Maniago-made Antonini (which was really well built, and tough) but lost it a couple years ago.

-
Lots of history with this one, bought this one to repace a stolen one just prior to a vacation trip to SE Asia in 1971, so lots of miles and years on this one. Kind of nice to know that all the pocket wear is from your own pockets. Carbon steel not stainless so it has a nice patina (IMO). And after all of these years the red bone has one tiny chip around one pin and this was definitely not a shelf queen. I like the Case knives from that era.



-
@Rapidray said:
S30V is usually the high end for me. Then it is an issue of money after that. If I had the money I might go higher.
S30v is a premium steel no doubt but now is being used a lot in knives that I would not call expensive.
I don’t know the prices of things in the states but this I consider to be pretty good value for what you are getting and that’s from a retailer I don’t use often as I can pretty much pick up most of the stuff they sell cheaper elsewhere.
https://www.heinnie.com/spyderco-heinnie-haynesr-uk-penknife-g10 -
-
@Rapidray said:
Thanks but thats ok. From the link I see it is a little bit larger than what I would carry. The Case Trapper, Buck 112 and the SAK in 111mm are about the largest I like to carry. Any bigger and I would rather be carrying a fixie. Thanks for all the information!

Size comparison top to bottom:
AG Russell 2012 Ranger (King of the Woods)
AG Russell Arkansas Hunter
Buck 110
Buck 112

Width compared to Buck 112:

-
@Boonies said:
Lots of history with this one, bought this one to repace a stolen one just prior to a vacation trip to SE Asia in 1971, so lots of miles and years on this one. Kind of nice to know that all the pocket wear is from your own pockets. Carbon steel not stainless so it has a nice patina (IMO). And after all of these years the red bone has one tiny chip around one pin and this was definitely not a shelf queen. I like the Case knives from that era.
Well for its age and mileage - it is a nice looking companion

-
@chip said:
S30v is a premium steel no doubt but now is being used a lot in knives that I would not call expensive.I don’t know the prices of things in the states but this I consider to be pretty good value for what you are getting and that’s from a retailer I don’t use often as I can pretty much pick up most of the stuff they sell cheaper elsewhere.
https://www.heinnie.com/spyderco-heinnie-haynesr-uk-penknife-g10Wow...that is an excellent price there! Especially in S30V and they are out! Will check back daily on that one! Thanks

-
@spudley112 said:
Size comparison top to bottom:
AG Russell 2012 Ranger (King of the Woods)
AG Russell Arkansas Hunter
Buck 110
Buck 112

Width compared to Buck 112:

Thank you for an excellent comparison on both models. They are so close it is scary. I do see one difference and the Russell blades are taller, that being a nice thing! And the thickness of the body is a lot slimmer. That is one thick blade on the Russell also!

-
@an0nemus said:
Bought this barely used Camillus Barlow in saw cut Delrin scales for $19 at a knife show yesterday. Feels solidly built! From quick research, it appears this was made in 70s-80s. I'm one happy puppy!
I'd be happy also! :D

@cody6268 said:
Harvested some grapes with this one. No markings on it, other than "Made in USA" tang stamp. I did have one true Euro-style "Pruning Knife", a 3" closed Maniago-made Antonini (which was really well built, and tough) but lost it a couple years ago.

@Boonies said:
Lots of history with this one, bought this one to repace a stolen one just prior to a vacation trip to SE Asia in 1971, so lots of miles and years on this one. Kind of nice to know that all the pocket wear is from your own pockets. Carbon steel not stainless so it has a nice patina (IMO). And after all of these years the red bone has one tiny chip around one pin and this was definitely not a shelf queen. I like the Case knives from that era.
Nothing like an old friend.

@spudley112 said:
Size comparison top to bottom:
AG Russell 2012 Ranger (King of the Woods)
AG Russell Arkansas Hunter
Buck 110
Buck 112

Width compared to Buck 112:

Nice comarison pics.

-
Today... my Texas Jack that Jack got me (I'm having a bit of a GEC rest). This is one of my absolute favourites - it is both immensely capable and pocketable, and a fantastic cutter, especially of wood. It also has the perfect amount of tension in the spring - it doesn't break nails, you can open it with your teeth if you have too, but it still has a smurfing sexy snap when it closes. I love this knife.
Erm... Is Nix blushing yet? 

-
Gorgeous knives everyone

-
Utica jack today

-
@Fuzzbucket said:
Today... my Texas Jack that Jack got me (I'm having a bit of a GEC rest). This is one of my absolute favourites - it is both immensely capable and pocketable, and a fantastic cutter, especially of wood. It also has the perfect amount of tension in the spring - it doesn't break nails, you can open it with your teeth if you have too, but it still has a smurfing sexy snap when it closes. I love this knife.
Erm... Is Nix blushing yet? 

I can see why its a favorite!

@SteveC said:
Utica jack today
Love them EE Jacks!

-
-
@spudley112 said:
Size comparison top to bottom:
AG Russell 2012 Ranger (King of the Woods)
AG Russell Arkansas Hunter
Buck 110
Buck 112

Width compared to Buck 112:

Probably not the point you wanted to make Spudley, but I'm digging the 112 to my surprise

-
@Boonies said:
Lots of history with this one, bought this one to repace a stolen one just prior to a vacation trip to SE Asia in 1971, so lots of miles and years on this one. Kind of nice to know that all the pocket wear is from your own pockets. Carbon steel not stainless so it has a nice patina (IMO). And after all of these years the red bone has one tiny chip around one pin and this was definitely not a shelf queen. I like the Case knives from that era.
Yes, absolutely! Aesthetically I think they were spot on in the 70s. Not only that, but there's still tons of them about and in good (sometimes new) condition and not too expensive either. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login