Shooters Tool
-
@supratentorial said:
The design looks similar to the design of the Bear Jaws. The Phillips driver doesn't look right but it has an integrated bit adapter. Has anyone actually used this tool?I've got a S&W Tool Chest II. It is made in China. Quality is so-so; not as bad as the really junky junk, but not nearly as good as anything made in North America or Europe. You are correct, the phillips screwdriver is almost unusably bad. I can't imagine someone preferring this tool over a SOG.
-
@J-sews said:
I've got a S&W Tool Chest II. It is made in China. Quality is so-so; not as bad as the really junky junk, but not nearly as good as anything made in North America or Europe. You are correct, the phillips screwdriver is almost unusably bad. I can't imagine someone preferring this tool over a SOG.It's weird how the Amazon reviews for the S&W multi-tools (both the Tool Chest II and the 44 MAG tool) are overwhelmingly positive--maybe some of those reviews are written by the employees of Taylor Cutlery! :P
Are any of the parts (i.e. bit driver, scissors) worthy of transplantation into a better tool?
-
@supratentorial said:
It's weird how the Amazon reviews for the S&W multi-tools (both the Tool Chest II and the 44 MAG tool) are overwhelmingly positive--maybe some of those reviews are written by the employees of Taylor Cutlery! :PAre any of the parts (i.e. bit driver, scissors) worthy of transplantation into a better tool?
Funny how you should suggest that about the Amazon reviews...I was about to say the same thing! :D
And no, none of the parts are worth bothering with. :P
I just went and grapped my Tool Chest II. I would like to downgrade the statement I made earlier regarding it's quality. This thing sucks. :(

-
That good huh?
Like any reseller, Amazon doesn't make any money when the review on their site says things like "This is really pretty bad- maybe you should do a search for Leatherman instead" so I am certain many of their reviews are "arranged."
Def
-
No doubt about it. Who in their right mind (business mind) would post a bad review. Although, there are still some of us in the world that are honest. I am being very honest when I say that S&W makes a good gun but they put their good name on really crappy knives and tools. Not being a snob but you can tell that by the price. A good multitool costs about $60 U.S. on average I'd say. Other than a SAK or a Buck a good folding knife costs about $50. You get what you pay for. S&W does not make a cheap gun but their tools sure are cheap.
-
I agree!! Why don't these marketing fools understand? When they put their good name on junky imported products, it degrades the public opinion about their good quality traditional products!
I see it mostly with the American firearms manufacturers. Winchester makes a few dollars by selling their name to someplace like Taylor Cutlery, who then etches it into a truckload of junk from China. People buy the China-Winchester junk, and then associate the crap quality with the name. Now they think that everything Winchester makes - even the traditional firearms - are also crap.
I wonder if they really come out ahead in the long run?
-
@J-sews said:
I wonder if they really come out ahead in the long run?If they didn't, they'd stop doing it...but it looks like they make tons of money off of cheap pocketknives sold at big box stores.. :P
Imagine if they actually put some effort into it and hooked up with Leatherman...they'd get the bix box store exposure, AND have a good product.
-
That's really the benefit of Multitool.org's independence, and why we always strive to show the good, the bad and the ugly of each and every tool reviewed. No manufacturer is paying our bills, and we don't owe them a glowing review of a tool that doesn't deserve it.
Def
-
It's weird how the Amazon reviews for the S&W multi-tools (both the Tool Chest II and the 44 MAG tool)
.44 Mag tool? Ooooh...

-
I just read the description for the .44 Mag tool...
It's the only tool to have a diamond file???
-
You gotta like a man that loves the Redhawk ! If only I'd picked up Redhawks in .357 and .41 Magnums when they were still in production and easily available
-
Man I love wheelguns, but they never look right to me with a scope... just doesn't seem right!
Def
-
Sorry to act like the devils advocate - if you are looking for a tool to do a specific job would the tool or item that comes the nearest to that specification be the one of choice (even more so if it is the only one). The cost of a proper tool would be less than the cost of the damage by using the wrong tools.
These are markets the multi tool makers are loosing out on. Who would remove a choke with a pair of pliers instead of a wrench and who in their right mind would push those pins out or remove screws with the drivers on a multi when most tend to slip. Proper engineered drivers are rarer than hens teeth on most makes of mutis thats why I use 1/4" bits.
Remembering back to when I owned shotguns (ah dreams) I would not have used any multi tool on any of the guns I owned. I bought the right tool for the job so I could sell the gun on if I needed not having to give it away because it had marks on it. Most of the guns I had did not needed many tools anyhow, just a punch a flat screw driver and a wrench as I said for the choke tubes. They could all be put into a multi, and if they ground that screw driver to a proper profile they could not then be excused for the sloppy(slippery) designs they now have.Dave
-
Excellent points as well...
The whole point of the Victorinox Soldier model was that it was all a soldier needed to take down, reassemble and adjust his service rifle.
Def
-
Reminds me of a discussion I often have with US gun nuts. They often look down on us for having to have our semis capped at ten rounds. I usually point out that we don't need 17 rounds because we are better shots! Maybe it's the same with the wheelguns? We don't need no steenkin scopes....
Def
-
I never understood the whole high capacity magazine thing either. The only place they are useful is at the range so I don't have to reload as often. Other than that, I don't see myself getting into any shootouts any time soon...
I actually like revolvers with and without scopes. I use the .44 for hunting, and the scope helps A LOT for that.
-
.44 for hunting? Those terrorist squirrels don't have a chance! >:D
As a security speSmurfpillst I always laughed at guys who looked down on me for only having a ten round clip. They obviously never read that very few armed conflicts (other than full scale military engagements of course) last beyond 5 rounds, and most are decided within the first two shots. That's one of the reasons I actually prefer to work with revolvers nowadays and not semis. If you only have one shot, you sure as hell don't want it to jam! I know jamming is such a slim chance nowadays, and with a properly serviced piece, but the peace of mind is worth it to me.
And, just for the record, I also prefer under barrel lasers to scopes- but then I can't hit what I am shooting at with a pistol anyway! I like them, but they are just a fancy impact weapon in my hands! I'm like the guy in the Superman cartoons that throws his gun after emptying the clip! :P
Def
-
It's funny. Every pistol defense course I've ever taken tells you to take two shots, center of mass, if your life depends on it... then get the hell out of there. What do I need those 15 other rounds for?
I definately agree with you on revolvers. I'd recommend one for anyone. They are simple and reliable, and are easier to shoot (in my opinion) than semi auto handguns.
I personally prefer a revolver for a self defense handgun for a couple of reasons. Ease of use is one, and the other is that they are more intimidating (again, in my opinion). If I'm ever in a position where I need to pull a gun, I want that person trying to kill me to see the shiny metal, see the bullets in the cylinder, realize what it is, and think twice about trying to hurt me. I don't think you get that with some of the smaller auto's. Some of them look like toys...
I'm not trying to start a debate here. It's just my opinion :)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

