Scientist Club Thread
-
Bought my Scientist as a mod, seller was up front so no surprises. Bought it strictly to put in the “watch box” for looking at tiny numbers inside the watches. Nice and thin.........


-
@TennTexan said:
The Scientist is one of my favorite SAK models, no doubt about it. I have an original one that I found NIB with the straight-pin-less Plus scales, and I have a custom Ti Scientist built by our own Syph007. Robert converted the old school plastic magnifier into a brass beauty.A Scientist SAK...I never knew. Very interesting model. I like what Syph007 has done with this. Very nice.

-
@Mechanickal said:
I can report in this club thanks to Marc_in_NS.I never thought to even see a Scientist in the flesh, yet he actualy GAVE it to me about 3-4 months ago! :ahhh
Talking about a RAK...

Again, no surprises here...

-
They’re so good! 👏👏
-
I'd like to join this club!
I liked the Scientist so much, and originals were so expensive, that I was going to mod one from an Explorer and a Compact. Then I ran across one in excellent condition on EBay and snapped it up. I think mine is from 1991-1999, as it has a smooth corkscrew instead of a fluted one. The Plus scales do include a straight pin hole. What a great two layer VSAK.

-
Cool.

-
I have the same version :D
Gifted to me by a forum member now vanished... :(
-
Very nice everyone!
-
@FolderBeholder said:
I haven't seen that movie. I just looked it up and it looks interesting.
It is a very good movie! And he is a very good actor. He has done several really good movies. He plays Sherlock Holmes also. Played Kahn in Star Trek. Really good!


-
Just checked the prices on EBay...oh boy, thats out of my range for sure. I will just watch from the sidelines. I may just mod one from one of the two donors I have saved up.
-
Lots of light today so I thought I'd try shooting outdoors. My Scientists - all four variants that I know of + an Engineer thrown in because it seemed to belong.

Scientist
- 1986: Small "v", grooved corkscrew, spacer on Philips spring, no pin
- c. 1989: Large "V", grooved corkscrew, bump on Philips spring, no pin
- c. 1996: Large "V", solid corkscrew, bump on Philips spring, pin
- 2009: 2.0mm Vss blade, 5x plastic mag glass, shorter locking Philips
Engineer
5. c. 1988: Large "V", grooved corkscrew, spacer on Philips spring, no pin, Technician screwdriver -
@jazzbass said:
Lots of light today so I thought I'd try shooting outdoors. My Scientists - all four variants that I know of + an Engineer thrown in because it seemed to belong.
Scientist
- 1986: Small "v", grooved corkscrew, spacer on Philips spring, no pin
- c. 1989: Large "V", grooved corkscrew, bump on Philips spring, no pin
- c. 1996: Large "V", solid corkscrew, bump on Philips spring, pin
- 2009: 2.0mm Vss blade, 5x plastic mag glass, shorter locking Philips
Engineer
5. c. 1988: Large "V", grooved corkscrew, spacer on Philips spring, no pin, Technician screwdriverNice collection there!

-
Jazzbass, this is amazing. I never knew that the Scientist went as late as 2009 and was produced with the transparent scales and plastic magnifier.
I will check the three I have at home for their distinguishing characteristics.
Myron
-
Wasn't the Transparent one a +B run?
-
@Mechanickal said:
Wasn't the Transparent one a +B run?It was indeed. IIRC it was one of his first runs that was actually produced by the factory. I think some of his earlier models he assembled himself from factory supplied parts.
-
@Mechanickal said:
So he did built his own mods??
I always presumed all runs came from factory...
I'm fairly certain that this is the case. It's interesting because all this is ancient history now 10+ years on, but this is what I remember (and welcome any corrections to my recollection):
Early +B special runs were made by him in his shop using factory supplied parts - in other words, he wasn't buying new/used assembled knives, dissembling for parts, and recreating new models like mere mortal modders. He had some relationship with the factory that allowed him to order the parts he needed to make his knives. He was also apparently trained by Victorinox to hand assemble correctly, and the result was a knife that Victorinox considered "factory" and would actually warranty. He made a couple runs like this including a 91mm Lumberjack, a Yeoman Mechanic, and I think his first run of Yeomans (def not 100% on that last one). +B did two rounds of Yeoman Mechanics, the first he assembled c. 2008-2009 and the second done by the factory in 2011. Both have ruby scales so you can see the rivets through the scales. On the earlier run you can definitely see file marks across the tops of the rivets. The 2011 run the rivet peening is 100% factory.
It was a bit of drama at the time because apparently +B had a very negative (and somewhat vocal) view of the modding community. Some felt this was a bit hypocritical since what he was selling were essentially mods themselves. My understanding of his view was was that his knives were different from that of a regular modder because (a) he was trained and certified by the factory, (b) he was using brand new parts not parts taken from other knives, so his mods were closer to "factory correct" than that of the rest of the community that weren't factory trained and were using parts of questionable provenance, and (c) because of a and b his knives had a Victorinox factory warranty.
I think some people were just put off by the fact that he approached the situation with typical Teutonic bluntness, which may not have been the best approach PR-wise. Whatever the case, AFAIK from 2010 on all his special runs were factory produced, thus resolving the grey area of "mod or factory" that existed around his earlier models. Then he jumped on the "special run alox" gravy train that was big on this board in the early 2010s and the cellidor special runs became fewer and far between.
-
@Myron said:
I will check the three I have at home for their distinguishing characteristics.Please do! The Scientist, being a thin knife of relatively short production life (10 years), doesn't really have a ton of variants. A lot of the tools that went through the typical evolution during this period aren't in the knife (scissors, metal file, key ring attachment), so there's not a ton to go on date with a ton of precision. The third model on the list, c1996, really could have been made any time between 1991-1999. I think the 1996 date comes from the packaging I got with the knife, not by looking at the tools.
There is one more possible variant I can think of to this range that I haven't seen yet. It would slot in between the 1986 and 1989 models above. This variant would be from 1987/88 and have a large "V" tang stamp but still have the brass spacer on the Philips layer.
-
?


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


